• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.116-117
• /
• 2018

The aim of this study is to investigate the properties of hardened mortar with chlorine by-pass system(CBS) in cement production in blast furnace slag(BS) mixed cement. Compressive strength had a tendency to be increased when the CBS Dust was replaced by 10% at the BS replacement rate of 0%. The 65% combination of BS showed a tendency to decrease as the CBS Dust exchange rate increases. Flexural strength was reduced as CBS Dust exchange rate increases in BS replacement ratio of 0%. The use of 5% of CBS dust can contribute to enhance the quality of non reinforced concrete.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.8-14
• /
• 2014

Pulverized coal (PC) has become an important auxiliary fuel in the iron and steel industry since the technique of pulverized coal injection (PCI) was developed for iron making. The combustion efficiencies of pulverized coal in blowpipes and tuyeres under various operational conditions are numerically predicted to determine the performance levels with regard to different locations of the nozzles in a blast furnace. A variety of parameters, including the pulverized coal quantities, oxygen amounts, inlet temperatures of the tuyeres, and the mass flow rate of coal carrier gas are taken into consideration. Also, in order to develop greater efficiency than those of existing coal injection systems, this study applies a flame measurement system using a charge-coupled device (CCD) camera and a frame grabber. It uses auto sampling algorithms from the flame shape information to determine the device for the optimal location control for PCI. This study finds further improvements of the blast furnace performance via the control of the PCI locations.

• 전자공학회논문지 IE
• /
• 제46권4호
• /
• pp.25-30
• /
• 2009

용광로는 외피 부분에 내부 내화물의 온도를 낮추기 위하여 냉각수를 공급하는 냉각판 또는 스테이브를 사용하고 있다. 주변 조업 조건의 열악으로 냉각수를 공급하는 배관의 부식으로 냉각수가 내화물에 침투하여 내화물의 수명을 떨어뜨리고, 노황을 악화시키는 원인이 되고 있다. 이에 본 연구는 용광로 냉각설비장치에 이상 현상이 발생하였을 때 위치를 정확히 확인함에 따라 신속하게 누수된 부위를 파악하여 대처할 수 있는 기능을 갖춘 냉각관 누수 자동감지장치를 개발하였다. 주된 연구는 전자제어 장치인 마이크로프로세서를 응용한 전자변 제어장치를 이용하여 냉각설비의 파손으로 발생되는 누수현상으로 인한 고열과 분진 일산화탄소 등의 산출로 작업환경의 재해를 자동방지 하고자 하였으며, 작업환경이 친환경적이며 작업의 가치를 재창출할 수 있는 방법들이 연구되고 있다. 용광로 분위기의 일산화탄소 자동 감지장치와 그에 따른 출력신호를 자동 전송하는 무선중계기 장치를 개발함으로 용광로 냉각설비 장치의 분위기 작업환경을 수동방식에서 무인자동화방식으로 개선하였다.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.31-37
• /
• 2009

본 연구에서는 고로슬래그 미분말과 플라이애쉬 혼입률에 따른 3성분계 콘크리트의 역학적 특성과 내구성을 평가하였다. 이를 위해 플라이애쉬 혼입률 변화(0%, 10%)와 고로슬래그 혼입률 변화(0%, 10%, 20%, 30%)를 실험변수로 하였으며, OPC와 TBC의 특성분석을 위하여 압축강도, 휨강도 그리고 내약품성 시험을 실시하였다. 실험결과, 압축강도와 휨강도에서 플라이애쉬 및 고로슬래그 미분말 혼입이 장기재령에서 강도 증진효과를 나타내는 것으로 평가되었다. 특히 플라이애쉬 10%와 고로슬래그 30%의 3성분계 콘크리트 사용은 매우 타당한 것으로 나타났다. TBC의 특수저항성은 재령 90일에서 매우 낮은 등급으로 나타났다. 또한 OPC에 혼입되는 플라이애쉬 및 고로슬래그 미분말은 투수저항성 및 화학저항성의 향상을 가져오는 것으로 나타났다.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.149-156
• /
• 2020

Blast furnace revamping in steel industry is one of the most important work to complete the complicated equipment within a short period of time based on the interfaces of various types of work. P company has planned to build a Smart Tracking System based on the wireless tag system with the aim of complying with the construction period and reducing costs, ahead of the revamping of blast furnace scheduled for construction in February next year. It combines the detailed design data with the wireless recognition technology to grasp the stage status of design, storage and installation. Then, it graphically displays the location information of each member in relation to the plan and the actual status in connection with Building Information Modeling (BIM) 4D Simulation. QR Code is used as a wireless tag in order to check the receiving status of core equipment considering the characteristics of each item. Then, DB in server system is built, status information is input. By implementing BIM 4D Simulation data using DELMIA, the information on location and status is provided. As a feature of the S/W function, a function for confirming the items will be added to the cellular phone screen in order to improve the accuracy of tagging of the items. Accuracy also increases by simultaneous processing of storage and location tagging. The most significant effect of building this system is to minimize errors in construction by preventing erroneous operation of members. This system will be very useful for overall project management because the information about the position and progress of each critical item can be visualized in real time. It could be eventually lead to cost reduction of project management.

