• 제목/요약/키워드: Block frequency

검색결과 1,110건 처리시간 0.029초

LFR기법을 이용한 블럭교체 기법에 관한 연구 (On the study of block replacement policy using LFR)

  • 오재환;김상수김미선
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.499-502
    • /
    • 1998
  • Most popular disk block replacement polices are LRU(Least Recently Used)policy and LFU(Least Frequently Used)policy. The LRU policy replaces blocks according to the most recent reference without considering the frequency of reference. The LFU policy replaces blocks according to the frequency of reference without considering the recently of the reference. In this thesis, a policy called LFR(least Frequently Use & Not Used Recently) disk block replacement policy is presented. The LFR policy subsumes the LFU policy and the NUR policy. The spectrum of the LFR policy exists between the LFU policy and the NUR policy because we co give different weight to each reference of a block. The implementation shows LFR policy outperforms the previously implemente LRU policy.

  • PDF

화강암지역의 암반블록규모 단열체계 분포특성 연구 (Characterization of the Spatial Distribution of Fracture System at the Rock Block Scale in the Granitic Area)

  • 김경수;배대석;김천수
    • 터널과지하공간
    • /
    • 제12권3호
    • /
    • pp.198-209
    • /
    • 2002
  • To assess deep geological environment for the research and development of hish-level radioactive waste disposal, six boreholes of 3" in diameter were installed in two granitic areas. An areal extent of the rock block scale in the study sites was estimated by the lineament analysis from satellite images and shaded relief maps. The characterization of fracture system developed in rock block scale was carried out based on the acoustic televiewer logging in deep boreholes. In the Yuseong site, the granite rock mass was divided into the upper and lower zones at around -160m based on the probabilistic distribution characteristics of the geometric parameters such as orientation, fracture frequency, spacing and aperture size. Since the groundwater flow is dependent on the fracture system in a fractured rock mass, the correlation of the fracture frequency and cumulative aperture size to the hydraulic conductivity was also discussed.

OFDM 시스템에 적용가능한 교번 스위칭하는 다중화 시공간 블록 코딩 기법 (Alternate Time-Switched Multiplexed Space-Time Block Coding technique for OFDM systems)

  • 정혁구
    • 전기학회논문지P
    • /
    • 제65권2호
    • /
    • pp.136-141
    • /
    • 2016
  • This paper proposes an alternate time-switched multiplexed space-time block coding technique for orthogonal frequency division modulation systems. The traditional multiplexed space-time block coding technique can provide more data rate owing to multiple transmit and receive technique, which causes a lot of hardware burden. Alternate time-switched scheme of transmitting time-domain zeros can reduce this hardware burden by half with time-domain switches only. Simulation results show that alternate time-switched scheme has almost same performance with half of baseband and RF modules in comparison with a multiplexed space-time block coding for orthogonal frequency division modulation systems with twice repetitive transmission.

Fast Detection of Copy-Move Forgery Image using DCT

  • Shin, Yong-Dal
    • 한국멀티미디어학회논문지
    • /
    • 제16권4호
    • /
    • pp.411-417
    • /
    • 2013
  • In this paper, we proposed a fast detection method of copy-move forgery image based on low frequency coefficients of the DCT coefficients. We proposed a new matching criterion of copy-moved forgery image detection (MCD) using discrete cosine transform. For each $8{\times}8$ pixel block, the DCT transform is calculated. Our algorithm uses low frequency four (DC, 3 AC coefficient) and six coefficients (DC, 5 AC coefficients) of DCT per $8{\times}8$ pixel block. Our algorithm worked block matching for DCT coefficients of the $8{\times}8$ pixel block is slid by one pixel along the image from the upper left corner to the lower right corner. Our algorithm can reduce computational complexity more than conventional copy moved forgery detection algorithms.

