• Korean Journal of Human Ecology
• /
• v.14 no.3
• /
• pp.433-439
• /
• 2005

In this study, we investigated the morphological and physical changes of hair after bleaching treatments with different concentration of hydrogen peroxide in bleaching agent (3, 6, 9, or 12%) and various treatment time (10, 30, or 60 minutes). Tresses of virgin black hair were bleached using a commercial ammonium persulfate-hydrogen peroxide solution. The tensile strength of virgin hair treated with a bleaching agent depended on the concentration of hydrogen peroxide and the treatment time. As the concentration of hydrogen peroxide in bleaching agent went high and the treatment time increased, the tensile strength of the hair increased but the extension degree decreased. The virgin hairs which were not treated by bleaching agent showed morphologically healthy cuticle, whereas the bleached hairs showed swelled and damaged cuticle patterns. The swelling of the hair and the breaks of the cuticles increased positively by the concentration of hydrogen peroxide and the treatment time. These results suggest that exposure to more concentrated hydrogen peroxide with other bleaching components may lead to more severe hair damage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.5
• /
• pp.595-601
• /
• 1994

This study was accomplished to investigate drape coefficient and wrinkle recovery of brushed fabrics according to treatment processes and brushing conditions. For this study, grey fabrics of blended ratio of polyester 65% : cotton 35% were bleached and dyed. These fabrics were then brushed 1, 3, 5 and 7 times. Drape coefficient and wrinkle recovery of brushed fabrics were measured by drape tester and shirley crease recovery tester respectively. The experimental results were analysed statistically to relate mechanical properties, handle, drapability, and wrinkle recovery 1) Drape coefficients of dyed fabric showed lower values and wrinkle recovery showed higher ones than those of bleached and dyed fabrics. Especially dyed fabric brushed 3 times showed good appearance and form stability. 2) Considering the blocked properties that contribute to the drape coefficient and wrinkle recovery of brushed fabrics, bending and shearing properties had a high degree of correlation with brushed fabrics, and 2HB/W showed a high positive correlation with drape coefficient and a high negative correlation with wrinkle recovery.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2105-2119
• /
• 2015

This paper reported the experimental result of dielectric properties of Refined, Bleached and Deodorized Palm Oil (RBDPO) combined with 0-50% of Refined, Bleached and Deodorized Soybean Oil (RBDSO). The dielectric strength and relative permittivity of RBDPO/RBDSO was higher compared to mineral oil at all ranges of ratios and temperatures which indicated a positive sign for its possible use as insulating liquid in a transformer. All ratios of the RBDPO/RBDSO mixture also demonstrated lower dissipation factor compared to mineral oil at 40℃, 70℃ and 90℃. Apart from that, the kinematic viscosity for the oil mixtures shown exceeded the IEC 60296 as well as the mineral oil results. 70%RBDPO/30%RBDSO mixture ratio was chosen as the best mixing percentage after comparison was made with the mineral oil and IEC 60296 standard where the mixture accumulated the most satisfactory of dielectric properties hence making it as the potential candidate for palm and soybean-based transformer oil.

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.219-227
• /
• 2015

This study aims to propose a method to reduce hair damage after investigating the following: the factors which vary depending on hair treatment conditions; the degree of hair damage in the bleached sample; and an analysis of the effects of a perm on wave formation. To determine the effects of these treatment types, hair bleach was mixed with the hair treatment, and hair damage and formation of permanent waves were examined. Using a scanning electron microscope, in addition, morphological changes were analyzed and the following results were obtained: After mixing natural powder(2.5g) and hair cream(2.5g) and bleaching the mixture, it was compared to the scale structure of untreated hair. When 5g of natural powder was mixed and bleached, a clear layer was observed among cuticle scales, showing the effects of hair treatment. Therefore, this confirms that the effects of hair treatment were most notable when grain powder was mixed with hair cream. Once hair is damaged, it is almost impossible to regain its original state. When chemical agents are used, therefore, it is important to consider the possible hair damage they cause.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.395-400
• /
• 2006

Polylactic acids polymer (PLA) was applied as an additive to improve the strength properties of handsheets prepared from three unbleached southern pine kraft pulps with different kappa number and an aspen bleached chemithermomechanical pulp (BCTMP). The results showed that PLA could greatly improve the tensile and burst strength of the pulp handsheets. Heat pressing effect was also important to enhance the strength properties. For unbleached kraft pulps, it was found that an appropriate amount of residual lignin in pulps had a positive effect on the handsheets strength improvement when adding PLA. The thickness of the handsheet did not change the PLA strengthening effect. In general, PLA effect on tear strength improvement could be neglected. However, it had a significant effect on the improvement of tear strength for the aspen BCTMP handsheets not containing sufficient amount of fines.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.18-23
• /
• 2015

