• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.137-138
• /
• 2013

Nowadays, research about using recycled aggregate as alkali activator has been investigated. By the mechanism of Alkali activation, blast furnace slag's potential hydraulis property would be activated. Thee application of this technique is considered as fit for low strength concrete, so it's suitable in concrete secondary production such as bricks and blocks. Aside alkali activator, sulfate could also activate blast furnace slag's potential hydranlis property. In this research, gypsum(CaSO4·2H2O)has been added with blast furnace slag. Fundamental experiment such as flow and strength has been tested to evalnate effect of gypsum's activation property.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.207-208
• /
• 2019

In this study, compressive strength was measured to evaluate the initial strength of cement mortar substituted with coal gasification slag containing desulfurized gypsum, and the reactivity of desulfurized gypsum was confirmed. In order to improve the reactivity, 2% gypsum mixed type and gypsum unfedged type specimens were fabricated and the influence of desulfurization gypsum on compressive strength of coal gasification slag and blast furnace slag fine powder replacement cement mortar was compared and confirmed. As a result of the experiment, it was confirmed that the initial compressive strength of the specimen containing the desulfurized gypsum was improved at the initial stage.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.9-14
• /
• 2022

기존의 페로니켈 슬래그에 관한 연구는 대부분 골재 및 잔골재로서의 가능성에 초점이 맞추어져 수행되었으나 본 연구는 페로니켈 슬래그 미분말의 콘크리트 혼화재로서의 가능성에 주목하여 수행하였다. Fly ash, 고로슬래그 및 FPS 등을 각각 10 %씩 혼입한 콘크리트에 대해 미국의 ASTM C 1260을 준용하여 반응성을 평가하였다. 그 결과, 대조군과 비교해 Fly ash는 8.43 %, 고로슬래그 미분말은 14.46 % 팽창률이 감소했지만, 페로니켈 슬래그 미분말은 49.40 %의 팽창률 감소세를 보였다. 골재의 반응성 억제 측면에서 충분히 Fly ash, 고로슬래그 등 기존의 혼화재를 대체할 수 있음을 확인하였으나, SEM 분석결과 수많은 에트린자이트(ettringite)가 생성되었고 이것이 콘크리트에 어떤 영향을 주는지에 대한 추가적인 연구가 필요하다.

• 한국농공학회논문집
• /
• 제46권7호
• /
• pp.47-53
• /
• 2004

Permeable polymer concrete can be applied to roads, sidewalks, river embankments, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study was to explore a possibility of using blast furnace slag powder and stone dust of industrial by-products as fillers for Eco-permeable polymer concrete. Different mix proportions were tried to find an optimum mix proportion of the Eco­permeable polymer concrete. The tests were carried out at $20{\pm}1^{circ}C$ and $60{\pm}2\%$ relative humidity. At 7 days of curing, unit weight, coefficient of permeability, dynamic modulus of elasticity, compressive, flexural and splitting tensile strengths ranged between $1,821{\~}1,955 kg/m^{3}$, $0.056{\~}0.081\;cm/s$, $114{\times}0^{2}{\~}157{\times}10^{2}\;MPa,\;17.6{\~}24.7\;MPa,\;5.98{\~}7.94\;MPa\;and\;3.43{\~}4.70\;MPa$, respectively. It was concluded that the blast furnace slag powder and stone dust can be used in the Eco-permeable polymer concrete.

• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.63-70
• /
• 2017

When industrial by-products like slag and fly ash are using in concrete with cement, it improves strength and durability against external deterioration factors by densifying the structure through potential hydraulic and pozzolanic reaction. But it has been pointed out that high dependence on the quality variation and the curing condition using a admixure material for concrete. In this study, the characteristics of internal micropore structure according to curing condition were analyzed for pastes and mortar specimens under using blast furnace slag powder. As a result, the variation of compressive strength and the internal microstructure were observed according to curing conditions by binder type. Particularly, using blast furnace slag powder, decrease in compressive strength were clearly observed in indoor and carbonation curing compared with water curing. The pore structure analysis also clearly observed the decrease of the gel pore existing in the CSH hydrate layer and the increase of the capillary pore in indoor and carbonation curing compared with water curing condition.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.272-277
• /
• 2000

This study is performed to evaluate the engineering properties of permeable polymer concrete with blast furnace slag and fly ash. The following conclusions are drawn; 1. The highest strength is achieved by 50% filled blast furnace slag powder and fly ash permeable polymer concrete, it is increased 36% by compressive strength, 119% by tensile strength and 217% by bending strength than that of the normal cement concrete, respectively. 2. The ultrasonic pulse velocity is in the range of 2,022 ∼ 2,139m/s. The highest pulse velocity is showed by 50% filled blast furnace slag powder and fly ash permeable polymer concrete. 3. The water permeability is in the range of 4.612∼5.913$\ell$/$\textrm{cm}^2$/h, and it is largely dependent upon the mix design.

