• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.87-95
• /
• 2006

There are hundreds of ship blocks which are under the block assembly, painting, and outfitting assembly works in the pre-erection shops of shipyard. Generally, each block is planned to be processed in a pre-erection shop according to the block type by the long-term production-scheduling before six months. However, many blocks can't be processed in the planned time and the planned shop since the before and after block-processing changes or delays the planned sequential works in pre-erection shops. Therefore, it is essential to monitor the current location of each block and work in process to cope with the changed situation of pre-erection shops. Present study integrates PDA, GPS, and CDMA not only to chase the location of each block but also to exchange the pre-erection work order and the work report between the production-scheduling server and the production managers in the pre-erection shops. This study shows a prototype for the block tracing and process monitoring in the pre-erection shops.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1450-1460
• /
• 2015

본 연구의 목적은 행정중심도시 현상설계안들을 통해 최근에 적용된 다양한 주동 계획 요소들을 분석해 보는 것이다. 이러한 분석을 통해 우리나라 주거단지에 적용되고 있는 다양한 설계 기법과 최근의 설계 동향을 파악해 볼 수 있을 것이다. 왜냐하면 행정중심도시가 비교적 최근에 실시된 주거단지 현상 설계이며, 우리나라의 주요 설계사무소와 건설 회사들이 참여하였기 때문이다. 연구 결과는 다음과 같다. : (1) 판상형 주동은 8가지 유형(ㄱ자형 주동이 가장 많이 적용됨)으로 탑상형 주동은 9가지 유형(일자형, L자형, ㅁ자형 주동이 가장 많이 적용됨)으로 분류되었다. (2) 코어 형태는 대응형이 6가지 유형으로 병렬형이 3가지 유형으로 분류되었다. 두 유형 모두 필로티와 연계된 유형들이 가장 많이 적용된 것으로 나타났다. (3) 지붕 형식은 4가지 유형으로 구분되었는데, 평지붕이 전체 단지의 95%에서 적용된 것으로 나타났다. (4) 주동 매스 형식은 5가지 유형으로(일반형과 보이드형이 가장 많이 적용됨) 분류되었으며 입면 구성은 3가지 유형으로(수평분할형이 가장 많이 적용됨) 분류되었다.

• 자원환경지질
• /
• 제18권1호
• /
• pp.23-39
• /
• 1985

The northeastern part of Ogcheon zone which consisted mainly of Cambro-Ordovician arenaceous, argillaceous and calcareous formations and Carboni-Triassic arenaceous and argillaceous formations is delineated as the eastern mass of a thrust fault along Choongju-Moongyong-Cheongsan in the middle of the zone. The present study proposes a geotectonic line, Imgye-Samchog fault(see, figure 1) which divides the northeastern part into two blocks, Hambacksan block in the west and East coast block in the east. The igneous rocks in the Hambacksan block ranging from granite to gabbro are distributed in a symmetrical zones parallel to general direction of Ogcheon zone as follows (Fig. 2 and Table 2). Southeast igneous rock zone: it aligns Jurassic granites in its south and Precambrian leucocratic granites in its north. Central igneous rock zone: it aligns Cretaceous granites in its south and Jurassic granites, and some of diorite and gabbro in its north. Northwest igneous rock zone: aligns Jurassic granites in its south and huge batholithic granodiorite in its north. The distribution of the igneous rocks in the East coast block shows an entirely different features from those of Hanbacksan block. In the southern part of the block they assemble in a narrow area ranging in age from Early Proterozoic, through Middle to Late Proterozoic, Devonian, Jurassic, Cretaceous to Tertiary, whereas, the igneous rocks in the northern part of the block gathered to a restricted area, in ages of Middle Proterozoic and Cretaceous. The assemblage of the igneous rocks in the studied area shows a compositionally restricted, mixed S-type and I-type granites, $^{87}Sr/^{86}Sr$ > 0.706, rare volcanics and shortening with upright folding. These lithologic and structural features suggest that the igneous activity in this part related intimately to Hercynotype Orogeny of Pitcher(1979). Chronological episodes of igneous activity from Early Proterozoic to Early Tertiary in the northeastern part are figured.

• The Korean Journal of Pain
• /
• 제37권1호
• /
• pp.59-72
• /
• 2024

Background: This study assessed the postoperative analgesic efficacy and safety of the quadratus lumborum block (QLB) in pediatric patients. Methods: Electronic databases were searched for studies comparing the QLB to conventional analgesic techniques in pediatric patients. The primary outcome was the need for rescue analgesia 12 and 24 hours after surgery. Secondary outcomes covered the Face-Legs-Activity-Cry-Consolability Scale (FLACC) scores at various time points; parental satisfaction; time to the first rescue analgesia; hospitalization time; block execution time; block failure rates, and adverse events. Results: Sixteen randomized controlled trials were analyzed involving 1,061 patients. The QLB significantly reduced the need for rescue analgesia both at 12 and 24 hours after surgery (12 hours, relative risk [RR]: 0.45; 95% confidence interval [CI]: 0.01, 0.88; 24 hours, RR: 0.51; 95% CI: 0.31, 0.70). In case of 24 hours after surgery, type 1 QLB significantly reduced the need for rescue analgesia (RR: 0.56; 95% CI: 0.36, 0.76). The QLB also exhibited lower FLACC scores at 1 hour (standardized mean difference [SMD]: -0.87; 95% CI: -1.56, -0.18) and 6 hours (SMD: -1.27; 95% CI: -2.33, -0.21) following surgery when compared to non-QLB. Among QLBs, type 2 QLB significantly extended the time until the first rescue analgesia (SMD: 1.25; 95% CI: 0.84, 1.67). No significant differences were observed in terms of parental satisfaction, hospitalization time, block execution time, block failure, or adverse events between QLB and non-QLB groups. Conclusions: The QLB provides non-inferior analgesic efficacy and safety to conventional methods in pediatric patients.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.1002-1012
• /
• 2001