In this study, the effects of cationic fatty acid bulky promotor on the properties of BCTMP (bleached chemithermomechnical pulp) handsheet including bulk and strength were elucidated. As results, it was observed that the bulk of BCTMP handsheet increased with the increases of the concentration of cationic fatty acid bulky agent, while mechanical properties such as tensile strength and burst strength decreased. The opacity of BCTMP handsheet also increased with the increases of the concentration of cationic fatty acid bulky agent, while brightness was almost not changed. The effectiveness of bulky agent with SwBCTMP (softwood) was higher than that with HwBCTMP (hardwood). Compared with previous research on the effect of bulky agent on BKP handsheet, the bulk increase of BCTMP handsheet was greater compared to that of BKP handsheet. However, the reduction of mechanical property in BCTMP handsheet was lower than that of BKP handsheet.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.3
• /
• pp.46-52
• /
• 2002

To produce the raw material used for printing and writing paper or high quality tissue, MOWs that were consisted of white ledger, colored ledger and old newspaper were bleached with EoP and EoPY(FAS) method, the EoP bleaching process gave the improvement in brightness and a high color removal efficiency. Especially, MOW B(initial brightness: 59.1％ ISO) that contained much old newspaper showed the higher bleaching efficiency than those of MOW A(initial brightness: 68.3%). After EoPY(FAS) bleaching, MOW's brightness was increased from 68.3% ISO to 84.3∼84.0% ISO, and from 59.1% ISO to 78.7∼79.2% ISO, respectively. Also the tensile and burst index of bleached pulps decreased by 10∼30%. The tear index slightly decreased or halted at the same range as unbleached pulps.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.51-58
• /
• 2008

This paper presents the effect of acid treatment on the removal of metals and the brightness of pulp. The bleached kraft pulps, metal-absorbed pulps and recycled pulps((ONP, OCC, MOW, and SC) were treated with the acidic solutions. Among metals in the bleached kraft pulps, Cu, Ca and Mg were removed easily by the acid washing, whereas Fe, Al and Si were not removed. The acid washing also removed distinctly metals from the metal-absorbed pulps. The metals absorbed in pulps reduced the brightness (%, ISO). Especially, Fe was the most detrimental metal. However, the brightness which was decreased by metals was restored to the status quo by the acid washing. The level of metals in recycled pulps was gradually reduced after the first flotation and acid treatment. Hence, the degree of metal removal by the acid washing was mainly dependent upon the kinds of waste pulps and metal ions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.1-8
• /
• 2011

The presence of high silica in bamboo hinders the use of this material for production of rayon grade pulp. Research has been carried out to overcome this deficiency and improve quality of rayon grade pulp with the modification in pulping and bleaching process. Effect of acid boosted water prehydrolysis, sulphuric acid pre-treatment of unbleached pulp, chlorination stage at lower pH and treatment of bleached pulp with $SO_2$ water were evaluated. Acid boosted water prehydrolysis of chips reduces prehydrolysis time by 50 minutes as compared to water prehydrolysis. Treatment of unbleached pulp with sulphuric acid reduces ash, acid insoluble, silica, calcium and iron contents of the pulp by 56, 31, 82, 84 and 60% respectively. The addition of acid, increase in kappa factor in $C_D$ stage and combination of both were effective in removing silica in the pulp. Treatment of final bleached pulp with $SO_2$ water removes silica to a great extent and improves optical properties of the pulp as compared to $H_2SO_4$ or PAA. Pretreatment of the pulp with acid and modification in the bleaching process can reduce silica substantially and improve the quality of rayon grade bamboo pulp.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.230-236
• /
• 2014

The kapok fibers which are the functional fiber materials having natural hollows are environment friendly materials the demand and interest of which are increasing. The kapok fibers are environment friendly and natural hollow fibers which are 5-8 times lighter than cottons and have excellent performances in thermo keeping property, air permeability, bulkiness and resilience. In this study, the pretreatment according to the dyeing behaviors of kapok fibers were studied. Pretreatment(scouring, bleaching) were a variety of conditions. Scouring and bleaching, images of changed surfaces and cross-sections and dyeing behaviors of the dye-o-meter according to the concentration measured in meters and compared. Although the final exhaustion ratio of the kapok fibers scoured with a high concentration recipe was almost as same as that of the kapok fibers bleached with a high concentration recipe, the initial absorption speed of the kapok fibers scoured with the high concentration recipe was faster than that of the kapok fibers bleached with the high concentration recipe.