• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.159-165
• /
• 2010

The Multi-code (Mc) modulation has been developed for high-speed data transmission over the wireless environments, but it suffers two critical problems due to the limited resource of Orthogonal Codes (OC) and high Peak-Average Power Ratio (PAPR). In this paper, we propose a novel modulation technique called AOCG [1] (Advanced Orthogonal Code Group)-OFDM (Orthogonal Frequency Division Multiplexing) to solve the above problems and obtain the variable high bit rates which can be controlled by the four parameters depending on the quality of services (QoS) required by users.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.1
• /
• pp.25-30
• /
• 1972

Data Communication by sending pulse train and verifying the lock-in of a phase locked loop in receiving end is studied. The noise rejection property inherent to PLL is analysed. By using about six pulses in a train, data transimission rate of 20k bit/sec. in a telephone cable is achieved, thus permitting high speed data communication and an exellent immunity against noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.569-578
• /
• 2002

This paper proposes a new multicarrier code division multiple access (CDMA) system. The proposed multicarrier CDMA system provides the advantages that the transmission bandwidth is more efficiently utilized by using divided spreading sequence, time and frequency diversity is achieved in frequency selective nultipath (acting channel, and inter-carrier interference (ICI) can be minimized by using specific data and code pattern. In this system, transmitted data bits are serial-to-parallel converted to some parallel branches. On each branch each bit is direct-sequence spread-spectrum modulated by divided spreading sequences and transmitted using orthogonal carriers. The receiver providers a Rake for each carrier, and the outputs of Rakes are combined to get time and frequency diversity. This multicarrier CDMA system allows additional flexibility in the choice of system parameters. Upon varying system parameters, bit error rate (BER) performance is examined for the proposed multicarrier CDMA system. Simulation results show that the proposed multicarrier CDMA scheme can achieve better performance than the other types of conventional multicarrier CDMA systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.6
• /
• pp.498-508
• /
• 1991

This thesis presents a performance analysis algorithm that estimates erro performance of individual links, at the bit level, in an end-to-end digital connection using the model of 3-statte MarKov chain. The link model proposed the burst error behavior of each individual link. It also presents a method to concateante several individual links and extract a model for end-to-end digital connection. This resulting end-to-end model can be used to calculate performance parameters such as bit error rate(BER) and block error(BLER) for any block size.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.342-345
• /
• 2004

An efficient hybrid ARQ scheme based on the rate compatible block turbo codes has been proposed, and its performance has been analyzed. System efficiency is improved by means of adaptive rate code transmission using channel information, trading off bit rate for channel codes, with resulting energy saving. The rate adaptation scheme improves power efficiency while keeping packet delay minimized. On the other hand, power dependant strategies reduce power consumption. Simulation results show that the benefits obtained are very encouraging. The modified hybrid ARQ schemes with the channel information and efficient retransmission structures highly improve the throughput performance in the satellite communication system. Therefore, proposed schemes could be used in future communication systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.215-219
• /
• 2014

In holographic data storage (HDS), a high transmission rate is accomplished through the use of a charge coupled device array for reading two-dimensional (2D) pixel image data. Although HDS has many advantages in terms of storage capacity and data transmission rates, it also features problems, such as 2D intersymbol interference (ISI) by neighboring pixels and interpage interference (IPI) by multiple images stored in the same holographic volume. Modulation codes can be used to remove these problems. We introduce a 2D 8/9 error-correcting modulation code. The proposed modulation code exploits the trellis-coded modulation scheme, and the code rate is larger (about 0.889) than that of the conventional 6/8 balanced modulation code (an increase of approximately 13.9%). The performance of the bit error rate (BER) with the proposed scheme was improved compared with that of the 6/8 balanced modulation code and the simple 8/9 code without the trellis scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.9-14
• /
• 2016

In the holographic data storage system, the data can be stored more than one bit per pixel and the storage capacity and transmission rate can be increased. In this paper, we proposed a sparse-ON pixel 4/6 balanced-modulation code that the code rate is 1.33 (bit/pixel) with uniform page density. Even though the performance of the proposed sparse-ON pixel 4/6 balanced-code is similar to 2/3 and 6/9 modulation codes, it can increase the storage capacity more than these modulation codes and also store more pages in a volume by reducing the rate of ON pixels to mitigate IPI (inter-page interference).

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2940-2947
• /
• 2000

In the wireless ATM networks, a Medium Access Control (MAC) protocol is required to support an integrated mix of multimedia traffic services. The MAC protocol should be designed in a way that the limited wireless bandwidth can be efficiently utilized maximizing the Quality of Service (QoS) guarantees for various traffic service classes. In this paper, a Dynamic Resource Allocation-based MAC protocol, which satisfies QoS of each traffic service class in the wireless ATM environment, is proposed. The proposed MAC protocol adopts the dynamic channel allocation schemes for a mix of different traffic service classes. The suggested MAC protocol is designed to provide the QoS guarantees for Constant Bit Rate (CBR) or real-time Variable Bit Rate (VBR) traffic through fixed or dynamic reservation. For Available Bit Rate (ABH) traffic, which has the lowest priority among the traffic classes, large improvement in delay by reserving the minimum bandwidth is shown. And for real-time VBR traffic, increase in throughput of transmission is demonstrated because of bandwidth, which is allocated through contention at the initial phase and without contention thereafter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.132-138
• /
• 2012

VANET(Vehicular Ad-hoc Network), standardization of IEEE 802.11p specification is in process. 802.11 MAC protocol grants all nodes equal opportunity to acquire channel without regard to their bit-rates, making it possible for lower bit-rate nodes to occupy communication channel for a fair amount of time thus keeping the higher bit-rate nodes from acquiring connection channel which downward-equalize the overall network performance. Also with the 802.11p MAC protocol, the probability of collision occurring increases as the number of nodes grow. The proposed algorithm is a new MAC protocol that guarantees nodes with acquired channel a firm priority over other nodes for a fixed amount of time with TXOP concept added to 'packet burst' according to the current transmitting speed. This newly designed algorithm allows the construction of wireless network with enhanced network throughput, decreased probability of collisions as well as providing the means to grant each node a fair chance of acquiring connection according to their channel conditions. The algorithm sets the CW's (Contention Window) width wider than the standard's and modulates the continuous transmitting threshold value depending on channel acquired time, thus improving the overall performance of the network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.390-399
• /
• 1988

A conventional BTC has the merit of real time processing and simple computation, but has the problem that its compression rate is low. In this paper, a modified BTC using the Quad Tree which is frequently used in binary image is proposed. The method results in the low compression rate by decreasing the total number of subblocks by mean of making the size of a subblock large in the small variation area of graty level and the size af a subblock small in the large variation area of gary level. For the effective transmission of bit plane, the Huffman run-lengh code for the large size of a subblock and the lookup table for tha small size of a subblock are used. The proposed BTC method show the result of coding 256 level image at the average data rate of about 0.8 bit/pixel.