• 한국환경보건학회지
• /
• 제35권5호
• /
• pp.411-416
• /
• 2009

This study was initiated to improve the cooling water quality by chemical coagulation and sedimentation in steel mills. Due to the inefficient flocculation in the settling tanks of blast furnace cooling water systems, the solid particles in the cooling water overflow accumulate and clog the cooling system. To protect the cooling water system from such fouling, proper flocculants must be continuously used. Laboratory tests were performed for the indirect cooling water system of a plate mill. The batch test in the gas scrubbing cooling water system of a blast furnace showed that the proposed coagulant was more effective for the improvement of coagulation and sedimentation than the existing one. During the tests, cationic flocculants were more effective than use of only an anionic flocculant. The suggested combination of anionic and cationic flocculants can probably improve the turbidity removal efficiency of the cooling water. Proper control of the overflow rate by the designed residence time would help turbidity removal efficiency in the settling tank. In addition, the settling can be enhanced by adopting rapid and slow mixing alternatively. Scale problems in blast furnace cooling water system were reduced to some extent by efficient settling.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1085-1097
• /
• 1999

A separate heat pipe system capacity of 3,700kW has been developed and applied to preheating the blast furnace gas for recovery of the waste heat from boiler. The system is designed to preheat the blast furnace gas up to $126^{\circ}C$ by using tho boiler exhaust gas of which temperature is $180^{\circ}C{\sim}220^{\circ}C$. The arrangement of the fin tubes as well as the shape of the fin has been carefully determined to minimize the fouling problems. The heat pipe system was found to be stable in circulation of the working fluid and the range of the temperature variation of the preheated blast furnace gas was within $10^{\circ}C$. It was proved through a long-term test that the selected tube arrangement and the shape of the fins are proper to prevent the fouling problems and that the pay-back period of the system Is within one year.

• 한국환경복원기술학회지
• /
• 제7권2호
• /
• pp.68-74
• /
• 2004

A blast furnace slag(BFS) has been used as a filter medium for the treatment of domestic waste waters during the period of 9-month. More than 90% of phosphorus was removed while the hardness of the treated water increased by 5 times and the pH was significantly raised from 6.8 to 10.8. The high hardness and pH of the treated water indicated dissolution of BSF by the sewage. The experimental results suggest that BFS could be utilized for the removal of phosphorus in the waste water treatment plant using aquatic plants and gravels.

• 자원리싸이클링
• /
• 제15권4호
• /
• pp.27-35
• /
• 2006

본 연구에서는 명반석 $[K_{2}SO_{4}{\cdot}Al_{2}(SO_{4})_{3}{\cdot}4Al(OH)_{3}]$을 고로수쇄슬래그의 활성화제로서 활용하기 위하여 하소 명반석과 고로수쇄슬래그의 수화반응 특성을 연구하였다. $650{\circ}C$에서 하소시킨 명반석은 $KAl(SO_{4})_{2}$와 $Al_{2}O_{3}$로 구성되어 있으며 하소 명반석-소석회-석고 계에서 하소 명반석은 소석회 및 석고와 $2KAl(SO_{4})_{2}+2Al_{2}O_{3}+13Ca(OH)_{2}+5CaSO_{4}{\cdot}2H_{2}O+73H_{2}O{\rightarrow}3(3CaO{\cdot}Al_{2}O_{3}{\cdot}3CaSO_{4}{\cdot}32H_{2}O)+2KOH$와 같이 반응하여 ettringite($3CaO{\cdot}Al_{2}O_{3}{\cdot}3CaSO_{4}{\cdot}32H_{2}O)$를 형성한다. 하소 명반석-고로수쇄슬래그 계에서는 하소 명반석에서 용해된 황산이온($SO_{4}^{2-}$)이 소석회와 반응하여 석고를 형성시키고, 석고는 다시 고로수쇄슬래그와 반응하여 ettringite를 형성시키면서 슬래그의 수화반응을 촉진시키기 때문에 하소 명반석을 고로수쇄슬래그의 활성화제로 사용할 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.38-39
• /
• 2019

Mechanical properties of concrete containing furnace slag according to the CBS Dust Replacement Ratio were analyzed. The experimental study found that the compressive strength was excellent in the early age when the CBS Dust was replaced, and the drying shrinkage was excellent, and the replacement of CBS Dust 5% on the concrete containing the furnace slag would have a positive effect.