• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.124.1-124.1
• /
• 2015

$TiO_2$는 화학적으로 안정하며, 인체에 무해하고, 살균특성 및 각종 유기물에 효과적인 분해력, 안정성 및 내구성들의 장점으로 인해 널리 사용되는 광촉매제로 알려져 있다. 최근 $TiO_2$는 유리에 접촉되는 물방울의 표면장력을 크게 하여 접촉각을 10도 이하로 유지시켜줌으로써 비가 오거나 청소를 위해 살수를 할 때 유리면에 얇은 수막을 형성시켜 광촉매 기능으로 분해된 유기질의 오염물질 및 유리표면과의 결합력이 낮아진 무기질의 오염원을 쉽게 제거해 주는 특성들로 인해 오염방지 코팅제로 많이 활용되고 있다. 그러나, $TiO_2$는 빛이 조사될 경우에만 친수특성을 나타낸다는 단점들이 있어 본 연구에서는 $TiO_2$에 $SnO_2$를 혼합한 박막을 증착하여 신뢰성을 향상시키고자 하였다. 또한 기존 $TiO_2$ 코팅막들이 주로 spray 또는 blade 방식으로 코팅되어 코팅된 막이 낮은 균일성과 내구성을 가지므로 본 연구에서는 RF-Magnetron Sputtering 방법을 이용하여 유리 기판위에 $(TiO_2)50(SnO_2)50$ 박막을 증착하였다. 제작된 박막은 유리에 적용될 경우를 감안해 광학적 특성을 분석하기 위해 Uv-vis Spectrometer 장비를 이용하여 투과율을 분석하였으며, $SnO_2$ 혼합에 따른 구조적 특성으로 주사전자현미경(Scanning Electric Microscope, SEM)을 통하여 박막의 결정상을 분석하였으며, 주사탐침현미경(Atomic Force Microscope, AFM)을 사용하여 표면 거칠기를 관찰하였다. 또한 광촉매 특성을 통한 친수성을 알아보기 위해 UV 램프를 사용한 후 접촉각을 측정하였다.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1255-1255
• /
• 2001

The study used 356 veal calf meat samples received from Finland (n=16), France (n=109), Italy (n=81) and The Netherlands (n=150). Calves were raised under experimental protocols that compared feeding and housing practices normally used in each county to treatments aiming at improving animal welfare. Samples were taken at the $8^{th}$ rib of Longissimus thoracis muscle 24h after slaughter, They were kept refrigerated ( $2-4^{\circ}C$) under vacuum package for 6d and then frozen ($-20^{\circ}C$) until meat quality evaluation. Measurements included pH, color (Hunter Lab system), shear force, chemical composition (DM, Ash, Ether Extract, collagen and haematin content), weight and area cooking losses and a sensory evaluation by a group of panelists. A sample of meat was ground with a blade mill and scanned in duplicate between 1100 and 1498 nm (FOSS NIR Systems 5000). WinISI software was used to develop a discriminating equation using NIR spectra (SNV-detrend, derivative=1, gap=4nm, smooth=4nm). The Proc ANOVA and DISCRIM of SAS were used for all the laboratory determinations. County of production had a significant (P<0.01) effect on all the parameters. However, discriminant analysis using any or few laboratory parameters resulted in great errors of county classification. A more accurate (98.8%) classification was obtained only when using all the laboratory parameters. NIRS classified correctly 354 of the 356 samples (99.4%). Provided with a larger data set, NIRS could be used to identify country of production of veal meat.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.41-49
• /
• 1999

A feasibility study is performed for practical application of a Ventilating Water-Jet(VWJ) propulsor which attracts new attention as a candidate propulsor for super-high speed vessels. Super-cavitating foil sections are adopted for the rotor blades since the rotor is operating at ventilating condition. Wedge type and cavitator type foil sections are used for the design of rotor blades. Other geometric characteristics of rotors are selected from the Kaplan type ducted propeller rotors. The test section of KRISO cavitation tunnel is modified to perform open-water tests of the VWJ propulsors. The tests are performed both at fully-submerged and free-jet conditions. Ventilation occurred at the free-jet condition by sucking the air in the downstream side of the rotor, which easily develops as super-cavitation when the rotor operates at lower advance coefficients. Spoilers are attached at the trailing end of the pressure side of the blade section, in order to increase the lift force.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.382-386
• /
• 2009

The life of a component decreases when it was exposed at the extreme condition. A turbine blade of a turbopump used for a liquid rocket engine is operated under the environment of high temperature and pressure, and experienced high centrifugal force. Thus the durability of the turbopump operated under the these conditions become lower than expected because of the severe fatigue and creep influence. The damage of the turbine being considered the fatigue and the creep influence is estimated to ensure the durability of turbopump turbine. ABAQUS/CAE and MSC.Fatigue are used for the fatigue analysis, and Larson-Miller parameter and robinson's rule are used for the creep analysis. In this paper, comparison and analysis of the fatigue and the creep influence were performed to ensure the life expectancy of turbopump turbine.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2C
• /
• pp.61-68
• /
• 2012

