• 수산해양기술연구
• /
• 제50권4호
• /
• pp.542-550
• /
• 2014

We investigated biomass, diatom species and fucoxanthin contents as cell growth, fatty acid and amino acid contents as nutritional composition of diatoms attached on plate to confirm effects of light emitting diodes (LEDs) due to block off natural light. In the single LED irradiation, biomass showed significantly higher to $30.0{\pm}6.48mg/m^2$ in white LED than that of others (P<0.05). The dominate diatom species was Navicula cancellata. Their lipid contents showed significantly higher to $112.9{\pm}19.23ug/mg$ dry matter (DM) in control than that of others LEDs. But eicosapetaenoic acid (EPA) contents showed significantly higher to $3.3{\pm}0.62ug/mg$ DM than others, but not significantly differed with natural control light treatment (P<0.05). And total protein contents are higher in control and blue LED light than that of others, but essential amino acid contents showed significantly higher to $3.2{\pm}4.8%$ in control (P<0.05). In mixing light with natural and LED light, biomass showed $2.6{\pm}0.22mg/m^2$ in blue LED (P<0.05). Fatty acids contents were not significantly differed with all treatments. Amino acid contents showed to $11.0{\pm}0.33ug/mg$ DM in white LED (P<0.05), but not significantly differed with others LED lights (P>0.05). Therefore, we could suggest that irradiation of blue LED in natural light very benefit to diatom culture for larvae of sea cucumber and abalone and do on.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권8호
• /
• pp.1246-1250
• /
• 1999

Rabbits (48) of Soviet chinchilla (24) and White giant (24) were fed from 6 weeks to 12 weeks of age intensively on either of four isonitrogenous - isocaloric diets containing 0 ($D_1$), 5($D_2$), 10($D_3$) and 20($D_4$) percent raw neem seed kernel cake (NSKC), respectively as per NRC (1977) requirements in a Randomized block design and slaughtered at the end to find out differences in their carcass traits due to NSKC feeding. Dietary treatment had no significant effect on weight of edibles and inedibles and their percentages and dressing percentage in terms of carcass, carcass with pluck and carcass with pluck and head. Similarly, the meat-bone ratio of various primal cuts and overall carcass, yield of edibles per unit of inedibles and eye muscle area were not influenced due to the dietary variations. Chemical composition of fresh meat, and organoleptic evaluation of cooked meat with and without salt did not vary significantly due to incorporation of NSKC in the diets. The rabbits fed 20% NSKC ($D_4$) though consumed more (p<0.05) DM and DE per kg meat production, the intake of crude protein and total digestible nutrients was similar with other dietary treatments. Feed cost per unit meat production was, however, lower on 5 and 10% NSKC containing diets by 7.75 and 12.56%, respectively, as compared to deoiled ground nut cake containing control diet. It appears that NSKC could be used as a wholesome vegetable protein supplement upto 10% in diet of rabbits without any adverse effect on commercial carcass traits.

• 한국추진공학회지
• /
• 제21권2호
• /
• pp.102-110
• /
• 2017

발사대시스템의 산화제공급계(Liquid Oxygen Filling System)는 발사체의 추진제(Propellant) 중 연료의 연소를 위한 산화제(Oxidizer)로 사용되는 액체산소(Liquid Oxygen)를 저장하고, 발사체 요구조건에 맞게 공급하는 하는 설비이다. 본 논문에서는 한국형발사체(KSLV-II) 발사대시스템 상세설계(Critical Design, 2015년 8월에서 2016년 4월, 8개월) 동안 수행된 한국형발사체 발사대시스템 추진제 공급설비의 산화제공급계 설계 내용을 주요 설비 구성에 대하여 구조적 관점으로 소개한다.

