• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.211-217
• /
• 2019

In this study, we compare and analyze the attributes of the software development cost model according to the shape parameters change of the Type-2 Gumbel lifetime distribution using the NHPP model. In order to analyze the software failure phenomena, the parametric estimation is applied to the maximum likelihood estimation method, and the nonlinear equations are calculated using the bisection method. As a result, when the attributes of the cost curves according to the change of shape parameters are compared, it is found that the larger the number of shape parameters, the lower the software development cost and the faster the release time. Through this study, it is expected that it will be helpful for the software developers to search for the development cost according to the software shape parameters change, and also to provide the necessary information for the attributes of the software development cost.

• Journal of Embryo Transfer
• /
• v.20 no.2
• /
• pp.169-176
• /
• 2005

Loop-mediated isothermal amplification (LAMP) is novel DNA amplification methods that amplifies a target sequence specifically under isothemal condition. The present study was to assess the in vitro viability afier biopsy and sexing rate of different types of embryo biopsied. In vivo compact morulae and blastocyst embryos were obtained from Korean Native Cow (KNC) superovulated with FSH (Antorin, R-10) on 7 Day after artificial insemination. in vitro compact morulae and blastocyst embryos were obtained with KNC or Holsteins that were gained on 6, 7 or 8 day after in vitro fertilization(IVF) with frozen semen. Biopsy of bovine embryo was carried out in a $80{\mu}l$ drop with $Ca^{2+}-Mg^{2+}$ free D-PBS and the viability of biopsied embryos were evaluated in IVMD (IFP, Japan) medium at 12 hrs culture time. The sex ratio of biopsied Hanwoo embryos were male vs. female of $43.5\%\;vs.\;56.5\%$ in vivo and $33.9\%\;vs.\;49.2\%$ in vitro respectively, and male rate of biopsied Holstein embryos were significantly higher than female $(70.8\;vs.\;29.2\%)$. and indefinite rate of in vitro embryos was $16.9\%$ and in vivo was not. The degeneration rate of biopsied embryo, in vitro embryos were significantly higher than in vivo $(13.2\%\;vs,\;0.0\%,\;p<0.05)$. The survivability of in vivo embryo were between biopsied following punching method was significantly (P<0.05) higher than bisection method produced embryos $(100\%\;vs.\;83.3\%)$ and in vitro had no difference. However, the degeneration rate of biopsied embryo by bisection method was significantly higher than punching methods between in vivo and in vitro $(16.7\;vs.\;22.6\%,\;respectively,\;p<0.05)$. In conclusion, these results indicate that punching method was optimal and survivability after embryo biopsy was useful for reducing the damage caused by the embryo biopsy procedure for LAMP-based embryo sexing.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.199-205
• /
• 2013

The present study was conducted to compare on embryo survival rates by blastomere isolation methods, and establish the optimal PCR procedure for perform the sexing of bovine blastocysts produced by IVF. IVF embryos used in the study was used the Bisected or Sliced methods for blastomere isolation, and the survival rates of blastocyst with rapid way of sexing PCR was assessed. In the present study for survival rates in blastocyst was the total cleavage rate was 75% and a blastocyst development among cleaved embryos was 40%. Survival rate of embryos treated with intact, bisected or sliced method was 100, 63.3 or 81.3%, respectively. Therefore, survival rate of embryos treated with sliced method was higher compared to that of embryos treated with bisected method. The sexing rate of female or male was not significantly different between S4BFBR primer and BSY + BSP primer (1.75 : 1 vs. 1.43 : 1), respectively. Because of the PCR amplification using the S4BFBR primer was simpler method than multiplex PCR amplification method. Furthermore, the accuracy of sexing rate and reduction of PCR work time between 2-step and 3-step of PCR methods was 98.0% / 1.5 hr and 97.0% / 3.5 hr, respectively. Based on these results, it can be suggested that the sliced and PCR methods we developed was very effective method to reduce time consuming and procedure of PCR amplification for sexing with the increase of survival rate on the blastocyst.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.883-890
• /
• 2015

As the semiconductor processing technology has been developing, multiple cores or NoC(network on chip) can be contained in recent chips. GALS(globally asychronous locally synchronous) clocking scheme that has multi-clock domains with different frequencies or phase differences is widely used to solve power consumption and clock skew in a large chip with a single clock. A synchronizer is needed to avoid a synchronization problem between sender and receiver in GALS. In this paper, the setup and hold time of DFF required to design the synchronizer are measured using 180nm CMOS processing parameters depending on temperature, supply voltage, and the size of inverter in DFF. The simulation results based on the bisection method in HSPICE show that the setup and hold time are proportional to temperature, however they are inversely proportional to supply voltage, and negative values are measured for the hold time.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.393-400
• /
• 2001

