• 제목/요약/키워드: Blasting vibration velocity

검색결과 127건 처리시간 0.027초

건공화 공법의 발파 성능 평가를 위한 현장 시험에 관한 연구 (A Study of a Pilot Test for a Blasting Performance Evaluation Using a Dry Hole Charged with ANFO)

  • 이승훈;정성훈;최형빈
    • 대한토목학회논문집
    • /
    • 제42권2호
    • /
    • pp.197-208
    • /
    • 2022
  • 암반층이 얕은 깊이에서 출현하는 국내 지층 조건과 지하 공간의 활용도 증가로 인해서, 발파에 의한 굴착은 여전히 이용되고 있다. 발파 천공 이후에 존재하는 물이 있는 조건에서 실시되는 표준 발파는 폭굉압력 감소, 일정 장약량 사용, 디커플링과 같은 기술적인 어려움이 있다. 하지만, 기존의 표준 발파 공법을 대체할 만한 공법이 없는 실정이다. 본 논문에서는 건공화 펌프 시스템을 이용하여, 천공 내부에 존재하는 물을 제거하는 건공화 ANFO (Ammonium Nitrate Fuel Oil) 발파와 발파 성능의 비교를 위해서 추가적으로 표준 발파를 수행하였다. 각각의 발파 공법에서 계측된 진동 속도 데이터들과 환산거리의 함수로 이루어진 경험적인 발파진동 추정식을 이용하여, 최소제곱법에 의한 선형회귀분석을 실시하고, 궁극적으로 발파 성능을 정량적으로 분석하였다. 그 결과, 건공화 ANFO 발파에서 진동 감쇠가 더 크게 발생하고, 암반 파쇄에 더 많은 에너지를 소비하여, 더 가까운 거리에서 진동 허용 기준을 만족하는 진동 속도를 보였다. 또한, 표준 발파의 발파 진동 영향권이 건공화 ANFO 발파보다 더 멀리 있고, 발파 패턴의 범위가 더 넓은 것으로 나타났다. 본 연구에서 수행된 현장 발파 실험 결과로부터, 건공화 ANFO 발파 공법의 발파 성능이 효율적임을 확인하였다.

계단식 발파에 있어서 자유면 전.후방의 지반진동에 관한 연구 (A Study on the Ground Vibration of the Front and the Back Direction of the Free Face in the Bench Blasting)

  • 기경철;김일중
    • 화약ㆍ발파
    • /
    • 제20권2호
    • /
    • pp.21-31
    • /
    • 2002
  • We did bench blasting upon the natural rock which it's uniaxial compressive strength was about $1,420~1,476kgf/\textrm{cm}^2$. This is the results we inferred after measuring, analyzing the ground vibration velocity of the front and back direction from the free face of the bench blasting. We have to induce the square and cube root scaled equation and the general equation to guarantee confidence upon the data when analyzing the measurement data of the test blasting. The variable distance is in reverse proportion to the permitted ground vibration velocity. The shorter is the exploding point to a protection structure, the bigger is the reflection that the direction of the free face experts the ground vibration velocity, The ground vibration velocity front of the free face tends become reduced about 38~46% compare with back of the free face in the range that the permitted ground vibration velocity is 2.0~5.0mm/sec. In case of 2.0mm/sec, when a protection structure is within about 95m, the max. allowable charge weight per delay on positing front of the free face can be more used about 2.61 times than that on positing back of the free face, in case of 3.0mm/sec within about 78m more about 2.38 times, in case of 5.0mm/sec within 60m more about 2.10 times. In case of 2.0~5.0mm/sec when a protection structure is within about 200m front from the free face, the max. allowable charge weight per delay can become about 1.52 times than the case on back to the free face.

발파 현장에서 기폭 패턴 변화에 따른 진동 특성 분석 (Analysis of Vibration Characteristics Caused by the Change of Detonation Pattern in the Blasting Site)

  • 송정언
    • 화약ㆍ발파
    • /
    • 제42권1호
    • /
    • pp.12-22
    • /
    • 2024
  • 본 연구에서는 발파 현장에서 발파 구역을 구분하여 분할 발파를 실시할 때 구역 내 열간 기폭 패턴에 따른 진동 특성을 확인하기 위해 계측된 진동데이터를 통해 방향별 진동파형 및 진동속도, 주주파수를 비교 분석하였다. 결과적으로, 발파 구역 내 열간 기폭 패턴에 따라 방향별 진동파형의 변화를 나타냈으며, 진동속도 및 주주 파수대역 또한 다른 양상을 보이는 것으로 확인되었다.

