• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.334-339
• /
• 1995

To investigate the utilization of fly ash in agriculture, sorghum [Sorghum bicolor(L.) Moench] was used as the test crop. Soil was treated in pot experiments with anthracite and bituminous fly ash at 5 levels of 0, 6, 12, 18, and 24%, respectively. Growth status in terms of plant height and the number of nodes was improved in the order of bituminous treatment > anthracite treatment > control. The increment of fly ash had a positive effects on plant growth in both anthracite and bituminous treatment. The ratio of the senescent leaves to the all leaves during the maturing period was higher in fly ash treatments than in the control. As increasing the fly ash treatment, the ratio of senescent leaves was increased. Total yield was higher in the order of bituminous treatment > anthracite treatment > control. Grain yield also was higher in fly ash treatment than in the control. Bituminous fly ash treatments were more favourable in grain yield than anthracite. The increment of up to 12% fly ash to soil increased grain yield in both anthracite and bituminous. Application of bituminous fly ash could be recommended due to the fact that high pH of soil is favorable for growth of sorghum.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.5-12
• /
• 1998

Pot experiment was conducted to investigate the effects of fly ash on growth responses and on accumulation of the heavy metals in soil. Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 0.4, 0.8, and 1.2 kg/pot(20L). Tobacco growth was better by application of fly ash than that by the control. However, the early stage of growth by application of bituminous coal, 1.2 kg/pot, was decreased due to the boron toxicity occurred by fly ash. Generally, tobacco yield was significantly increased with applying fly ash, showing the highest yield at 1.2 kg/pot for anthracite and at 0.8 kg/pot for bituminous coal. The content of total nitrogen in leaves was higher with fly ash than that of the control, while the content of calcium in leaves was low, Contents of heavy metal and the other minerals were not significantly different between the control and the treatment of fly ash. Soil pH after experiment was linearly increased with application level of fly ash, indicating that the application of bituminous coal was more effective than that of anthracite. Contents of available phosphate, exchangeable $Ca^{2+}$+ and $Mg^{2+}$ in soil were increased by application of fly ash, especially with bituminous coal. Contents of Cu, Cr, and Ni were increased with application level of bituminous coati even if the contents were still lower than critical levels for farming land. The other heavy metals were similar between the control and the application of fly ash.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.92-101
• /
• 1997

This study was conducted to investigate the effect of fly ash on the yield and quality and to determine the optimum application amount of fly ash for tobacco(Nicotiana tabacum L). Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 20, 40, 60 MT/ha. Dry weights of tobacco at middle and topping growth stage were increased with application of fly ash, showing the highest dry weight at 40 MT/ha in both kinds of fly ash. It was showed that the bituminous coal had a little more effective for yield than that of anthracite. Comparing with the control, yields of tobacco applied with fly ash were significantly increased about 17.7% and 17.1% by the application of bituminous coal and anthracite, respectively. Quality of flue-cured leaves was better by application of fly ash than that of the control. The quality index was given the highest at 40 MT/ha for bituminous coal increasing by 24.6% and at 60 MT/ha fur anthracite increasing by 13.4% compared with the control. The economical efficiency considered of the yield and quality of tobacco was the highest at 40 MT/ha of bituminous. Soil pH, contents of available P2O5, organic matter, exchangeable Ca2+ and Mg2+ of soil during the growing season were increased by application of fly ash, showing more effectiveness in bituminous than that in anthracite. By the application of fly ash, the nutrients availability and the acidity of soil were reformed and they caused significantly the increase of growths yield, and quality of tobacco. By the application of lime reforming soil acidity, growth response, yields and quality of tobacco were not increased compared to the control, although the effect of reforming soil pH was remarkable.

• Journal of Environmental Impact Assessment
• /
• v.8 no.4
• /
• pp.25-35
• /
• 1999

Fly ash, by-product from coal fired power station, has long been regarded as a potential contamination source for heavy metals and inorganics due to their enriched concentrations and associations with particle surface. Feed coal and fly ash samples were collected from two power stations; Yongdong deliang with domestic anthracite coals and Boryong with imported bituminous coals. The coal and fly ash samples were analyzed for chemical composition and mineral components, using XRF and XRD. Batch leaching experiments were conducted by agitating samples with deionised water for 24 hours. Anthracite coals are generally higher in Al and Si contents than bituminous coals. This is due to the higher ash contents of the anthracite coal than bituminous coal. The chemistry of the two fly ash samples shows broadly similar compositions each other, except for the characteristically high contents of Cr in anthracite coal fly ash. Leaching experiments revealed that concentrations of metals gradually decreased with leachings in general. However, measurable amounts of metals were present in the effluent from weathered ash and the samples subjected to the leaching procedure. These metals are likely to indicate that the metals in fly ash were incorporated into glass fraction as well as associated with particle surface of samples. Dissolution of aluminosilicate glass would control releasing heavy metals from fly ash as weathering progresses during landfill with implication of possible groundwater contamination through fly ash landfill.