The work reported here is an extensive study of tendon response to multiple cyclic tests including 3% constant peak strain level test (A-type test), 3% constant peak strain level test with two rest periods (B-type test), and 3∼4% different peak strain level test (C-type test). A sufficient number of specimens were tested at each type of the test to statistically evaluate many changes in response during testing and differences in response between each type of the test. In cyclic tests, there were decreses (relaxations) in the peak stresses and hysteresis, increases in the slack strains, and during lower peak strain level (3%) cyclic block after higher peak strain level (4%) cyclic block in the C-type tests. Considering the results of this study and those of the other study of multiple cyclic tests with rest periods by Hubbard and Chun, 1985, recovery phenomena during the rest periods occurred predominantly at the beginning of the rest periods. Consistently in both studies, the effects of rest periods were small and transient compared to the effects of the cyclic extensions. The recovery with cycles at lower peak strain level (3%) after higher peak strain level (4%) in the C-type test has not been previously documented. This recovery seems to be a natural phenomena in tissue behavior so that collagenous structures recover during periods of decreased demand.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• 대한교통학회지
• /
• 제28권2호
• /
• pp.123-133
• /
• 2010

현재 국내의 횡단보도 설치 관련 기준은 육교 지하차도 및 다른 횡단보도로부터 200m 이내는 중복설치를 금하고 있다. 만약 횡단보도를 설치하고자 할 때는 지방경찰청장이 타당성을 검토하여 설치하도록 규정하고 있으나, 횡단보도의 설치형태와 세부기준은 미흡한 실정이다. 본 연구에서는 Mid-Block상의 버스정류장 배치형태(접근부, 유출부)에 따른 각각의 사고예측모형을 개발하였으며, 사고건수와 사고심각도를 종속변수, 버스정류장과 횡단보도 이격거리, 교통량, 보행량을 독립변수로 하는 포아송 회귀모형식을 개발하였다. 유출부모형의 경우 연간 교통사고 심각도는 버스정류장과 횡단보도간의 이격거리, 교통량, 보행량의 증가에 따라 사고와 양(+)의 관계로 증가하고, 접근부 모형의 경우는 교통량, 보행량의 증가에 따라 사고와 양(+)의 관계로 증가하지만 버스정류장과 횡단보도간의 이격거리는 음(-)의 관계로 분석되었다. 따라서, 교통사고를 최소화할 수 있는 버스정류장과 횡단보도 이격거리는 횡단보도 접근형과 유출형의 혼합형인 횡단보도의 경우는 이격거리 65m일 때 최적의 배치형태로 분석되었으며, 유출부와 접근부 사고 모형식을 통해서 얻은 최적 이격거리가 60m~70m로 나타났다.

• 전자공학회논문지S
• /
• 제34S권2호
• /
• pp.33-42
• /
• 1997

In this paper, a video coding method in wavelet transformed multi-resolution image using variable block sized motion estimation and multi-codebook is proposed. In the propoed method, the accuracy of motion estimation is increased by using variable block matching algorithm based on edge type of blocks which estimation is increased by using variable block matching algoritm based on edge type of blocks which is classified accoridng to the magnitude of wavelet coefficients in vertical subband and horizontal subband of the highest layer. Also, we increased the flexibility of bit allocation and decreased vector quantization error for motion compensated error transmission by using importance of each subband. Some experimental results confirm that he proposed mothod has fine reconstructed images without blocking effect at low bit rate, and especially reconstructs edges well to which human eyes are sensitive.

• 한국주거학회논문집
• /
• 제13권6호
• /
• pp.111-120
• /
• 2002

The purpose of this study is to understand the trends of urban housing in the age of modernization in Western cities since 1970's, and to provide the useful data for diversifying urban housing types in Korea. Although the housing types can be categorized in many ways according to the points of view, this study classifies 11 types by a criterion of urban composition elements. Among 11 urban housing types, one type, free-standing slab structure, has been mainly applied to Korean situation. The reason might be that the free-standing structure type is the most efficient one in terms of land use and block organization, but it results in a monotonic condition of urban housing blocks. Therefore, taking local characteristics and urban contexts in Korea into consideration, the future urban housing design should be developed in different ways of making local life styles possible in them, by adopting various types of Western urban housing precedents.

• 한국멀티미디어학회논문지
• /
• 제20권10호
• /
• pp.1655-1661
• /
• 2017

A high-speed directional interpolation algorithm based on the pattern of a $2{\times}2$ pixel block is proposed in this paper. The basic concept of the proposed algorithm is started from UDWT(un-decimated discrete wavelet transform), but there are no transform operations. In order to detect the direction of the edge, 4-pixel differences of two pairs in the $2{\times}2$ block are compared. The $2{\times}2$ block patterns are grouped into total 8 classes, and thereafter the directional interpolation is executed according to the type of the pattern. Since the calculation of the proposed algorithm is very simple and needs a few additions on integer data type, the computation time is almost same as that of bilinear interpolation algorithm. However, experimental results show that the output quality of the proposed one is better than those of the conventional interpolation ones in the objective quality and the computation time.