• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1173-1179
• /
• 1999

A study was made on crack developments of the nearly building due to rock blasting for road construction at the 623 Common Block near the rear side of the Gamchun Habor. The gelogy of the study area is composed of andesite, which belongs to the Kyungsang System of the Cretaceous Period. For 3 months of blasting events, the vibration velocity data were measured at the site just in front of the K freezing factory. The data were divided into 4 groups according to the period of blasting(i.e, DATA 1, DATA 2, DATA 3 and DATA 4), for deriving K and n values. As a result, DATA 1 shows that K and n were 83.3756 and -0.848, respectively, and then K and n were progressively increased in absolute values for the follow-up groups and the last DATA 4 shows K and n were 2980.4898 and -1.502, respectively. Such differences in K and n values may be due to partly : 1) variations geological characteristics, from the upper rather weathered, fisssuring soft rocks at the earlier stage less weathered and fissuring hard rocks at the later stage of blasting events, and 2) the geometry between the blasting and detecting points.Among the total count of 225 blasting events, the number exceeding the safety limits of 0.5cm/sec was 20(8.9% of the total), the maximum displacement detected at the crack gage was 0.25mm, the level of which is far less to cause the occurrence and development of any cracks to the K factory. Therefore, it was confirmed that there were no damages such as structural failure or safety problem to the building.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.4
• /
• pp.287-300
• /
• 2002

Composition Presplitting Angle Cut (COPA-Cut) is a newly developed blasting method for tunnel excavation. Contrary to existing methods, COPA-Cut first creates presplitting by tension crack in cut. In this study, field tests measuring the advance efficiency, noise and ground vibration were performed in order to verify the presplitting effect. To compare the economy and workability, tests were simultaneously performed by COPA-Cut and existing method on the same condition. Results show that COPA-Cut increased advance efficiency and decreased noise and ground vibration. Also, it was confirmed that COPA-Cut is superior to existing method in terms of economy, workability and quality control.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.553-558
• /
• 2002

The blast vibration can generate occupants dissatisfy as well as damage of physics nearby building. Then blast vibration estimation issue important problems. But, now blast vibration prediction inside-outside country not established objective method to express magnitude of vibration according to blast number. In this study, Our propose show our country problem of blast vibration about blast vibration measurement and this problems be able to find improve method.

• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.85-95
• /
• 2004

A damage criterion by blast vibration & noise has to be established through a engineering view point. Though a blast vibration has effects on human and structure, they have experienced a different damage. Thus, a damage criterion for structure needs to get a peculiar criterion which are different from one for human. At present, blast damage criterions authorized by government are Vibration & Noise Act made by Ministry of Environment and blast damage criterion of specifications for tunnel made by Ministry of Construction & Transportation. Vibration & Noise Act is based on the response of human, and while it has some application problems, it turns out to be partly rational. But, blast damage criterion of specifications for tunnel has unreasonable guidelines. In this article, its problems are reviewed and a alternative blast damage criterion is suggested.

• Journal of Environmental Impact Assessment
• /
• v.18 no.1
• /
• pp.21-30
• /
• 2009

The study show that things about the noise control are indicated at The Noise & Vibration Control Act and the other Act. Also, the details program and total government ministries' program for the noise control are indicated what are the advance noise control plan. The study consist of the four part which are "Draw up the environmental noise infrastructure plan; the install shall be done the noisemap & the automatic noise measurement devices", "Resetting of environmental noise standard at the application area and Introduce of indoor noise; the guide for region classification of the noise standard & indoor noise", "Setting of aircraft noise standard and Program of measurement point operation; the noise-assessment-standard shall change from WECPN to new index($L_{den}$, $L_{dn}$, $L_{Aeq\;24h}$) & the operation and control of aircraft noise measurement changes from local environmental office to central control center" and "The method of noise regulation at construction site and the plan on making of standard for vibration regulation; It shall be made that the guideline of construction noise should include a target-construction, noise standard etc & the ministries shall unify control about construction vibration of the blasting vibration". The advance noise-policy will improve efficiency to deal with civil appeal & damage on residents about noise.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.285-303
• /
• 2023