비대칭 결합선로를 이용한 GaAs FET 증폭기의 설계 (Design of GaAs FET Amplifier Using Non-symmetrical Coupled Line)

  • 강희창;진연강
    • 한국통신학회논문지
    • /
    • 제14권2호
    • /
    • pp.146-154
    • /
    • 1989
  • 비대칭2선 마이크로스트립선으로 구성된 DC블록(비대칭 DC블록)을 GaAs FET의 입력과 출력측에 사용하여 임피던스 정합을 시키는 새로운 증폭기 설계방법을 제시하였다. 중심파수 4(GHz)에 대하여 대칭이 되는 주파수특성을 얻을 수 있었다. 비대칭 DC블록은 \ulcorner케패시터의 DC블록의 역할뿐만 아니라 임피던스 정합도 할 수 있다는 큰 장점으로 MC 및 MMIC 용으로 사용 가능하다.

  • PDF

음영 지역을 위한 주파수 공간 블록 부호화 중계기 전송 시스템 (Space-Frequency Block Coded Relay Transmission System for a Shadow Area)

  • 원희철
    • 한국산학기술학회논문지
    • /
    • 제15권9호
    • /
    • pp.5776-5782
    • /
    • 2014
  • 음영 지역 해소 및 셀 커버리지 확대를 위하여 중계기를 활용하는 이동 통신 시스템이 널리 연구되고 있다. 본 논문에서는 중계기를 통해 다중 경로가 확보된 음영 지역에서 주파수 공간 블록 부호를 적용한 SC-FDMA(Single Carrier-Frequency Division Multiple Access) 전송 시스템을 제안하고, 중계기와 수신국 간의 신호 대 잡음 비를 기준으로 음영 지역을 위한 SC-FDMA 시스템의 성능을 비교한다. 중계기에서 복원된 전송 신호에 대하여 주파수 공간 블록 부호를 적용하여 재전송함으로서 중계기 기반 SC-FDMA 시스템의 수신 성능을 크게 향상시킬 수 있다. 본 논문에서 제안된 주파수 공간 블록 부호화 중계기 기반 SC-FDMA 시스템의 신호 대 잡음 비 성능이 단일 중계기 기반 SC-FDMA 시스템보다 $10^{-2}$ 심볼 오류율 수준에서 약 5 dB 개선됨을 실험을 통해 확인할 수 있다.

블록호핑 SC-FDMA 시스템을 위한 순환지연 다이버시티의 지연값 결정 (Delay Determination for Cyclic Delay Diversity for Block-Hopping SC-FDMA Systems)

  • 임민중
    • 대한전자공학회논문지TC
    • /
    • 제46권1호
    • /
    • pp.72-82
    • /
    • 2009
  • OFDMA 시스템에서는 순환지연 다이버시티는 다이버시티 효과에 의해서 시스템 성능을 증대시킨다. 그러나 블록호핑 SC-FDMA 시스템에서 순환지연 다이버시티의 적용은 다이버시티 효과에 의한 성능 증대효과와, 채널이 주파수 선택적이 됨으로-인한 성능의 감소효과가 동시에 발생한다. 따라서 시스템 성능을 최대화하기 위해서는 순환지연 다이버시티의 지연간을 적절히 선택하는 것이 필요하다. 이 논문에서는 이 두 가지 상반되는 효과와 블록호핑 SC-FDMA 시스템에서 순환지연 다이버시티를 적용할 때 순환지연값을 결정하는 방법에 대해 논의한다.

DCT 부호화된 영상에서 계단함수모형에 의한 구획잡음의 제거방법 (Blocky artifacts reduction by step-function modeling in DCT coded images)

