• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.109-116
• /
• 1988

In this paper, principles of impedance tenchinque and relationship between stroke volume and impedance change were theoretically explained. An impedance cardiograph was designed and constructed. Its reproducibility was verified by experiment. Until now, the peak point of dZ/dt waveform, first derivative of impedance change(${\Delta}$Z) , has been detected by software technique requiring considerable time to process. However in this paper its peak point was found using hardware for saving processing time. Useful cardiac parameters such as stroke volume and contractility of cardiac muscle were measured noninvasively. The reproducibility of the instrument was measured to be better(less than 10%) than that of clinical standard method such as thermodilution (more than 30%). Hence impedance cardiography was found to be better techique for monitoring stroke volume and myocardial contractility for pre and post operation, and pharmacological studies.

• Journal of Sensor Science and Technology
• /
• v.15 no.6
• /
• pp.449-456
• /
• 2006

The purpose of urodynamic investigation is to obtain the information on the function of the urinary system. The aim of this study is to acquire the useful information of lower urinary tract symptom (LUTS) diagnosis through void force signal as noninvasive method. The system which could evaluate the function of compensatory hypertrophy with noninvasive and comfortable method was implemented to measure uroflow and void force during urination. The implemented system composes of the sensor parts, signal conditioning parts and PC monitoring program. For the evaluation of the implemented system, the simulation of control part of the system was performed and the model system for the lower urinary system was designed. The superiority of a measuring characteristic of the implemented system was verified using the model system. From the evaluation of the model system, we have found out that the void force was dependent on the occlusion degree and compensatory hypertrophy significantly.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.521-525
• /
• 2014

Circulating tumor cells (CTCs) in the bloodstream of cancer patients provide an accessible source for detection, characterization, and monitoring of nonhematological cancers. The effectiveness of the CTC-Chip for the isolation of ovarian cancer cells was demonstrated by adapting the herringbone-chip (HB-Chip). The motions of the particles on the HB chip were simulated by a unique combination of buoyant, gravitational forces, and helical flows with a computational modeling. The motions of cells are demonstrated by applying polystylene bead and ovarian cancer cells into the microfabricated HB-Chip. The experimental results from beads and cells are well accordance with the simulated ones, as previously reported by Toner group. Thus, I expect that these modeling and experimental skills will play key roles in the clinical applications on CTC isolation as well as the basic research on characterization of CTCs under flow.

• Journal of the Optical Society of Korea
• /
• v.10 no.2
• /
• pp.91-95
• /
• 2006

Blood pressure was predicted from photoplethysmography (PPG). To obtain PPG, backscattered light from a fingertip was measured and its waveform was analyzed. Systolic upstroke time and diastolic time in the pulse waveform were used as parameters to predict blood pressure. The experiment was carried out with five subjects on five different days. The systolic upstroke time had a correlation coefficient of -0.605 with respect to systolic blood pressure and the diastolic time had a correlation coefficients of -0.764 for diastolic pressure. This PPG method does not require an air-cuff installation on the arm and can predict blood pressure continuously. This simple LED/photo detector setup can be a good candidate for nonconstrained monitoring of blood pressure variations.

• Journal of Biomedical Engineering Research
• /
• v.6 no.1
• /
• pp.5-12
• /
• 1985

In this paper Kalman filtering technique is applied to ultrasound signal to improve resolution capability, Ivhlch is in use of diagnostic imaging systems. The main advantage of Kalman filter algorithm for the analysis of reflected ultrasound signal is its recursive structure which can be easily adapted to tlme varing system. Because soft-tissues, such as liver, act as distributed acoustic low-pass filters which continually change the propagating pulse. tIne can put to practical use above advantage to find a suitable signal generallng model. In state-space description of the system, the 6th order system produces tl)e 1)esc spectral approximation to the source pulse As a result of spectrum analysis, 6th order estimator for two closely spaced ((p.5 mm) reflectors enhances resolution by 4dB-lOdB. By using this result, the possibility to detect even minute tumor is demonstrated.