• 한국유체기계학회 논문집
• /
• 제17권3호
• /
• pp.19-24
• /
• 2014

Development of long-term mobile energy sources for mobile robots or small-sized unmanned vehicles are actively increasing. The micro gas turbine generator (MTG) is a good candidate for this purpose because it has both of high energy density and high power density, and 500W class MTG is under development. The designed MTG can be divided into 2 main parts. One part consists of motor/ generator and compressor, and the other one consists of combustor, recuperator and turbine. 500W class MTG is designed to operate at ultra-high speed of 400,000 rpm in high turbine temperature over $700^{\circ}C$ to improve the efficiency. Because the magnetism of NdFeB permanent magnet for the motor/generator could be degraded if the temperature is over $150-200^{\circ}C$, MTG needs the thermal insulation to block the heat transfer from combustor/turbine side to motor/generator side. Moreover, the motor/generator is allocated to get the cooling effect from the rapid air flow by the compressor. This study presents the experimental results to verify whether the thermal insulator and air flow are effective enough to keep the motor/generator part in the low temperature less than $100^{\circ}C$. From the motoring test by using the high temperature test rig, it was confirmed that the motor/generator part could maintain the temperature less than $50^{\circ}C$ under the condition of 1.0 bar compressed air.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.77-83
• /
• 2014

The vessel of integral reactor contains its major primary components such as the fuel and core, pumps, steam generators, and a pressurizer, so its size is proportional to the required space for the installation of each component. The steam generators take up the largest volume of internal space of reactor vessel and their volumes is substantial for the overall size of reactor vessel. Reduction of installation space for steam generators can lead to much smaller reactor vessel with resultant decrease of overall cost for the components and related facilities. A printed circuit heat exchanger is one of the compact types of heat exchangers available as an alternative to conventional shell and tube heat exchangers. Its name is derived from the procedure used to manufacture the flat metal plates that form the core of the heat exchanger, which is done by chemical milling. These plates are then stacked and diffusion bonded, converting the plates into a solid metal block containing precisely engineered fluid flow passages. The overall heat transfer area and pressure drops are evaluated for the steam generator based on the concept of the printed circuit heat exchanger in this study. As the printed circuit heat exchanger is known to have much larger heat transfer area density per unit volume, we can expect significantly reduced steam generator compared to former shell and tube type of steam generator. For the introduction of new steam generator, two design requirements are considered: flow area ratio between primary and secondary flow paths, and secondary side parallel channel flow oscillation. The results show that the overall volume of the steam generator can be significantly reduced with printed circuit type of steam generator.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.35-47
• /
• 2017

A comprehensive survey of the available literature showed that in the last few decades, there has been a growing interest in the use of thermoplastic vulcanizates (TPVs). TPVs are the second largest group of soft thermoplastic elastomers (TPEs) after styrene-based block copolymers, and offer a wide range of potential and proven applications, including in mechanical rubber goods, under-the-hood applications in the automotive field, industrial hose applications, electrical applications, consumer goods, and soft touch applications. Over the last two decades, TPVs have shown a strong and steady market growth (~12% per year). Commercialized TPVs are commonly based on blends of ethylene propylene diene monomer (EPDM) rubber and polypropylene (PP), and to a lesser extent on combinations of butyl or nitrile rubber with PP. EPDM/PP TPVs are characterized by finely dispersed crosslinked EPDM rubber particles (particles size varying between 0.5 and $2.0{\mu}m$) distributed in a continuous thermoplastic PP matrix. If the rubber particles of such a blend are small enough and if they are vulcanized well enough, then the properties of the blend are generally improved. This review article introduces various topics and aspects relevant to EPDM/PP TPVs. The development of TPVs, the use of various types of crosslinking systems and co-agents as crosslinking agents for PP/EPDM blends, the morphology and rheology of TPVs, and their typical end-use applications are also reviewed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권7호
• /
• pp.913-917
• /
• 2000

Sixteen adult Barbari bucks were divided into 4 homogeneous groups, each group was offered wheat straw (WS) at levels 75, 100, 125 and 150 per cent of ad libitum intake in a factorial randomized complete block design. All goats were uniformly fed a supplement ($13.5g\;DM/kg\;W^{0.75}$) to fulfill their requirement for protein at maintenance level. The experimental feeding of goats at different levels for 21 days was followed by a digestion trial of 6 days and determination of rate of passage of digesta for 144 h duration, respectively. Intake ($g/kg\;W^{0.75}$) of dry matter (DM), organic matter (OM), digestible DM and digestible OM increased with increase in amount of WS offered. The levels of WS refusals for obtaining upper limit of intake was found to be above 30% of DMO. Concentration of ADF and lignin was significantly lower and CP was higher (p>0.05) in food ingested relative to food offered or refused in response to increasing allowance of WS. Dietary means of particulate rate of passage from rumen, transit time and total mean retention time ranged from 0.032 to 0.036/h, 19.10 to 21.72/h and 58.61 to 61.53/h respectively and did not show significant differences (p>0.05) irrespective of dietary level of WS. The results suggest that DMI and quality of ingested WS would improve with higher rates of offer and refusals (${\geq}30%$ of DMO) without any pronounced effect on passage kinetics of digesta, because of the greater opportunity afforded to goats for selective feeding.