  • 양정훈;최혁;김태정
    • 한국통신학회논문지
    • /
    • 제23권7호
    • /
    • pp.1860-1868
    • /
    • 1998
  • 이 논문에서는 DCT를 사용하여 부호화된 영상으로부터 구획잡읍을 제거하는 간단한 알고리즘을 제안한다. 구획 잡음은 구획경계를 중심으로 반대칭의 형태로 나타나므로, 이 논문에서는 DCT 기저들을 이용한 1차원 반대칭 함수로서 구획잡음을 모형화한다. 제안된 잡음모형의 주파수 특성으로부터, 잡음모형의 고주파성분들을 계단함수에 의한 고주파 성분으로 근사한다. 제안된 알고리즘은 $N\;{\times}\;N$ 구획별로 부호화된 영상에 대해 2N차 DCT영역에서 계단 함수에 의한 고주파 성분들을 제거하는 것이다. 또한 이 알고리즘이 공간영역에서 적은 계산량으로 간단히 수행될 수 있음을 보였다. JPEG 알고리즘을 사용하여 부호화된 영상에 대한 실험을 통하여 제안된 방법이 주관적, 객관적으로 우수한 화질을 보임을 알 수 있다.

  • PDF

Fatigue reliability analysis of steel bridge welding member by fracture mechanics method

  • Park, Yeon-Soo;Han, Suk-Yeol;Suh, Byoung-Chul
    • Structural Engineering and Mechanics
    • /
    • 제19권3호
    • /
    • pp.347-359
    • /
    • 2005
  • This paper attempts to develop the analytical model of estimating the fatigue damage using a linear elastic fracture mechanics method. The stress history on a welding member, when a truck passed over a bridge, was defined as a block loading and the crack closure theory was used. These theories explain the influence of a load on a structure. This study undertook an analysis of the stress range frequency considering both dead load stress and crack opening stress. A probability method applied to stress range frequency distribution and the probability distribution parameters of it was obtained by Maximum likelihood Method and Determinant. Monte Carlo Simulation which generates a probability variants (stress range) output failure block loadings. The probability distribution of failure block loadings was acquired by Maximum likelihood Method and Determinant. This can calculate the fatigue reliability preventing the fatigue failure of a welding member. The failure block loading divided by the average daily truck traffic is a predictive remaining life by a day. Fatigue reliability analysis was carried out for the welding member of the bottom flange of a cross beam and the vertical stiffener of a steel box bridge by the proposed model. Results showed that the primary factor effecting failure time was crack opening stress. It was important to decide the crack opening stress for using the proposed model. Also according to the 50% reliability and 90%, 99.9% failure times were indicated.

어린이집 교사의 쌓기놀이에 대한 은유 분석 (Metaphor Analysis on Block Play of Day Care Center Teachers)

  • 이진희;임진형
    • 한국산학기술학회논문지
    • /
    • 제21권2호
    • /
    • pp.287-295
    • /
    • 2020
  • 본 연구의 목적은 어린이집 교사들의 쌓기놀이에 대한 은유의 경향과 은유의 의미를 알아보는 것이다. 이를 위해 J지역 대학의 보수교육에 참여한 어린이집 교사 165명을 대상으로 문장 완성형 은유방법을 활용하여 자료를 수집하였다. 수집한 자료는 은유분석에 관한 선행연구와 쌓기놀이의 가치에 관한 선행연구에 기초하여 질적 연구방법을 활용한 범주화의 과정을 거쳐 분석하였다. 연구결과 첫째, 어린이집 교사들의 쌓기놀이 은유의 경향은 2개 범주, 9개의 하위내용으로 분류되었다. 범주에서는 '쌓기놀이의 특성', '쌓기놀이의 가치'의 순서로 빈도가 높게 나타났다. 하위내용에서는 '쌓기놀이의 특성' 중 '구성하기'가 가장 높은 빈도를 나타냈고, '쌓기놀이의 가치' 중 '성장·발달의 근간'이 가장 높은 빈도를 나타냈다. 둘째, 어린이집 교사들의 쌓기놀이 은유의 의미는 '쌓기놀이의 특성' 에서 '구성하기', '표현하기', '상상하기', '즐거움', '자유로움'으로 나타났고, '쌓기놀이의 가치' 에서는 '성장·발달의 근간', '정서발달', '사회성발달' '창의성발달'로 나타났다. 연구결과를 기초로 하여 직전교육과 현직교육에서 유아 쌓기놀이의 가치와 교사역할이 더욱 강조되어야 함을 논의하였다.