발파에 의한 터널 굴착시 RMR값에 따른 인접구조물의 동적 영향 (Dynamic Influence of Tunnel Blasting on Adjacent Structures for Various RMR Values)

  • 허재록;황의석;이봉열;김학문
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.657-664
    • /
    • 2002
  • This study presents the influence of blasting-induced vibration on the adjacent structures in rocks of various RMR values. 3D finite element analysis was performed to simulate the behaviour of tunnel and adjacent structures during rock excavation. The blast loadings were evaluated from the blasting pressure which is depending on the type and amount of explosive charges. Influencing factors for the stability of adjacent structures and ground conditions were reviewed in terms of structural dimensions and RMR values. The stiffness and load of adjacent structures are modeled in the numerical analysis to Investigate blasting effects of the size of adjacent structures. The vibration velocity and maximum particle velocity was increase sharply when the RMR value changed from 30 to 50. The effect of particle velocity was minimized at the width of structure become 2 times of tunnel diameter.

  • PDF

The effect of blast-induced vibration on the stability of underground water-sealed gas storage caverns

  • Zhou, Yuchun;Wu, Li;Li, Jialong;Yuan, Qing
    • Geosystem Engineering
    • /
    • 제21권6호
    • /
    • pp.326-334
    • /
    • 2018
  • Underground water-sealed gas storage caverns have become the primary method for strategic storage of LPG. Previous studies of excavation blasting effects on large-scale underground water-sealed gas storage caverns are rare at home and abroad. In this paper, the blasting excavation for underground water-sealed propane storage caverns in Yantai was introduced and field tests of blasting vibration were carried out. Field test data showed that the horizontal radial velocity had a major controlling effect in the blasting vibration and frequencies would not cause the vibration velocity concentration effects. In terms of the influence of blasting vibration on adjacent caverns, the dynamic finite element model in LS-DYNA soft was established, whose reliability was verified by field test data. The numerical results indicated the near-blasting side was primary zone for the structural failure and tensile failure tended to occur in the middle of the curved wall on the near-blasting side. Meanwhile, the safety criterions for adjacent caverns based on stress wave theory and according to statistic relationship between peak effective tensile stress and peak particle velocities were obtained, respectively. Finally, with Safety Regulations for Blasting in China (GB6722-2014) taken into account, a final safety criterion was proposed.

시공단계의 진동레벨 단위적용에 관한 사례 연구 (A Case Study on the Application of Vibration Level Units in the Construction Phase)

  • 최형빈;김동연
    • 화약ㆍ발파
    • /
    • 제30권2호
    • /
    • pp.86-97
    • /
    • 2012
  • 건설현장의 노천발파로 발생되는 지반진동은 인체의 간접피해 및 구조물의 물적 피해를 동반하며, 인체는 진동레벨, 구조물은 진동속도 단위로 평가한다. 본 연구는 실시단계 진동기준 중 진동속도 외 누락된 진동레벨 단위를 추가, 진동속도 및 진동레벨을 동시 측정한 적용사례로서 추후 민원이 예상되는 현장관리에 도움이 될 것으로 여겨진다. 발파진동 및 진동레벨 추정식 도출을 위한 표본수는 총 232개가 사용되었으며, 진동속도 0.3 cm/s와 진동레벨 75 dB(V) 기준의 지발당장약량을 비교한 결과, 후자가 20.0~40.9% 여유가 있음을 입증하여 진동레벨 단위척도 추가는 전혀 문제되지 않음을 언급하였다. 소음 진동 관리법이 우선된다면 노천발파 시공비용은 훨씬 저감될 것으로 생각된다. 본 연구에서 사용된 계측기기는 국내에서 처음으로 진동속도 및 진동레벨을 동시 측정할 수 있는 특성을 지닌 SV-1모델을 사용하였다.

바닥발파에서 암질지수(RQD)와 발파진동상수 K, n의 관계 (Relationship between Rock Quality Designation and Blasting Vibration Constant "K" & Decay Constant "n" by Bottom Blasting Pattern)

  • 천병식;오민열
    • 한국지반공학회지:지반
    • /
    • 제11권3호
    • /
    • pp.55-68
    • /
    • 1995
  • 본 연구는 수직구의 바닥굴착을 위한 바닥발파시 삼승근환산식과 자승근환산식의 발파진동상수 및 감쇠지수와 암질지수(RQD)와의 관계를 시험발파계측을 통하여 정리분석한 것이다. 각종 발파시 발파진동의 크기는 장약량, 발파원과 발파진동 측정지점과의 거리, 지반의 특성에 따라 크게 좌우되며 본 논문에서는 지반의 특성이 발파진동에 미치는 영향을 규명하기 위하여 암반의 절리특성을 대표하는 RQD와 발파진동 크기와의 관계를 연구한 것이다. 시험결과 RQD의 증가에 따라 발파진동상수 K와 감치지수 n의 절대치는 상대적으로 증가하는 것으로 나타났으며 본 연구결과에 의하여 향후 암질지수에 따른 바닥발파의 발파진동속도를 예측할 수 있다.