• YAKHAK HOEJI
• /
• v.60 no.1
• /
• pp.15-20
• /
• 2016

Globotriaosylsphingosine (lyso Gb3) is considered as one of the biomarkers for Fabry disease. A rapid and simple UPLC-MS/MS method was developed for the determination of reliable biomarker, lyso Gb3. Total analytical procedure takes only 15 min including sample preparation and MS/MS analysis. Limit of detection was 0.85 ng/ml (S/N=3). The calibration curve was linear over the range of 2.0~400.0 ng/ml ($R^2=0.9999$). Inter-day and intra-day assay accuracy were 93.4~100.6% (RSD, 0.6~6.0%) and 97.5~100.7% (RSD, 3.6~5.2%). Absolute recoveries of 97.6~98.6 showed excellence of a new analytical method. The method was applied to human and mice urines, proved the suitability for the quantification of lyso-Gb3 for screening, diagnosis and therapeutic monitoring of Fabry disease patients.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1474-1478
• /
• 2010

An efficient method for labeling individual proteins in live cells is required for investigations into biological mechanisms and cellular processes. Here we describe the preparation of small quantum dots (QDs) that target membrane surface proteins bearing a hexahistidine-tag ($His_6$-tag) via specific binding to an nitrilotriacetic acid complex of nickel(II) ($NTA{\cdot}Ni^{2+}$) on the QD surfaces. We showed that the $NTA{\cdot}Ni^{2+}$-QDs bound to His-tag functionalized beads as a cellular mimic with high specificity and that QDs successfully targeted $His_6$-tagged vesicle-associated membrane proteins (VMAP) on cell surfaces. This strategy provides an efficient approach to monitoring synaptic protein dynamics in spatially restricted and confined biological environments.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.93-94
• /
• 2007

노약자 활동상황 감시에서 활동정보와 위치정보는 매우 중요하다. 본 논문에서는 3축 가속도센서와 ZigBee 통신을 이용하여 노약자 활동상황 감시를 위한 시스템을 개발하였다. 가속도센서로부터 활동량을 측정하고 운동량을 계산하기 위한 걸음 검출을 하며, ZigBee 통신을 이용하여 감시시스템으로 전송하여 실시간으로 노약자의 활동상황을 모니터링 할 수 있다. 추가로 부착위치에 강인한 걸음 검출 알고리즘을 제안하였으며, 실제 실험을 통해 가속도센서를 가슴에 부착할 경우 99.83%의 정확도로 걸음을 검출할 수 있음을 확인하였다. 또한 ZigBee 통신의 수신신호세기를 이용하여 노약자가 있는 방을 구별할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.469-470
• /
• 2007

In this paper, we propose a simple and relative electrode contact monitoring method. By exploiting the power line interference, which is regarded as one of the worst noise sources for bio-potential measurement, the relative difference in electrode impedance can be measured without a current or voltage source. Substantial benefits, including no extra circuit components, no degradation of the body potential driving circuit, and no electrical safety problem, can be achieved using this method. Furthermore, this method can be applied to multi-channel isolated bio-potential measurement systems and home health care devices under a steady measuring environment.

• Journal of Semiconductor Engineering
• /
• v.1 no.1
• /
• pp.46-56
• /
• 2020

This article highlights new opportunities of inorganic semiconductor materials for bio-implantable electronics, as a subset of 'transient' technology defined by an ability to physically dissolve, chemically degrade, or disintegrate in a controlled manner. Concepts of foundational materials for this area of technology with historical background start with the dissolution chemistry and reaction kinetics associated with hydrolysis of nanoscale silicon surface as a function of temperature and pH level. The following section covers biocompatibility of silicon, including related other semiconductor materials. Recent transient demonstrations of components and device levels for bioresorbable implantation enable the future direction of the transient electronics, as temporary implanters and other medical devices that provide important diagnosis and precisely personalized therapies. A final section outlines recent bioresorbable applications for sensing various biophysical parameters, monitoring electrophysiological activities, and delivering therapeutic signals in a programmed manner.