• 감성과학
• /
• 제5권3호
• /
• pp.21-28
• /
• 2002

텍스타일 패턴 디자인에 대한 소비자의 감성을 반영하는 한 방법을 제시하기 위하여 블록 스트라이프 패턴 (block stripe pattern)에 대한 디자인 요소를 조사하였다. 자극물은 명도차(3가지), 배열(2가지), 폭(2가지), 간격(3가지)의 4가지 요소를 조작하여 구성되었다. 36가지 조합 중에서 사전 조사에서 독립적인 감성을 보이는 27개를 최종 자극물이 선정되었으며, 남녀 대학생 30명을 대상으로 감성평가를 실시하였다. 4가지 디자인 요소가 요인분석을 통해 도출된 12개의 감성차원에 미치는 영향을 측정하고, 물리량에 근거한 정량적 분석을 통해 각 자극물과 감성과의 관계를 파악하였다. 각 디자인 요소가 감성에 미치는 영향을 ANOVA 분석한 결과, 명도차, 간격, 폭, 배열의 순서로 의미있는 감성차이를 유발하였으며 명도차는 거의 모든 감성에서 감성차에 영향을 미치는 가장 설명력 높은 디자인 요소로 분석되었다. 디자인 요소 레벨에 따른 감성의 차이를 살펴보면, 폭이 좁을수록 '수수한', '깨끗한', '모던한', '심플한', '편한' 감성을, 간격이 좁을수록 '강렬한', '보수적인' 감성을, 명도차가 작을수록 '고급스러운', '모던한', '수수한', '심플한', '점잖은', 보수적인', '소프트한', '깨끗한', '편한' 감성을 나타내었다. 감성을 요소별 물리량으로 예측한 회귀모형을 도출한 결과, 12개의 감성 중 '보수적인', '캐주얼한', '모던한' 감성을 제외한 모든 감성에 대해 R²가 0.6 이상의 높은 적합도를 보였다. 이 결과를 토대로 소비자 감성이 반영된 2가지 디자인 프로토타입을 제시하였다.

• 한국디지털건축인테리어학회논문집
• /
• 제8권2호
• /
• pp.83-92
• /
• 2008

This study is about architectural design for rural housing block redevelopment for districts with existing residents considering sustainable development. The study suggests development direction focusing on preserving the regional characteristics, and presentation of suburban-style housing complex reflecting on the future tenant's individuality and demand. The preexisting development approach for suburban-style housing complex which was planned by the developer, failed to recognize taste of the future tenants. Profitability being the priority, it also resulted in a serious environmental disruption. In this development however, through a systematic direction for site development and site analysis, conducting surveys through future tenants, attempted for a continuous growth of the community. The study is presented covering the following areas; site's pathway system, nature conservation plan, lot plan, land use, arrangement plan, housing plan and community facility.

• Journal of Chest Surgery
• /
• 제20권3호
• /
• pp.603-609
• /
• 1987

The clinical, investigative, and surgical experiences were reviewed in four patients with congenitally corrected transposition of the great arteries who presented to the National Medical Center between August 1983 and August 1985. This condition is very rare congenital anomaly defined as the combination of atrioventricular discordance and transposition of the great arteries. Examples of primitive [single] ventricle inverted [that is, left sided in situs solitus] with outflow chamber were excluded in this paper. According to the sequential arrangement of the hearts there were two cases of [S,L,L] and two cases of [I,D,D]. The surgical approach should be focused on minimizing the risk of heart block and increasing the degree of relief of pulmonary outflow tract obstruction [POTO]. We experienced complete heart block in two cases of [S,L,L] and significant residual POTO in one case of [S,L,L] and one case of [I,D,D] postoperatively. There were one hospital mortality caused by complete heart block and residual POTO and two delayed mortalities caused by congestive heart failure and sepsis respectively.

• 한국주거학회논문집
• /
• 제22권1호
• /
• pp.35-42
• /
• 2011

The objective of this study is to investigate the functional conformity based on the analysis of the spatial connectivity of block housing using space syntax. Three cases were selected which have important meanings in 1920s. The properties of spatial configuration were derived from an urban-context approach and without urban context analysis, and spatial connectivity and functional conformity were analyzed using references. The results of the study revealed that the arrangement of block housing were different from one another notwithstanding their similar layout characteristics. The relationships between urban streets and housing complexes were identified, and the public spaces were being arranged as semi-public spaces, whereas blocks as private spaces by separating functions. This study provides the implications for the planning of low rise-high density housings by means of analyzing the spatial connectivity of the spatial layout characteristics of European block housing, recognizing the relationships between urban communities and housing complexes.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권6호
• /
• pp.901-903
• /
• 1999

Twenty-four multiparous crossbred Friesian dairy cows (60-90 days in lactation) were randomly assigned into a $2{\times}2$ factorial arrangement in a randomized complete block design. Factors were two levels of concentrate supplementation (1:2, high vs 1:1.2, very high; concentrate:milk yield) and two levels of high-quality feed block (HQFB) supplementation (non vs ad libitum block licking). Ruzi grass (Brachiaria ruziziensis) was fed as a roughage throughout the 70 day feeding trial. High level of concentrate fed group resulted in higher roughage and HQFB intakes, compared with very high concentrate supplemented group. HQFB supplementation tended to increase roughage intake and significantly improved milk yield (2 kg/hd/d in high concentrate supplementation) and quality (% fat) which resulted in higher economical return. HQFB was recommended to be used as a strategic supplement in lactating dairy cows especially when fed on low-quality roughages or crop residues.

