• 대한치과재료학회지
• /
• 제43권1호
• /
• pp.81-89
• /
• 2016

The purpose of this study was to evaluate the effect of the experimental and commercial fluoride varnishes on the Vickers hardness of bovine teeth. The experimental fluoride varnishes with 5 wt.% NaF were fabricated using Bis-GMA or rosin as the resin base. The components were mixed with over-head stirrer under warming up in a double boiler for 30 minutes. Four commercial fluoride varnishes (V-varnish, Flor-opal, Cavity shield, Fluor protector) were compared with the experimental fluoride varnishes. Vickers hardness was measured on the labial surface of bovine anterior teeth after applying fluoride varnish on 5th and 30th day. The surface of bovine teeth was observed with a scanning electron microscope before and after applying fluoride varnish and the change of the components on the bovine teeth surface was measured with EDX. In terms of hardness, the experimental rosin-based fluoride varnish showed significantly higher hardness on the 5th and 30th day than the control (bovine teeth without fluoride treatment)(p<0.05). EDX results showed that the fluoride content on the surface of bovine teeth treated with the experimental rosin-based fluoride varnish was highest on the 1st and 10th day. The higher hardness and fluoride content of experimental rosin-based fluoride varnish can be considered to be used as an effective fluoride varnish to prevent dental caries.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.355-361
• /
• 2020

Purpose: In this study, we added two kinds of photoinitiators (CQ and TPO) to prepare two kinds of denture base resins (Bis-GMA series and UDMA series) for three-dimensional (3D) printing to compare and analyze their mechanical and biological properties and to find the optimal composition. Methods: Control specimens were made using the mold made of polyvinyl siloxane of the same size. Light curing was performed twice for 20 seconds on both the upper and lower surfaces with LED (light emitting diode) light-curing unit (n=10). Experimental 3D printing dental resins were prepared, to which two photoinitiators were added. Digital light processing type 3D printer (EMBER, Autodesk, CA, USA) was used for 3D printing. The specimen size was 64 mm×10 mm×3.3 mm according to ISO 20795-1. The final specimens were tested for flexural strength and flexural modulus, and MTT test was performed. Furthermore, one-way analysis of variance was performed, and the post-test was analyzed by Duncan's test at α=0.05. Results: The flexural strength of both Bis-GMA+CQ (97.12±6.47 MPa) and UDMA+TPO (97.40±3.75 MPa) was significantly higher (p<0.05) in the experimental group. The flexural modulus in the experimental group of UDMA+TPO (2.56±0.06 GPa) was the highest (p<0.05). MTT test revealed that all the experimental groups showed more than 70% cell activity. Conclusion: The composition of UDMA+TPO showed excellent results in flexural strength, flexural modulus, and biocompatibility.

• 대한소아치과학회지
• /
• 제32권2호
• /
• pp.284-292
• /
• 2005

본 연구에서는 치과용 복합레진의 중합률에 영향을 미치는 다양한 광원인 할로겐, 플라즈마, LED를 사용하여 임상에서 사용하는 여러 치면열구전색제들을 중합 시, 이로부터 용리되는 미반응 모노머들을 확인하고 정량화하고자 하였다. 5가지의 광중합형 치면열구전색제를 각각의 광원에 따라 중합한 시편을 제작하여 3차 증류수에 넣은 후 바로 용리시킨 액을 0시간으로 하고 $37^{\circ}C$ 항온수조에서 10분, 1시간, 12시간, 24시간 보관한 후 각각의 용리액을 고성능 액체 크로마토그래피를 이용하여 미반응 모노머의 정성 및 정량 분석을 시행하였고, 다음과 같은 결과를 얻었다. 1. 표준 모노머들의 분리시간은 BPA 2.3분, TEGDMA 3.2분, UDMA 5.6분, Bis-GMA 6.5분, Bis-DMA 10.4분이었다. 2. 모든 치면열구전색제에서 TEGDMA를 제외한 어떠한 모노머들도 용리되지 않았다. 3. 저장 12시간까지 대부분의 TEGDMA가 용리되었으며, 이후부터는 그 양이 현저히 줄어드는 양상을 보였다. 4. 최소권장중합 시간인 할로겐 20초, 플라즈마 3초, LED 10초 중합 시 TEGDMA의 용리량은 할로겐, LED, 플라즈마 순으로 적었다. 5. 모든 중합기에서 Pit & Fissure $Sealant^{TM}$의 용리량이 가장 적었으며, 할로겐 중합시 $Helioseal^{(R)}$ F가, 플라즈마 아크중합 시 $Concise^{TM}$가, LED 중합 시 $Teethmate^{(R)}$ F-1이 가장 많은 용리량을 보였다.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.386-391
• /
• 2015

