• Fisheries and Aquatic Sciences
• /
• v.25 no.6
• /
• pp.311-319
• /
• 2022

Hyaluronic acid from Liparis tessellatus eggs (HALTE) was grafted with caffeic acid (CA-g-HALTE), ferulic acid (FA-g-HALTE), gallic acid (GA-g-HALTE), and nisin (Nisin-g-HALTE) and investigated for their anti-inflammatory and antioxidant potential in lipopolysaccharides-stimulated RAW 264.7 mouse macrophages. Nitric oxide (NO) generation and prostaglandin E₂ activity were measured after treatment with the grafted HALTE samples. All grafted HALTE samples exhibited more antioxidant activity against 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radicals than 2,2-diphenyl-1-picrylhydrazyl radicals. Nisin-g-HALTE showed the least antioxidant activity. Additionally, the NO assay results showed that all grafted samples had no cytotoxic effect on RAW 264.7 macrophages and reduced macrophage activity after treatment. The most effective concentrations of CA-g-HALTE and FA-g-HALTE were found to be above 100 ㎍/mL. Increased sample concentration resulted in increased activity except with Nisin-gHALTE at 100 ㎍/mL. CA-g-HALTE, FA-g-HALTE, GA-g-HALTE, and Nisin-g-HALTE were found to have antioxidant and anti-inflammatory potential, which can be further explored for use in food, cosmetic, nutraceutical, and biomedical applications.

• BMB Reports
• /
• v.55 no.6
• /
• pp.251-258
• /
• 2022

Innovative genome editing techniques developed in recent decades have revolutionized the biomedical research field. Liver is the most favored target organ for genome editing owing to its ability to regenerate. The regenerative capacity of the liver enables ex vivo gene editing in which the mutated gene in hepatocytes isolated from the animal model of genetic disease is repaired. The edited hepatocytes are injected back into the animal to mitigate the disease. Furthermore, the liver is considered as the easiest target organ for gene editing as it absorbs almost all foreign molecules. The mRNA vaccines, which have been developed to manage the COVID-19 pandemic, have provided a novel gene editing strategy using Cas mRNA. A single injection of gene editing components with Cas mRNA is reported to be efficient in the treatment of patients with genetic liver diseases. In this review, we first discuss previously reported gene editing tools and cases managed using them, as well as liver diseases caused by genetic mutations. Next, we summarize the recent successes of ex vivo and in vivo gene editing approaches in ameliorating liver diseases in animals and humans.

• Journal of Biomedical Engineering Research
• /
• v.44 no.4
• /
• pp.264-274
• /
• 2023

Purpose: The objective is to extract insights that can contribute to the formulation of harmonized international policies and support measures for innovative medical devices and management systems. This study aims to propose effective strategies for future medical device innovation and healthcare delivery. Results: It investigates technological advancements, regulatory approval systems, insurance policies, and successful commercialization cases in South Korea, the United States, and the European Union. In 2018, the FDA implemented insurance coverage for Software as a Medical Device (SaMD) and recognized insurance coverage for Digital Therapeutics (DTx). Germany is a country that ensures permanent reimbursement for healthcare applications since 2020, making it the first country to provide legal health insurance coverage for fostering a digital ecosystem. Conclusion: The findings of this research highlight the importance of cultivating a supportive regulatory and environmental framework to facilitate the adoption of innovative medical devices. Continuous support for research and development (R&D) efforts by companies, along with the validation of clinical effectiveness, is crucial.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.6 no.2
• /
• pp.171-176
• /
• 2020

Covalent organic frameworks (COFs) are porous crystalline polymers in which organic units are linked by covalent bonds and have a regular arrangement at the atomic level. Recently, the COFs have been much attention in bio-medical area such as bio-imaging, drug delivery, and therapeutics. These 2D nanoparticles are proving their value in nanomedicine due to their large surface area, functionalization through functional groups exposed on the surface, chemical stability due to covalent bonding, and high biocompatibility. The high ω-electron density and crystallinity of COFs makes it a promising candidate for bioimaging probes, and its porosity and large surface area make it possible to be utilized as a drug delivery vehicle. However, the low dispersibility in water, the cytotoxicity problems of COFs are still challenged to be solved in the future. In this regard, several efforts that increase the degree of dispersion through functionalization on the surface of COFs for the application to the biomedical field have been reported. In this review, we would like to describe the advantages and limitations of COFs for bio-imaging and anti-cancer treatment.

• Communications for Statistical Applications and Methods
• /
• v.30 no.3
• /
• pp.291-309
• /
• 2023

Longitudinal count data has been widely collected in biomedical research, public health, and clinical trials. These repeated measurements over time on the same subjects need to account for an appropriate dependency. The Poisson regression model is the first choice to model the expected count of interest, however, this may not be an appropriate when data exhibit over-dispersion or under-dispersion. Recently, Conway-Maxwell-Poisson (CMP) distribution is popularly used as the distribution offers a flexibility to capture a wide range of dispersion in the data. In this article, we propose a Bayesian CMP regression model to accommodate over and under-dispersion in modeling longitudinal count data. Specifically, we develop a regression model with random intercept and slope to capture subject heterogeneity and estimate covariate effects to be different across subjects. We implement a Bayesian computation via Hamiltonian MCMC (HMCMC) algorithm for posterior sampling. We then compute Bayesian model assessment measures for model comparison. Simulation studies are conducted to assess the accuracy and effectiveness of our methodology. The usefulness of the proposed methodology is demonstrated by a well-known example of epilepsy data.