• 한국지반공학회논문집
• /
• 제21권10호
• /
• pp.49-60
• /
• 2005

본 논문에서는 중요 설계변수에 따른 계단식 보강토 옹벽의 거동 특성에 관한 연구내용을 다루었다. 이를 위해 기본적인 설계단면을 설정하고, 검증된 유한요소모델을 이용하여 상단의 이격거리 및 상${\cdot}$하단 보강재의 포설길이에 대한 매개변수연구를 실시하였다. 그 결과 이격거리가 증가함에 따라 하단의 벽체 변위와 유발 인장력은 감소하는 양상을 나타냈으나, 현 설계기준에 근거한 상단옹벽 처리기준의 차이에도 불구하고 감소폭이 적어 상단옹벽의 등가상 재하중 선정 시 주의를 요하는 것으로 나타났다. 한편 보강재 포설조건의 영향에 대한 고찰 결과 상${\cdot}$하단 포설길이가 증가함에 따라 각각 벽체변위는 감소하였으나 하단의 유발인장력의 경우 상${\cdot}$하단의 상호작용으로 인해 오히려 증가하는 양상을 보이는 것으로 분석되었다. 그 결과를 토대로 상${\cdot}$하단 보강재의 임계 길이를 산정한 결과 $D=0.25{\sim}0.5H$의 이격거리 조건에 있어 상단은 $0.6{\sim}0.7H$, 하단은 0.6H 정도로 나타났다. 또한 해석결과에 의한 유발인장력과 현 설계기준에 근거하여 산정한 유발인장력을 비교한 결과 현 설계기준은 하단 보강재 하부에서의 유발인장력을 과대평가하고 있는 것으로 나타났다. 본 논문에서는 이러한 연구 결과를 토대로 현 설계기준의 타당성을 검토하였다.

• 대한건축학회논문집:구조계
• /
• 제35권5호
• /
• pp.169-179
• /
• 2019

During the initial design stage of apartment complex, the photovoltaic(PV) system has been considered as an alternative of renewable energy system and planned to install at the rooftop floor level in general. The electric power generation characteristics can be influenced by the block layout, building orientation and roof top structure because of azimuth angle, tilt angle, and partial shading. This study aims to investigate power generation characteristics of photovoltaic system in apartment buildings by considering the partial shading conditions due to the block layout, building orientation and roof-top structures. For the photovoltaic module arrangement planning in rooftop floor level, shading areas were firstly analyzed due to the adjacent building structure. And the annual and seasonal power generation of PV system were analyzed through the PVsyst simulation results. The results show that shading period at the roof top surface can be increased due to the parapet and water tank. Initial design power capacity can be decreased by considering the daily insolation period and distance between PV modules through the shading simulation. As the number of PV modules decreases, the annual power generation can be decreased. However annual power generation per unit area of PV modules can be increased and performance ratio can be increased above 80%. Also the power generation of PV system can be critically affected by building orientation and the performance ratio can be drastically decreased in east-oriented buildings due to the shading problems caused by adjacent structures at roof top level such as parapet and water tank.

• 한국의류학회지
• /
• 제30권1호
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• 대한지리학회지
• /
• 제28권2호
• /
• pp.77-98
• /
• 1993

본 연구는 암설사면지형이 잘 발달하고 다양하게 분포하는 태백산맥의 남부산지를 대상으로 항공 사진판독과 도상계측 및 현지조사를 통하여 노출암설사면의 분포, 형태 및 퇴적물의 특성을 분석하고 사면의 지형적 배열과 지형발달에 관해서 연구한 논문으로써 분포적 특성에 있어서는 애추의 경우 기반암이 경암이거나 절리가 잘 발달된 지질에서, 암괴류의 경우는 화강섬록암 지질에서 높은 분포밀도를 보였다. 형태적 특성은 애추, 암괴류 모두 설상이 각각 83${\%}$, 80${\%}로 가장 많았으며 지형면의 경사도에 있어서는 애추가, 길이에 있어서는 암괴류가 각각 우세했다. 퇴적물의 특성중 암설의 평균입경은 암괴류가 보다 크게 나타났다. 한 지형면에서 암설의 장축방향성의 경우 방향성 있는 경우와 없는 경우가 있는데, 후자는 지형면상의 함몰로 그 방향성이 상실된 것으로 보인다. 끝으로 지형발달의 경우, 애추는 암석낙하(rock fall)에 의한 형성기(최종빙기)와 2차적인 영역에 의한 조정기(후빙기)로 암괴류는 암괴의 생성기(제3가 또는 제 4기의 간빙기), 암괴류의 형성기(최종빙기), 조정기(후빙기)로 구분할 수 있었다. 그리고 산지 사면의 배열유형은 6가지 유형으로 분류되었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.311-317
• /
• 2008

As outdoor environment become worse due to concentration of population in large cities, the importance of environmental control strategies such as the arrangement of green space or water space and ventilation paths, has been increasingly recognized. However, most of the studies focus on the assessment on outdoor thermal environment, few studies focus on the interrelationship between thermal environment in residential block and human thermal comfort. The aims of this study is to develop the outdoor planning method to reduce the heating/cooling load in an apartment unit or entire block by the sustainable approaches in outdoor environmental design. In this paper, on the basis of the prior studies, the effect of the outdoor thermal environment on human thermal comfort will be analysed.