PURPOSE. The purpose of this preliminary study was to investigate the effects of adding 4,4'-bis(N,N-diethylamino) benzophenone (DEABP) as a co-initiator to a binary photoinitiating system (camphorquinone-amine) to analyze on the degree of conversion (DC) of a light-cured resin for dental 3D printing. MATERIALS AND METHODS. Cylindrical specimens (N=60, n=30 per group, ${\phi}5mm{\times}1mm$) were fabricated using bisphenol A glycerolate dimethacrylate (BisGMA) both with and without DEABP. The freshly mixed resins were exposed to light in a custom-made closed chamber with nine light-emitting diode lamps (wavelength: 405 nm; power: $840mW/cm^2$) for polymerization at each incidence of light-irradiation at 10, 30, 60, 180, and 300 seconds, while five specimens at a time were evaluated at each given irradiation point. Fourier-transform infrared (FTIR) spectroscopy was used to measure the DC values of the resins. Two-way analysis of variance and the Duncan post hoc test were used to analyze statistically significant differences between the groups and given times (${\alpha}$=.05). RESULTS. In the DEABP-containing resin, the DC values were significantly higher at all points in time (P<.001), and also the initial polymerization velocity was faster than in the DEABP-free resin. CONCLUSION. The addition of DEABP significantly enhanced the DC values and, thus, could potentially become an efficient photoinitiator when combined with a camphorquinone-amine system and may be utilized as a more advanced photopolymerization system for dental 3D printing.

• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.60-65
• /
• 2014

Teeth that have short clinical crown, which are not alone enough to support the definitive restoration can be best treated using the post and core system. The advantages of fiber post over conventional metallic post materials have led to its wide acceptance. In addition to that the combination of aesthetic and mechanical benefits of fiber post has provided it with a rise in the field of dentistry. Also the results obtained from some clinical trials have encouraged the clinicians to use the fiber posts confidently. Fiber posts are manufactured from pre-stretched fibers impregnated within a resin matrix. The fibers could that be of carbon, glass/silica, and quartz, whereas Epoxy and bis-GMA are the most widely used resin bases. But recently studies are also found to be going on for polyimide as possible material for the fiber post resin base as a substitute for the conventional materials.

• 대한치과의사협회지
• /
• 제34권12호통권331호
• /
• pp.855-860
• /
• 1996

치과용 복합레진은 bis GMA형의 monomer가 개발되고, 무기 filler가 첨가되어 물리적인 성질이 더욱 향상되었으며, 또한 법랑질에 대한 산부식법을 통하여 치아에 대한 결합력을 높을 수 있는 방법이 도입되면서 치과용 수복물로서 각광을 받아 왔다. 특히 복합레진은 이전까지 이용되었던 silicate cement 이나 acrylic resin에 비하여 변색이 적고, 원래의 형태를 비교적 잘 유지하는 장점을 가져서 전치부의 수복에 유용한 재료로 인식되었다. 복합레진을 이용한 전치부의 수복은 비교적 적은 치질의 삭제만으로도 가능하고, 심미적으로도 우수한 결과를 보이고 있어서 올바른 술식을 통하여 적절히 이용한다면 좋은 임상적인 결과를 얻을 수 있는 것이 사실이지만 재료학적인 한계가 아직 까지는 엄연히 존재한다. 복합레진을 이용한 전치부의 수복에 있어서, 복합레진의 문제점과 이를 줄이기 위한 방법, 임상시의 주의점 등에 관해 살펴보도록 한다.

• 통합자연과학논문집
• /
• 제12권2호
• /
• pp.29-34
• /
• 2019

In dental resin cement studies, viscosity is also an important factor in the adhesion of tooth defects and implants. This study used BisGMA and HPMA as the main ingredients, triethylene glycol dimethacrylate (TEGDMA) as a diluent, and benzoyl peroxide (BPO) as a photoinitiator. The physical properties of graphene oxide used as an additive for functionality were evaluated, and its use as a dental resin cement material was investigated.The rupture strength has the tendency to increase along with the increase of the ratio of graphene oxide that was added, which seemed to reflect the effect of the high strength property of graphene oxide. The flexural strength also has the tendency to increase when about 0.5% of graphene oxide was added the same as the increase of rupture strength.When graphene oxide was added, according to viscosity use, the utilization as high-quality dental resin cements will increase.

• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.247-255
• /
• 2004

이전의 연구에서 레진 재료를 포함한 여러 수복재료에서의 유출물이 우식 유발 세균의 성장에 영향을 줄 수 있다는 보고가 있었다. 이번 연구의 목적은 대표적인 우식 유발 세균인 Streptococcus mutans와 Streptococcus sobrinus의 성장에 대하여 레진을 구성하는 모노머들(Bis-GMA, TEGDMA, EGDMA, UDMA, HEMA, Camphoroquinone)이 어떠한 영향을 줄 수 있는지에 대하여 알아보고자 하는 것이다. 결과는 다음과 같다. 1. S. mutans와 S. sobrinus의 성장률은 6가지 레진 모노머 모두에서 0.03 mmol/L의 농도에 서 유의할만하게 감소되었다. 2. S. mutars의 성장률은 0.01 mmol/L 농도의 UDMA와 0.005mmol/L, 0.01 mmol/L 농도의 Camphoroquinone에서 대조군에 비하여 유의 할만하게 감소되었다. 3. S. sobrinus의 성장률은 0.01 mmol/L 농도의 HEMA, UDMA와 0.005 mnol/L, 0.01 mmol/L 농도의 Camphoroquinone에서 대조군에 비하여 유의할만하게 감소되었다. 4. S. sobrinus의 성장률은 0.001, 0.01, 0.03 mmol/L농도에서 대조군에 비하여 유의할만한 감소를 보였으며 각 실험군들 간에도 통계학적으로 유의 할만한 차이를 보였다. 이상의 결과를 종합하면 레진 모노머를 적용한 모든 군에서 적용하지 않은 양성 대조군에 비해 두세균의 증식률이 감소되었으며, 세균의 성장을 촉진하지 않는 것으로 사료된다.

• 대한화학회지
• /
• 제62권2호
• /
• pp.93-98
• /
• 2018

Bis-GMA, TEGDMA, and camphorquinone were used as the main material, cross-linking agent, and photoinitiator, respectively. In addition, 2-isocyanatoethyl methacrylate was used as an additive for high strength, while the 3-hydroxypyridine was used as an additive for antibacterial activity. Photopolymerization was also carried out at a 440-480 nm wavelength and at about $1000mW/cm^2$ intensity for about 40 seconds. The breaking strength measurement of the samples showed that the breaking strength increased along with increasing the addition ratio of IEM, while it took less time until the polymerization was complete, thereby suggesting that the degree of polymerization has the tendency to increase. And also, compared to the size of the clear zone formed by ampicillin, the 3-hydroxypyridine group exhibited antimicrobial activity induced by ampicillin. The results of this study suggest that the use of 2-isocyanatoethyl methacrylate as an additive for high strength and 3-hydroxypyridine as an additive for improved antibacterial activity would improve the usability of the fabricated polymer as a dental resin cement material with high functionality.

• Restorative Dentistry and Endodontics
• /
• 제36권4호
• /
• pp.313-323
• /
• 2011

연구목적: 여러 가지 문제점을 가지고 있는 기존의 중합개시제인 CQ와 새로운 개시제인 p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate (OPPI), 중합촉진제인 지방족 아민(DMAEMA)을 포함한 3종 중합개시시스템을 함유한 레진 모노머의 중합전환률을 증진시키기 위한 각각의 조성 비율을 알아보고 중합개시제와 중합촉진제의 비율에 따른 영향을 분석하고자 하였다. 연구 재료 및 방법: BisGMA/BisEMA/TEGDMA 조성의 레진 모노머를 제조한 다음 다양한 농도 조합의 CQ, OPPI, DMAEMA를 혼합하였다. 각각의 물질을 0.2 wt.% (저농도, L), 1.0 wt.% (중간농도, M), 2.0 wt.% (고농도, H)의 3가지 농도로 혼합하였으며, 그 농도 비율에 따라 9개의 실험군으로 제작하였다: LLL, LMM, LHH, MLM, MMH, MHL, HLH, HML, HHM (CQ-OPPI-DMAEMA의 농도) 중합 시스템이 함유된 각각의 레진 모노머를 NaCl disk에 압착한 다음 Demetron 400 광중합기를 이용하여 5초, 20초, 40초, 60초, 300초 동안 광중합 하였으며, FTIR로 전환률(Degree of Conversion, DC)을 측정하였다. 조성비율은 ANOVA와 Duncan 사후검정법을 이용하였으며 중합개시제와 중합촉진제의 비율이 같은 실험군들의 상호비교에는 T-검정도 시행하였다. 결과: 중합개시시스템을 이루는 조성들의 농도 조합에 따라 중합전환률의 차이를 보였으며, MMH 군과 HHM 군이 높은 초기 중합전환률을 보였다. 중합개시제(CQ, OPPI)와 중합촉진제인 DMAEMA의 비율에 따른 중합전환률의 차이를 보이지 않았으며, CQ의 농도는 전환률에 영향을 주지 않은 반면, OPPI의 농도는 전환률에 영향을 미쳤다. 결론: 중합전환률이 높으며 밝은 색상이 필요한 경우에는 MMH 조합을, 짙거나 불투명한 경우에는 MMH 조합이 추천된다.