• 한국지반공학회논문집
• /
• 제24권5호
• /
• pp.99-106
• /
• 2008

본 논문에서는 보강토 옹벽에 있어서 보강토체 배면에 설치되는 연직배수층의 강우시 간극수압 증가 억제효과에 대한 내용을 다루었다. 이를 위해 먼저 다양한 배수시스템 설치 조건에 대해 유한요소해석 법에 근거한 부정류 침투해석을 수행하였으며 그 결과를 토대로 연직배수층의 간극수압 저감 메카니즘을 고찰하였다. 또한 매개변수 연구 결과를 토대로 다양한 연직배수층의 최적설치 높이를 검토하였다. 그 결과 보강토체 배면에 설치되는 연직배수층은 강우시 보강토체 내외부에 모관흡수력이 감소하는 현상을 억제시킴으로서 전단강도 저하를 억제할 수 있는 것으로 나타났으며 옹벽높이의 50% 정도 높이로 설치할 경우 최적의 효과를 발휘할 수 있는 것으로 검토되었다.

• 에너지공학
• /
• 제8권2호
• /
• pp.224-232
• /
• 1999

캡슐형 잠열재를 이용한 열저장 시스템은 바닥 난방 및 건물 난방에서 매우 효과적인 시스템이다. 이러한 시스템 개발에 필수적인 요소가 열유동 매체가 순환하는 파이프 주변의 캡슐내 온도 분포와 열유동 매체의 유량 등이다. 그러므로 본 연구에서는 3차원 비정상 상태에서 Navier-Stokes 방정식, 난류모델을 비롯한 스칼라 보존 방정식을 적용하여 캡슐 블록의 온도 분포 및 파이프 내의 유동장 해석을 수행하였다. 또한 본 연구와 같이 계산 영역이 특별한 기하학적 현상을 형상(circle+square)인 문제 해결하는데 적용할 수 있는 새로운 격자 생성 기술(MBFGE/CCM)을 개발하였다. 격자계는 파이프에서 원형 격자를 이용하였고, 캡슐 블록에서 사각 격자를 이용하여 다중격자와 미세격자를 결합하여 사용하였다. 본 연구의 목적은 컴퓨터를 이용한 수치해석적 방법을 미세 캡슐을 이용한 축열보드에 적용하여 2종류의 열경계 상태에 대하여 속도와 온도분포를 계산하여 비교분석을 하는 것이다. 온도는 축열 보드의 한 쪽면은 대류면이고 다른 한쪽면은 단열면인 경우(Case 2)보다 양면 모두 단열인 경우(Case 1)일 때 더 높게 상승하였다. 온수 파이프 중심선인 Y=0 에 가까운 영역에서 Case 1과 Case 2사이에 축열 보드 내에서 온도 차이는 확연하게 나타났다. 향후 수치해석의 정확도를 높이고 축열 보드의 열전달 현상을 보다 정확히 계산하기 위해서는 위치 및 시간에 따른 정밀한 온도 측정값이 필요하고 특히 잠열재인 미세 캡슐이 상변화를 하므로 온도 변화에 따른 물질의 비열(C$_{p}$)과 열전달율(λ)을 고려한 방정식이 요구된다.

• 지질공학
• /
• 제12권2호
• /
• pp.215-234
• /
• 2002

지하수댐은 대용량의 지하수를 효과적으로 확보할 수 있는 시설로서 저류수는 유역조건과 대수층조건, 상류부 오염원 분포와 수질에 따라 상수도용, 중수도용, 농업용 또는 공업용 등으로 다양하게 이용할 수 있으므로 적절한 지하수범 설치 방법은 용수부족을 해결할 수 있는 주요 기술의 하나이다. 지하수법을 활성화시키기 위해서는 대수층 위치 및 지층에 맞는 적절한 차수공법의 선택과 정밀한 물막이벽 시공, 대수층 구조·수문·물수지 등의 정확한 분석, 장기적인 지하수 이용계획과 저류역내 수질보전대책 수립, 수위·수질에 대한 장기 모니터링 실시로 지속적인 유지관리, 지속가능한 대용량 취수기술에 대한 조속한 연구, 지하수댐 개발로 인한 주변환경에 미치는 영향에 대한 철저한 분석 및 대책 수립 등이 필요하다. 그리고 해안지역 지하수법에서 발생하는 염수침입 현상을 방지하는 방안으로 물막이벽을 이중으로 설치하는 방법이 있다.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.304-311
• /
• 2012

One of the main features of Drillship or FPSO is a moonpool structure. The moonpool structures have various accuracy tolerances according to their functions and targets. This study is mainly interested in roundness of a circular moonpool structure in FPSO. Because this structure needs abrasion-resistance at which bearing of machine touches on inner wall of moonpool, we should do over-lay welding widely and deeply by using Inconel weld material. But a general over-lay can cause a severe distortion at ship block structure. If we can analyze the roundness by thermal distortion under Inconel over-lay, we can establish a special erection policy by the results. In this study, we designed stress-strain curve for strain-boundary condition analysis by an elasto-plastic material property. The results made us to decide an appropriate ship-block size and policy of crane manipulation will follow for its capacity. If a structure that needs over-lay is not large, solid elements also are not a bad choice for FEM modeling. Therefore we also developed a standard of using strain-boundary method that shell elements are used as over-lay on solid element modeling.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.698-701
• /
• 2007