Interest in building underground spaces is increasing for the creation of downtown infrastructure and efficient space utilization. A representative method of utilizing underground space is a tunnel, and in addition to road tunnels, the construction of utility tunnels such as power conduits and utility conduits is gradually increasing. The current basic tunnel construction method can be divided into NATM (New Austrian Tunnelling Method) and TBM (Tunnel Boring Machine). The NATM is a reliable method, but it is accompanied by vibration and noise due to blasting. In the case of the TBM excavation method, there are disadvantages in terms of construction period and construction cost, but it is possible to improve economic feasibility by introducing appropriate complementary methods. In this study, a blasting method was develop using the NATM after TBM pre-excavation using the protective shield method. This is a method that compensates for the disadvantages of each tunnel construction method, and is expected to reduce construction costs, blasting vibration, and noise. In order to review the performance of the developed method, an experiment was conducted to evaluate the performance of explosion-proof tube to which a protective shield scale model was applied, and the impact of blasting vibration of the protective shield method was analyzed.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1592-1595
• /
• 1998

The rock fragmentation system with a capacitor bank, switching device, cable and blasting electrode are described. Utilization of the chemical energy from the electrolyte and the pseudospark with a large current capacity suggested the commercialization possibility of the rock fragmentation system. The vibration and noise level of the pulsed blasting is acceptable in the most ground breaking. And also the electromagnetic force produced by the inductor is introduced for the rock fragmentation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.125-128
• /
• 1990

조사후 시험시설(Post Irradiated Examination Facility, PIEF)은 내진범주 1 급 구조물로서 현재 각종 실험 및 연구가 진행중인 원자력 안전관련시설물 이다. 한편 이 건물로부터 30m - 120m 정도 떨어져 있는 다목적연구로 (Korea Multipurpose Research Reactor, KMRR) 및 조사재시험시설 (Irradiation Material Examination Facility, IMEF)의 건조사업을 위하여 기 초암반의 굴착작업을 수행할 경우 발파작업에 따른 그 진동 및 폭풍압영향 이 염려되어, 그 안전성 평가를 위하여 시험발파를 수행해야 할 필요가 제기 되었다. 우선 운전중인 원자력안전 시설물에서의 발파에 따른 진동허용 기준 을 설정하고, 둘째로 거리에 따른 폭발량을 경험식에 따라 잠정 결정한 후, 세째로 시험발파에 의한 진동 측정을 수행하여 그 영향을 평가하고, 끝으로 이에 따라 거리별 제한 폭발량을 결정한후 실제 본발파에 적용하고자 한다. 이로써 운전중인 원자력 안전관련시설물인 PIEF의 안전 운전을 도모하고 KMRR및 IMEF 시설의 건조를 원만하게 이룰 수 있을 것이다.

• Explosives and Blasting
• /
• v.33 no.2
• /
• pp.25-39
• /
• 2015

The common underwater rock removal methods involve underwater blasting and crane's chisel dropping impact method. From an environmental point of view, these methods cause ground vibrations and underwater noise. At the site for this study, a method of dropping heavyweight chisel is selected to remove the underwater bedrock near the ferry rack in the course of improving the cargo handling ability of the loading dock. A prediction formula for the vibration was obtained based on the measurement and evaluation of the vibrations caused by the chisel dropping impacts during the test droppings. The prediction formula was successfully applied to the main construction for securing the stability of the structure.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.2
• /
• pp.123-133
• /
• 1998

As the results of investigation, the noise level was between 60 dB and 80 dB in the area of explosion. The residents living within 1 Km would feel uncomfortable. However, hearing loss is not happened by this range. The maximum range that the human can hear is 20,000 Hz and the maximum range that the dog can hear is between 20 Hz and 40,000 Hz. The auditory range for humans to be uncomfortable toward noise is between 1,000 Hz and 2,000 Hz. As the result of this experiment, the auditory range of dog is more wide than of a human. The change of hair cells in the Corti's organ occurred when the dog was exposed to 1,000 Hz at 100 dB for 1 month. Therefore, the structure change of the ear could happen by hearing loss because of noise, but the structure change of hair cells is the worst symptom by hearing loss because of noise.