• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.573-574
• /
• 1992

We developed a recognition and tracking system of moving objects. The system consists of one CCD video camera, two DC motors in horizontal and vertical axles with encoders, pluse width modulation(PWM) driving unit, 16 bit NEC 9801 microcomputer, and their interfaces. The recognition and tracking system is able to recognize shape and size of a moving object and is able to track the object within a certain range of errors. This paper presents the brief introduction of the recognition and tracking system developed in our laboratory.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.3-5
• /
• 2007

This paper presents decision feedback equalizers using a recurrent neural network trained algorithm using extended Kalman filter(EKF) and sigma-point Kalman filter(SPKF). EKF is propagated, analytically through the first-order linearization of the nonlinear system. This can introduce large errors in the true posterior mean and covariance of the Gaussian random variable. The SPKF addresses this problem by using a deterministic sampling approach. The features of the proposed recurrent neural equalizer And we investigate the bit error rate(BER) between EKF and SPKF.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.81-85
• /
• 1991

In this paper, we present a motion compensated video compression method based on both block and object motions. A simplified objectoriented motion parameter is estimated from the block based motion vectors. A decision rule for the global or local MCP modes is established. Simulation results show that the proposed method has lower bit-rates than the BMA based method at the same reconstruction errors.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.68-72
• /
• 1998

본 논문에서는 기존의 DPCM에 의한 압축방법보다 더 낮은 비트율을 갖는 압축방 법을 제안한다. 각 화소의 예측오차 값은 DPCM방법에 의해 양자화되고, 양자화된 예측오차 의 열은 예측오차의 학습된 열로 구성된 코드북과 비교된다. 비교과정은 벡터양자화 방법과 동일하고, 그 결과 코드북의 주소를 생성한다. 제안된 방법은 DPCM과 동일한 복원 영상의 화질을 보이지만, 더 낮은 비트율을 얻을 수 있다.

• Journal of Convergence for Information Technology
• /
• v.10 no.9
• /
• pp.22-27
• /
• 2020

In the fifth generation (5G) networks, the mobile services require much faster connections than in the fourth generation (4G) mobile networks. Recently, as one of the promising 5G technologies, non-orthogonal multiple access (NOMA) has been drawing attention. In NOMA, the users share the frequency and time, so that the more users can be served simultaneously. NOMA has several superiorites over orthogonal multiple access (OMA) of long term evolution (LTE), such as higher system capacity and low transmission latency. In this paper, we investigate impact of channel estimation errors on successive interference cancellation (SIC) performance of NOMA. First, the closed-form expression of the bit-error rate (BER) with channel estimation errors is derived, And then the BER with channel estimation errors is compared to that with the perfect channel estimation. In addition, the signal-to-noise (SNR) loss due to channel estimation errors is analyzed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.230-236
• /
• 2022

In this paper, we propose an efficient concatenated code for both random and ISI errors on diffusion-based molecular communication channels. The proposed concatenated code was constructed by combining the ISI-mitigating code designed for ISI mitigation and the ISI-Hamming code strong against random errors, and the BER(bit error rate) performance was analyzed through simulation. In the case of the above M=1,200 channel environment, it was found that the error rate performance of the concatenated code follows the error rate performance of the ISI-mitigating code, which is strong against ISI, and follows the error rate performance of the ISI-Hamming code, which is strong against random errors, in the channel environment below M=600. In M=600~1,200, the concatenated code shows the best error rate performance among those of three codes, which is analyzed because it can correct both random errors and errors caused by ISI. In the following cases of below M=800, it can be seen that the error rate of the concatenated code and the ISI-mitigating code shows an error rate difference of about 1.0×10^-1 on average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.294-301
• /
• 2013

OFDM technique uses multiple sub-carriers for the data transmission. Therefore, bit error rate increases because of inter-carrier interference caused by nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over multi path fading channels is characterized by small transmission gain in multiple sub-carrier frequency interval. Therefore bit error rate increases because of burst errors. Inter-leaver and convolution error control coding are effective for the reduction of this burst error. Pilot symbol is used for the channel estimation in OFDM systems. However, imperfect channel estimates in this systems degrade the performance. The performance of this convolution coding OFDM systems using inter-leaver, gauged by the bit error rate, is analyzed considering the nonlinear high power amplifier, carrier frequency offset and channel estimation error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10C
• /
• pp.798-804
• /
• 2008

This paper proposes a low-power circuit for detecting and correcting L2 cache errors during microprocessor data image processing. A simplescalar-ARM is used to analyze input and output data by accessing the microprocessor's L2 cache during image processing in terms of the data input and output frequency as well as the variation of each bit for 32-bit processing. The circuit is implemented based on an H-matrix capable of achieving low power consumption by extracting bits with small and large amounts of variation and allocating bits with similarities in variation. Simulation is performed using H-spice to compare power consumption of the proposed circuit to the odd-weight-column code used in a conventional microprocessor. The experimental results indicated that the proposed circuit reduced power consumption by 17% compared to the odd-weight-column code.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.31-40
• /
• 2022

This paper proposes an augmented QSBC(Quantum Short-Block Code) that preserves the function of the existing QSBC and adds a single bit-flip error correction function due to Pauli X and Y errors. The augmented QSBC provides the diagnosis and automatic correction of a single Pauli X error by inserting additional auxiliary qubits and Toffoli gates as many as the number of information words into the existing QSBC. In this paper, the general expansion method of the augmented QSBC using seed vector and the realization method of the Toffoli gate of the single bit-flip error automatic correction function reflecting the scalability are also presented. The augmented QSBC proposed in this paper has a trade-off with a coding rate of at least 1/3 and at most 1/2 due to the insertion of auxiliary qubits.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.516-521
• /
• 2022

In this paper, a compact 4-bit chipless RFID(radio frequency identification) tag using a modified ELC(electric field-coupled inductive-capacitive) resonator and multiple slot resonators is proposed. The modified ELC resonator uses an interdigital-capacitor structure in the conventional ELC resonator to lower the resonance peak frequency of the RCS. The multiple slot resonators are designed by etching three slots with different lengths into an inverted U-shaped conductor. The resonant peak frequency of the RCS for the modified ELC resonator is 3.216 GHz, whereas those of the multiple slot resonators are set at 4.122 GHz, 4.64 GHz, and 5.304 GHz, respectively. The proposed compact four-bit tag is fabricated on an RF-301 substrate with dimensions of 50 mm×20 mm and a thickness of 0.8 mm. Experiment results show that the resonant peak frequencies of the fabricated four-bit chipless RFID tag are 3.285 GHz, 4.09 GHz, 4.63 GHz, and 5.31 GHz, respectively, which is similar to the simulation results with errors in the range between 0.78% and 2.16%.