DAHAN, the first 1 MWe Solar Power Tower system locates north to Beijing where nearby The Great Wall is now under construction with cooperation between China and Korea. Results in predicting the preliminary performance of this central receiver system are presented in this paper. Operating cycles under some typical weather condition days are simulated and commented. These results can be used to assess the impact of alternative plant designs or operating strategies on annual energy production, with the final objective being to optimize the design of central receiver power plants. Two subsystems are considered in the system simulation: the solar field and the power block. Mathematic models are used to represent physical phenomena and relationships so that the characteristics of physical processes involving these phenomena can be predicted. Decisions regarding the best position for locating heliostats relative to the receiver and how high to place the receiver above the field constitute a multifaceted problem. Four different kinds of field layout are designed and analyzed by the use of ray tracing and mathematical simulation techniques to determine the overall optical performance ${\eta}_{field}$ and the spillage ${\eta}_{spill}$.The power block including a Rankine cycle is analyzed by conventional energy balance methods.

• 한국CDE학회논문집
• /
• 제15권5호
• /
• pp.354-361
• /
• 2010

The paper presents an efficient computation of optimal tool length for 5-axis mold & die machining. The implemented procedure processes an NC file as an initial input, where the NC data is generated by another commercial CAM system. A commercial CAM system generates 5-axis machining NC data which, in its own way, is optimal based on pre-defined machining condition such as tool-path pattern, tool-axis control via inclination angles, etc. The proper tool-length should also be provided. The tool-length should be as small as possible in order to enhance machinability as well as surface finish. A feasible tool-length at each NC block can be obtained by checking interference between workpiece and tool components, usually when the tool-axis is not modified at this stage for most CAM systems. Then the minimum feasible tool-length for an NC file consisting of N blocks is the maximum of N tool-length values. However, it can be noted that slight modification of tool-axis at each block may reduce the minimum feasible tool-length in mold & die machining. This approach can effectively be applied in machining feature regions such as steep wall or deep cavity. It has been implemented and is used at a molding die manufacturing company in Korea.

• Journal of Chest Surgery
• /
• 제28권3호
• /
• pp.233-236
• /
• 1995

Subepicardial space is one of the regions in which fat in moderate amount is normally deposited. When excess deposits of epicardial fat occur, penetration or infiltration of fat into the connective tissues between muscle bundles is observed. In some cases with very extensive involvement of epicardial fat,myocardial insufficiency and conduction system defect such as heart block have been implicated. More fat is deposited over the right ventricle than over left and the anterior surface contains more fat than dose the posterior surface. We studied 40 patients who underwent open heart surgery under the cardiopulmonary bypass. This study was designed to evaluate the percentage of the area of epicardial fat of the right ventricular anterior surface, which is more accessible area during the operative procedure. Other variables included thickness of subcutanous tissue of anterior chest wall, the ratio of waist to hip circumference, body weight and age. In conclusion, the amount of the epicardial fat correlates with thickness of the subcutaneous fat of the anterior chest wall and simple linear regression analysis indicates good correlation with body weight. Increased age results in large amount of epicardial fat.

• 한국전기전자재료학회논문지
• /
• 제27권4호
• /
• pp.221-225
• /
• 2014

In modern times, threat of high power electromagnetic wave is increasing. When the electrical grid and communication network are attacked by these high power electromagnetic wave, the whole infrastructure is paralyzed. To protect the infrastructure from these high power electromagnetic wave threat, the shielding facility that can block high power electromagnetic wave is constructed. Also shielding effectiveness evaluation about the constructed facility is important. But, because of space efficiency and saving of construction cost to construct the actual shielding facility, the shielding room wall is generally adjacent to exterior concrete structures. As space between shielding facility wall and concrete structures is very small, arranging the transmitting antenna exterior shielding facility is realistically difficult. Therefore, in this research, The shielding effectiveness measurement plan in the state of exterior narrow space of HEMP shielding facility is presented. And to apply this plan, The influence of shielding effectiveness according to the size of the shielding facility is analyzed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.113-120
• /
• 2005

Soil nailing system can be mentioned to a method of supporting as the shear strength of in-situ soils is increased by passive inclusions. In the general soil nailing system, facing walls are used in two kind of a lattice concrete block or a cast in placed concrete wall. A case of lattice concrete blocks is used in slow slopes greater than 1:0.7. Also, a case of a cast in placed concrete wall is used in steep slopes less than 1:0.5. The cast in placed concrete walls are constructed to 30cm thick together with a shotcrete facing. In this study, the assembling soil nailing method as a new soil nailing system is proposed. This method is constructed assembly using precast concrete panels. Therefore ability of the construction and quality of the facings can be modified than a usual soil nailing system. Also, this method can be obtained the effects that a global slope stability increase, as precast concrete panels is put on cutting face after excavating a slope.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.279-286
• /
• 2005

This study presents experimental results on the heat transfer coefficients in the film boiling region of spray cooling for actual metallurgical process. In this study, the heat flux distributions of a two dimensional dilute spray impinging on a hot plate were experimentally investigated. A stainless steel block was cooled down from intial temperature of about $800^{\circ}C$ by twin fluid (air-water) flat spray. It was found from the experimental results that the heat transfer area was classified into the stagnation region and wall-flow region. In the stagnation region, the experimental data of local heat transfer coefficient was closely correlated with the local droplet-flow-rate supplied from the spray nozzle directly. Thus, the local heat transfer coefficients are in good agreement with the predicted values from the correlations proposed by our previous study. In wall-flow region, however, remarkable differences are observed between experimental data and predicted values because the number of rebound droplets increase with increasing the distance from the stagnation point.