• 대한한의학방제학회지
• /
• 제28권1호
• /
• pp.71-80
• /
• 2020

Obejectives : The purpose of this study was to investigate the effects of Yijin-tang on pacemaker potentials of small intestinal interstitial Cells of Cajal (ICC). Methods : To dissociate the ICC, we used enzymatic digestions from the small intestine in mice. The electrophysiological whole-cell patch-clamp configuration was used to record pacemaker potentials in the cultured ICC and the in vivo effects of Yijin-tang on GI motility were investigated by calculating percent intestinal transit rates (ITR). Results : 1. The ICC generated pacemaker potentials in the murine small intestine. Yijin-tang produced membrane depolarization with concentration-dependent manners in the current clamp mode. 2. Pretreatment with a Ca²⁺ free solution and thapsigargin, a Ca²⁺-ATPase inhibitor in the endoplasmic reticulum, stopped the pacemaker potentials. In the case of Ca²⁺-free solutions and thapsigargin, Yijin-tang did not induce membrane potential depolarizations. 3. U73122, a phospholipase C (PLC) inhibitors, blocked the Yijin-tang-induced membrane potential depolarizations. However, U73343, an inactive PLC inhibitors, did not block. 4. In the presence of protein kinase C (PKC) inhibitors, staurosporine or Rottlerin, Yijin-tang depolarized the pacemaker potentials. However, in the presence of Go6976, Yijin-tang did not depolarize the pacemaker potentials. 5. In mice, intestinal transit rate (ITR) values were significantly and dose-dependently increased by the intragastric administration of Yijin-tang. Conclusions : These results suggest that Yijin-tang can modulate the pacemaker activity of ICC through an internal/external Ca²⁺ and PLC/PKC-dependent pathway in ICC. In addition, Yijin-tang is a good candidate for the development of a prokinetic agent.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.39-45
• /
• 2016

Purpose: The purpose of this study is to analyze the energy saving and cost benefit analysis of the Low-income Energy Efficiency Treatment Program supported by KOREF(Korea Energy Foundation). This program was launched in 2007 and performs building energy retrofit for the low-income and energy poverty houses. Method: Energy simulation and cost benefit analysis were accomplished for the low-income detached houses. The structure of detached house was a lot og block structure, wood frame (single glass) and concrete roof. Baseline model of the low-income detached houses was proposed. Result: Annual heating energy consumptions were decreased by about 3.2% with the window system replacement(Case 1), 9.3% with reinforcement of insulation(Case2), and 12.5% with both(Case 3) compared to those of baseline model. The construction cost will be recouped within 5 years for the Case 1, 3 years for the Case 2, and 3 years for the Case 3. Case 3 was the most cost beneficient construction method in the analyzed cases in this study.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.310-319
• /
• 2019

Although mud shrimp (Upogebia Major) provides benefits on the tidal flat ecosystem, it is causing the mass mortality of Manila clam (Tapes philippinarum) and large economic loss to the aquaculture farmer due to spreading in the entire coastal clam farm area of the West Sea of Korea. In this study, a mud shrimp blocking box for cultivating clam was tested to prevent the mud shrimp from invading the habitat of the clam. To determine the effect of the blocking box, the growth characteristics of the clams under various culture conditions were investigated. The shell length, total weight, condition index, the presence of mud shrimp in the box, and the soil decay in the box were examined according to whether the clams were raised in the box or in natural state, whether the box is covered with a net or not and the gap size of the box. As a result, no significant differences in shell length, total weight, and condition index were found between the clam grown in the box and the natural state (P>0.05) without any evidence of invading of mud shrimp to the box. In addition, the soil inside the box was in good condition, not decayed. Therefore, using the mud shrimp blocking box, mud shrimp can be prevented from propagating to the habitat of the clam, thereby contributing to the normal production of the clam and thus to restoring the clam farming.