• 한국건축시공학회지
• /
• 제17권6호
• /
• pp.527-534
• /
• 2017

본 연구에서는 순환골재 생산시 발생되는 미분말을 고로슬래그 미분말의 알칼리 자극제로 활용하기 위해 배합수에 일부 혼입하여 강알칼리성을 띄게 한 후, 고로슬래그 미분말을 단계별로 치환한 콘크리트의 물리적 특성에 미치는 영향을 종합적으로 분석하였다. 그 결과 순환골재 미분말의 침지시간이 5시간일 때 전 시험편에서 가장 높은 pH가 측정되어 알칼리 자극제로서 활용가능성이 가장 높은 침지 시간임을 확인할 수 있었으며, 순환골재 미분말을 3% 혼입시킨 시험배합수가 1% 혼입시킨 배합수에 비하여 약 15mg/l이상의 $Ca(OH)_2$을 더 함유한 것으로 나타내었다. 순환골재 미분말을 혼입시킨 배합수를 사용한 경우 일반배합수를 사용한 경우와 비교하여 전 재령에서 강도발현이 더 우수한 것으로 나타났으며, 조기재령과 장기재령 모두 순환골재 미분말의 알칼리 자극효과가 있음을 확인할 수 있었다.

• 한국건축시공학회지
• /
• 제15권3호
• /
• pp.257-263
• /
• 2015

본 연구에서는 우리나라에서 생산되는 고로슬래그 미분말(BS)의 품질특성과 BS의 치환율 변화가 순환골재 사용 시멘트 모르타르의 공학적 특성에 미치는 영향 및 BS 품질 특성치와 모르타르의 공학적 특성치간의 상관성을 분석하고자 하였다. 분석결과 먼저 BS 품질특성은 9개 항목 중 4개 항목에서 불만족하는 공장이 존재하였는데, 이중에서도 분말도의 개선이 제일 중요하게 요구되었다. 또한, BS의 치환율이 증가할수록 순환골재사용 시멘트모르타르의 유동성은 증가하였으나 응결지연, 초기강도가 저하하는 문제는 존재하였으나, 단 잠재수경성반응으로 후기재령에서는 증가하였다. BS의 품질특성치와 시멘트 모르타르의 공학적 특성치간의 관계에서 이수석고와 관련하는 $SO_3$ 및 L.O.I는 응결시간, 3 및 91일 압축강도와 미약하지만 어느 정도 상관성이 있는 것으로 분석되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.217-218
• /
• 2011

The advantages of blast-furnace slag concrete may include lower hydration heating velocity, restraint on concrete temperature increase, long-age strength improvement due to latent hydraulic reaction, improved water tightness, and repulsion to chemical erosion. These advantages contribute to the high quality of the blast-furnace slag concrete. However, the blast-furnace slag concrete has its limitations as well. These disadvantages may include retarded setting and elongated retention of mold due to the weak strength of early-age. Nevertheless, much research is currently under way to improve the aforementioned issues. To improve activity of blast furnace slag powder, alkaline irritants has been used. In this study, we analyze effect on activity fineness and rate of substitution of Alkali Activator toward activity.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.128-134
• /
• 2005

This study was performed to evaluate the strength and durability properties of recycled concrete containing water - redispersible copolymer powder(WRP) and blast furnace slag powder(BSP) [RCWS]. Material used were cemente, recycled coarse aggregare, natural fine aggregate, water-redispersible copolymer powder, blast-furnace slag powder. Especially, Water-redispersible powder was used for blending with Inorganic binders such as cemente, gypsum and hydrated lime etc. First of all, Mixed ratio method of RCWS made Two Type. One was called type-1 which used to BSP content 5% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. Another was called Type-2 which used to BSP(blast furnace slag powder)content 10% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. According to the experimental results of (RCWS), Incase Type-2 at curing age 28days, Compressive strength, pulse velocity and dynamic modulous of elasticity were shown higher than Type-1 and The more WRP content increasing($0%{\sim}6%$) was the lower Compressive strength, Pulse velocity and Dynamic modulous of elasticity. Water absorption ratio was in the range of $3.85%\;{\sim}\;3.23%$, it was almost equal to Type-1, 2 but Increasing the WRP content($0%{\sim}6%$), The water absorption ratio is decreased.