• Plant Journal
• /
• v.18 no.1
• /
• pp.55-61
• /
• 2022

In this study, I analyzed the effect of slagging caused by blending bituminous coal and subbituminous coal while maintaining the generator output, combustion conditions, and ventilation conditions for 870MW thermal power plant designed with bituminous coal. Accordingly I proposed an acceptable method of blending coal method. the blending ratio of sub-bituminous coal was adjusted to 10%, 20%, 40%, 60%, 80%, etc. to confirm ultimate analysis, proximate analysis, ash fusion temperature change, slagging indices, etc. Proper blending coal conditions are blending with sub-bituminous coal at 40% or less, ratio of base component to acid component(B/A) is 0.4 or less or 1 or more, total alkali(TA) is 3.5 or less, fusion slagging index(Rfs) is 1,345℃ or more, and ash content is 13% or less in ultimate analysis, the ash content in proximate analysis is 15% or less, and the initial deformation temperature(IDT) should be at least 1,200℃ or more

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.107-109
• /
• 2012

In Korean coal power plants, rising coal prices have recently led to the rapid utilization of low lank coals such as sub-bituminous coal with low calorific values and low ash fusion temperatures. Using these coals beyond the design range has resulted in important issues including slagging and fouling, which cause negative effects in boiler performances and unstable operations. The purpose of this study is to observe slagging and fouling characteristics resulted from burning various ranks of pulverized coals. We have tested 3 different coals: FLAME(bituminous), KCH(sub-bituminous) and MOOLARBEN(bituminous)coals in the pilot system $50kW_{th}$ scale. A stainless steel tube with preheated air inside was installed in the downstream in order to simulate water wall. Collected ash on the probe and the slag inside the furnace near burner were analyzed by SEM (scanning electron microscopy) to verify the formation degree, surface features and color changes of the pasty ash particles. Induced coupled plasma and energy dispersive X-ray spectroscopy were also performed to figure out the chemical characteristics of collected samples. As a result, KCH was observed that more slag was developed inside the walls of the furnace and on the probe than the other two kinds of coals, as shown in the calculate slagging and fouling indices as well.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.16-23
• /
• 2004

To increase the recycling rate of anthracite fly ash, the properties of anthracite fly ash were compared to that of bituminous fly ash. Especially, the high temperature properties of the fly ash are investigated by using thermal analysis, high temperature microscope and X-ray diffraction analysis for utilizing anthracite fly ash to prepare the calcinated bricks. The average ratio of $A1_2$$O_3$/$SiO_2$ for anthracite is 0.62 and the ratio for bituminous is 0.34. The content of $SiO_2$ in anthracite fly ash was higher than that of bituminous fly ash. The $A1_2$$O_3$ of anthracite fly ash reacted with the $A1_2$$O_3$ in the fly ash and formed new mullite crystal at over $1000^{\circ}C$, so anthracite fly ash showed high fire resistance. And, the fly ash mixtures having kaolin were prepared, and then extruded in vacuum to evaluate the extruding property of anthracite fly ash mixture. The extruding velocity was decrease with increasing the addition amount of fly ash in the mixture, and the maximum addition amount of fly ash that could be extruded was 60 wt%.

• Journal of the Korean Society of Combustion
• /
• v.10 no.3
• /
• pp.1-9
• /
• 2005

The characteristics of co-combustion of Korean anthracite and bituminous coal was determined in a TGA and a lab-scale CFB reactor. The combustion reactivity of Korean anthracite (E = 51.2 kcal/mol) was much lower than that of bituminous coal (E = 14.5 kcal/mol). As the addition amount of the bituminous coal into the anthracite was increased, the reactivity of the anthracite was found to be improved. The effluent rate of the emission gases from the CFB reactor was not changed appreciably when each coal burned. As the bituminous coal was added, however, the effluent rate of the emissions was increased. The unburned carbon in fly ash from the CFB reactor was decreased with increasing the ratio of bituminous coal in co-combustion. But as the ratio of the bituminous coal was larger than 40 %, the combustion reactivity was not increased any more.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.44-49
• /
• 1996

One of the most serious problems in utilizing the fly-ash produced from damcstic coal-firing power plants is lhc unburned-carbon mntained m the fly-ash In this shldy, the effects of fruther and collector an the yield,recuvery,unburnedcarbon rejectiou peiccntage,and process efficiency of product (cleaned fly-ash) wcrc examined when convzntional froth flotation was applied to rejcct the unburned-carbon included in the fly-ash of bituminous coal Alsa,the ash analysis for both thc raw and the clcaned fly-ash was conducted to review the change in thc major elements of fly-ash. Experimental results shawcd lhat tlle rcjectlon oI the unburned-cubon of thc raw fly-ash sample is available upto 92.4% using fiath flotalian and that the putity ol the pmdud(c1eancd fly-ash) attains up to 99.4%.

• Journal of the Korean Ceramic Society
• /
• v.37 no.8
• /
• pp.811-816
• /
• 2000

This paper discussed hydrothermal reactivity of Ca(OH)2 and classified bituminous fly ashes which were collected at an electrostatic precipitator in coal fired power plant at 181$^{\circ}C$. The major products of hydrothermal reaction were tobermorite and hydrogrossularite because bituminous fly ashes contained Al2O3 content greater than 20 wt%. As increasing amount of Al2O3 content greater than 20 wt%. As increasing amount of Al2O3 in glass phases, formation of hydrogrossularite increased. Formation rate of crystalline tobermorite increased with content of finer particles, higher glass content and more Al2O3 in glass phases. There was a positive correlation between residue on 45${\mu}{\textrm}{m}$ sieve and hydrothermal reactivity of fly ash up to 3 hours. The hydrothermal reactivity of fly ash at 181$^{\circ}C$ for 12 hours was more affected by fineness than by glass content of fly ash.