This paper presents a stochastic model for the software failure phenomenon based on a nonhomogeneous Poisson process (NHPP). The failure process is analyzed to develop a suitable mean value function for the NHPP ; expressions are given for several performance measure. Actual software failure data are compared with generalized model by Goel dependent on the constant reflecting the quality of testing. The performance measures and parametric inferences of the new models, Rayleigh and Gumbel distributions, are discussed. The results of the new models are applied to real software failure data and compared with Goel-Okumoto and Yamada, Ohba and Osaki models. Tools of parameter inference was used method of the maximun likelihood estimate and the bisection algorithm for the computing nonlinear root. In this paper, using the sum of the squared errors, model selection was employed. The numerical example by NTDS data was illustrated.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.5
• /
• pp.689-696
• /
• 2005

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, Goel-Okumoto and Yamada-Ohba-Osaki model was reviewed, proposes the Kappa(2) reliability model, which can capture the nomotonic decreasing nature of the failure occurrence rate per fault. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on sum of the squared errors and Kolmogorov distance, for the sake of efficient model, was employed. Analysis of failure using real data set, SYS2(Allen P.Nikora and Michael R.Lyu), for the sake of proposing two parameter of the Kappa distribution, was employed. This analysis of failure data compared with the Kappa model and the existing model using arithmetic and Laplace trend tests, bias tests is presented.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1430-1439
• /
• 2019

In Functional Mockup Interface(FMI)-based co-simulation, a bisectional algorithm can be used to find the zerocrossing point as a way to improve the accuracy of the simulation results. In this paper, the proposed master algorithm(MA) analyzes the repeated interval graph and predicts the next interval by applying the Markov Chain to the step size. In the simulation, we propose an algorithm to minimize the rollback by storing the step size that changes according to the graph type as an array and applying it to the next prediction interval when the rollback occurs in the simulation. Simulation results show that the proposed algorithm reduces the simulation time by more than 20% compared to the existing algorithm.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.51-60
• /
• 2007

Infinite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, exponential distribution and Rayleigh distribution model was reviewed, proposes the mixture reliability model, which made out efficiency substituted for situation for failure time Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE and Kolmogorov distance, for the sake of efficient model, was employed. Analysis of failure using S27 data set for the sake of proposing shape parameter of the mixture distribution was employed. This analysis of failure data compared with the mixture distribution model and the existing model(using arithmetic and Laplace trend tests, bias tests) is presented.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.33-42
• /
• 2007

Accurate predictions of software release times, and estimation of the reliability and availability of a software product require quantification of a critical element of the software testing process : test coverage. This model called Enhanced non-homogeneous poission process(ENHPP). In this paper, exponential coverage and S-shaped model was reviewed, proposes the Kappa coverage model, which maked out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE statistics and Kolmogorov distance, for the sake of efficient model, was employed. From the analysis of mission time, the result of this comparative study shows the excellent performance of Burr coverage model rather than exponential coverage and S-shaped model using NTDS data. This analysis of failure data compared with the Kappa coverage model and the existing model(using arithmetic and Laplace trend tests, bias tests) is presented.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.182-188
• /
• 2011

Purpose: The buttocks region has been associated with allure and sex appeal for centuries. Gluteal implants enable buttocks remodeling in a way that is not possible in other methods. One of the reasons that render gluteal implant surgeries unpopular is the fear of complications, the main problems being seroma, wound dehiscence, extrusion, and a visible or palpable implant. The authors present the XYZ technique, which provides anatomical reference points to guide the intramuscular dissection procedure in a feasible and safe way, resulting in a lower complication rate. Methods: The XYZ procedure was done for buttock augmentation on 8 patients from December 2009 to June 2010. Patient's ages ranged from 27 to 44 with a mean age of 36. Seven patients were applied the 250cc sized Elastomer implants with one patient 290cc sized implant. Preoperative marking was done with the patients in the standing position. Bisection of the gluteus maximus muscle was done at the midpoint thickness to create a plane for implant insertion, which is called the sandwich plane. Results: The 8 cases were performed safely without major complications. However one patient had minor wound dehiscence, and was managed with conservative treatment. Another patient had a discomfort on the buttocks for a long time. The patients were followed up for average 6 months. All patients were satisfied with the aesthetic results. Conclusion: In performing the XYZ technique for gluteal augmentation, the surgeon must split the muscle into two equal halves with anatomical reference points to guide the muscle detachment in a symmetrical way at an adequate depth. This method provides a guideline for the surgeon in determining the ideal plane during intramuscular dissection and gives predictable results with low complication rates. Intramuscular gluteoplasty with gluteal implants offers predictable, aesthetically pleasing results without contour irregularities and only a low incidence of major complications.