  • PDF

시험발파 계측자료 분석을 통한 암석 발파진동 특성 분석 (Analysis on the Characteristics of Rock Blasting-induced Vibration Based on the Analysis of Test Blasting Measurement Data)

  • 손무락;유재하;안성수;황영철;박두희;문두형
    • 한국지반환경공학회 논문집
    • /
    • 제16권9호
    • /
    • pp.23-32
    • /
    • 2015
  • 본 논문에서는 암석발파 유발 진동에 대한 포괄적인 추세특성을 파악하기 위하여 국내 97개의 현장에서 계측된 시험발파진동에 관한 자료를 이용하여 굴착종류(터널, 벤치굴착) 및 암석종류별로 발파진동의 특성을 조사 및 검토하였다. 계측된 자료는 주로 강원도 및 경상도 지역의 시험발파 현장으로부터 획득하였으며, 계측현장 자료의 암석종류는 화강암이 제일 많았으며 그다음으로 편마암, 석회암, 사암, 셰일 순으로 나타났다. 본 연구를 통한 분석 결과, 발파진동 속도는 굴착종류(터널, 벤치)에 따라 영향을 받는 것으로 나타났으며, 터널발파에 비하여 벤치발파에 의한 진동속도가 더 크게 발생하는 것으로 나타났다. 또한 발파진동은 암석종류에 따라 크게 영향을 받는 것으로 나타나 향후 암석종류를 포함한 발파진동 추정식 관리가 필요할 것으로 나타났다. 이와 더불어 본 연구를 통해 얻어진 결과와 기존의 국내 발파진동 추정식에 의한 결과들과 상호 비교하였으며, 비교결과 터널발파에서 자승근식을 이용한 결과를 제외하곤 큰 차이가 나타나 향후 암반에서의 발파진동 추정과 관련하여 암석의 강도 및 절리특성, 지층분포, 굴착종류, 사용화약, 계측장비 및 방법 등의 영향을 종합적으로 반영한 더욱더 많은 연구 및 관심이 필요할 것으로 판단된다.

지표발파의 진동특성에 관한 기초연구 (On the Vibration Characteristics of Surface Blasting)

  • 양형식
    • 터널과지하공간
    • /
    • 제2권2호
    • /
    • pp.199-211
    • /
    • 1992
  • Blasting vibrations of 3 quarries and 5 construction sites were measured and investigated with two reference data. Square and cubic root scaled distance were similar in fitness to peak particle velocity of individual blasting site, but the former is better fitted in total. It was suggested that the limit scaled distance for domestic surface blasting be 40kg/$\textrm{cm}^2$ for 10mm/s level and 60kg/$\textrm{cm}^2$ for 5mm/s level, which were lower than the OSM's regulation. Prevailing vibration components were in the order of radial, vertical and transverse directions. Prevailing vibration components were in the order of radial, vertical and transverse directons. Site factors K and m were 242 and -1.283 for all studied area, 357 and -1.348 for construction sites, 118 and -1.160 for quarries. Most prevailing frequency was in the range of 10~2Hz. Overlapping effect of delayed blasting vibrations were insignificant. Vibration history of delayed blasting was longer than simultaneous blasting, and it became longer as measuring distance increased. Wave form and predominant frequencies were more complicated for delayed blasting than instantaneous blasting. The influence of blasting scale and measuring distance were not significant to determine peak particle velocity equation.

  • PDF

지하채굴공동에서 굴착방법에 따른 발파진동의 특성에 관한 연구 (A Study on the Characteristics of Blasting Vibration from Different Excavation Methods in Underground Mine)

  • 강추원;류복현
    • 화약ㆍ발파
    • /
    • 제24권1호
    • /
    • pp.1-8
    • /
    • 2006
  • 최근 대부분의 석회석 광산은 환경문제 등으로 인하여 노천채광에서 지하채굴로 전환되었다. 그 결과 노천채광과 같은 생산성을 유지하기 위해 갱도가 대형화되고 있다. 이에 따라 갱도 및 광주의 규모 그리고 굴착방법 등에서 많은 문제가 발생하고 있다. 본 연구는 두 갱도의 동시 발파 혹은 단일갱도 내에서 좌운반갱도와 사갱을 동시 발파, 두 갱도를 다단 발파 그리고 각각의 갱도를 단독 발파하여 굴착했을 때의 발파진동을 계측하여 각각의 굴착방법에 따라 발파진동식을 산출하여 노모그램 분석과 암반손상권 분석을 실시하였다.