In general, verticality error necessarily occurs in marine pile foundation due to construction error or marine environmental effects. In marine structure, design by vertical load rather than horizontal load is dominant, but in the offshore wind turbine foundation, horizontal load is dominant. As the structure type that has dynamic movement by blade rotation, verticality error may have structurally significant effects. In this study, structural response feature of foundation and ground were analyzed according to verticality error of monopile foundation of 5MW offshore wind turbine. Marine environmental load was calculated per ISO standard and the margin of verticality error was calculated to be $L/{\infty}$(=0), L/300, L/200 and L/100. As a result of analysis, it was found that the maximum value of member force of the foundation with L/100 error increased about 7.2% compared to the monopile without verticality error.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1227-1233
• /
• 2010

In the hot section of a gas turbine, the turbine blades were protected from high temperature by providing a thermal barrier coating (TBC) as well as by cooling air flowing through internal passages within the blades. The cooling air then passed through discrete holes on the blade surface, creating a film of cooling air that further protects the surface from the hot mainstream flow. The holes are subjected to stresses resulting from the lateral growth of thermally grown oxide, the thermal expansion misfit between the constituent layers, and the centrifugal force due to high-speed revolution; these stresses often result in cracking. In this study, the deformation and cracks occurring near a hole on a heat-resistant alloy subjected to thermo-mechanical cycling were investigated. The experiment showed that cracks formed around the hole depending on the applied stress level and the number of cycles. These results could be explained by our analytic solution.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1489-1495
• /
• 2012

In this study, we perform the structural analysis of a floating offshore wind turbine tower by considering the dynamic response of the floating platform. A multibody system consisting of three blades, a hub, a nacelle, the platform, and the tower is used to model the floating wind turbine. The blades and the tower are modeled as flexible bodies using three-dimensional beam elements. The aerodynamic force on the blades is calculated by the Blade Element Momentum (BEM) theory with hub rotation. The hydrostatic, hydrodynamic, and mooring forces are considered for the platform. The structural dynamic responses of the tower are simulated by numerically solving the equations of motion. From the simulation results, the time history of the internal forces at the nodes, such as the bending moment and stress, are obtained. In conclusion, the internal forces are compared with those obtained from static analysis to assess the effects of wave loads on the structural stability of the tower.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.203-209
• /
• 2012

In this paper, cross-sectional stiffnesses, static stresses, and dynamic natural frequencies are analyzed to examine the structural performance of wind turbine composite blades. The material properties of composite materials are based on room-temperature and radiation curing processes. The cross-sectional stiffnesses of composite blades are calculated by applying a beam theory with solid-profile cross sections. The wind turbine blades are modeled with a finite element program, and static analyses are carried out to check the maximum displacement and stress of the blades. In addition, dynamic analyses are performed to predict the rotating natural frequencies of the composite blades including the effects of centrifugal force. By comparing these analysis results, mainly owing to the material properties of composite materials, an improvement in the structural performance of the blades according to the curing process is investigated.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.169-179
• /
• 2005

In the 500m short track speed skating, the matter of who reaches the first corner first can important factor since each competitor races with all speed from the start to the first line. A filed study was attempted to kinematical estimation six female foreign skaters, who participated in the 500m female final round competition, and two Korea skates during the World Short track Skating Championship. The three dimensional motion analysis with DLT method was executed using four video cameras for analyzing the actual competition situation. In point of analyzing the actual competition situation, it is expected that skaters and coaches the effective informations, and the following conclusions are drawn; The elapsed time by phase in start motion of the foreign skaters appeared shorter those of Korea skaters, so the start training of Korea skaters should be strengthed. Also the displacement of C.G in the foreign skaters appeared shorter displacement than those of Korea skaters. Especially in the starting position, the foreign skaters are superior to Korea skaters in displacement of first(left) and next following stroke(right). The velocity of C.G and maximum velocity of skate blade of foreign skaters art faster than those of Korea skaters. And the foreign skaters show the superior early velocity change. Both of leaning body angle, and left and knee angle of the foreign skaters lead to positive point of having the propulsive force in the early starting position. Observing in the most prominent feature of foreign and Korea skaters in start phase, foreign skaters skate quickly the third stroke. These features of Korea skaters would appear disadvantage of location selection in entering the coner course.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.815-826
• /
• 2009

The paper presents a case study addressing the design and construction aspects for DCM(Deep Cement Mixing) method employed as the foundation of a caisson type breakwater with heavy weight(10,700 ton/EA) and a high design wave height($H_{1/3}$=8.7m). The DCM was designed for the project(Ulsan New Port North Breakwater Phase 1) by optimizing the pattern of DCM columns with a combination of short and long columns (i.e., block type(upper 3m)+wall type(lower)) and considering overlapped section between columns as a critical section against shear force where the coefficient of effective width of treated column($\alpha$) was estimated with caution. It was shown that the value can be 0.9 under the condition with the overlapped width of 30cm. In addition to that, a field trial test was performed after improving conventional DCM equipment (e.g., mixing blades, cement paste supplying pipes, multi auger motor, etc.) to establish a standardized DCM construction cycle (withdrawal rate of mixing blades) which can provide the prescribed strength. The result of the field strength test for cored DCM specimens shows that the averaged strength is larger than the target strength and the distribution of the strength(with a defect rate of 7%) also satisfies with the quality control normal distribution curve which allows defect rate of 15.9%.