• Journal of Biomedical Engineering Research
• /
• v.44 no.5
• /
• pp.324-328
• /
• 2023

Excessive inflammation in the body causes immune cells to release cytokines that damage normal tissues and cells, leading to rheumatoid arthritis and sepsis. Pulsed magnetic field(PMF) stimulation has many applications in the treatment of neurological, muscular disorders and pain. Therefore, in this study, we aim to investigate the effect of PMF stimulation on the regulation of excessive inflammation in the overall immune system. Macrophages, a primary immune cell, and T cells, a secondary immune cell, were co-cultured in the insert wells under the same conditions, and then inflammation was artificially induced. The changes in inflammatory activity following PMF stimulation were measured by pH and IL-6 concentration. After inflammation induction, both cells became more acidic and increased IL-6 expression, but after PMF stimulation, we observed improved acidification of macrophages and T cells and decreased IL-6 expression. Our results showed that infected macrophages activated T cells and that the recovery of excessive inflammatory response regulation after PMF stimulation proceeded more rapidly in macrophages. Therefore, this study suggests that PMF has a positive anti-inflammatory effect on the overall immune system and thus has the potential to be used as a non-invasive therapy for the treatment of chronic inflammatory diseases.

• Journal of Sensor Science and Technology
• /
• v.33 no.1
• /
• pp.7-11
• /
• 2024

Soft-pressure sensors have numerous applications in soft robotics, biomedical devices, and wearable smart devices. Herein, we present a highly sensitive electronic skin device with an isotropic wrinkled pressure sensor. A conductive ink for soft pressure sensors is produced by a solution process using polydimethylsiloxane (PDMS), poly 3-hexylthiophene (P3HT), carbon black, and chloroform as the solvents. P3HT provides high reproducibility and conductivity by improving the ink dispersibility. The conductivity of the ink is optimized by adjusting the composition of the carbon black and PDMS. Soft lithography is used to fabricate a conductive elastic structure with an isotropic wrinkled structure. Two conductive elastic structures with an isotropic wrinkle structure is stacked to develop a pressure sensor, and it is confirmed that the isotropic wrinkle structure is more sensitive to pressure than when two elastic structures with an anisotropic wrinkle structure are overlapped. Specifically, the pressure sensor fabricated with an isotropic wrinkled structure can detect extremely low pressures (1.25 Pa). Additionally, the sensor has a high sensitivity of 15.547 kpa^-1 from 1.25 to 2500 Pa and a linear sensitivity of 5.15 kPa^-1 from 2500 Pa to 25 kPa.

• Corrosion Science and Technology
• /
• v.23 no.3
• /
• pp.179-194
• /
• 2024

A layer-by-layer coating was produced using electrophoretic deposition for a HA/Al₂O₃ coating layer and a bioglass coating layer on Co-Cr-Mo alloy with a roughness of 0.5 ㎛ (400 emery paper SiC). The corrosion behaviour was analyzed by assessing the coating layers' exceptional corrosion resistance, which outperformed the substrate. Cr ion release test using AAS was carried out, indicating that factional graded coating inhibited ion release from the uncoated substrate to coated sample. The porosity was expressed as a percentage, representing the extent of imperfections on the surface of all coatings. These imperfections fell within an acceptable range of 1% to 3%. The roughness of the coated surface was measured using atomic force microscopy, which revealed an excellent roughness value of 3.32 nm. Tape test technique for adhesion revealed that the removal area of the substrate coating layer varied by 11.92%. X-ray diffraction analysis confirmed the presence of all coating material peaks and verified phases of the deposited coating layers. These findings provided evidence that the coating composition remains unaffected by the electrophoretic deposition process. The bioactivity was assessed by immersion in a simulated bodily fluid, which revealed the formation of HCA during a period of 5 days.

• Journal of Marine Bioscience and Biotechnology
• /
• v.16 no.1
• /
• pp.26-35
• /
• 2024

Chlorella has various biotechnological applications, including in the biomedical and pharmaceutical industries, because of its advantages, including rich nutrients, fast growth rate, easy cultivation, and high biomass. We used the Agrobacterium-mediated transformation method to express human GM-CSF and EGF proteins, which are widely used in regenerative medicine, cosmetics, and pharmaceutical materials in Chlorella. The codon-optimized hGM-CSF and hEGF genes were cloned into plant binary vectors and transformed into Chlorella vulgaris using the Agrobacterium-mediated coculture transformation method. After transformation, genomic DNA PCR was performed for each C. vulgaris line that was stably subcultured on an antibiotic-resistant solid medium to confirm the insertion of hGM-CSF and hEGF into the chromosome. Furthermore, PT-PCR and protein expression of hGM-CSF and hEGF in each transformed C. vulgaris were significantly increased compared to the untransformed Chlorella. This study suggests that high-value proteins, including hGM-CSF and hEGF, which are foreign genes of C. vulgaris, can be stably expressed through the Agrobacterium-mediated Chlorella transformation system.

• Analytical Science and Technology
• /
• v.37 no.4
• /
• pp.201-210
• /
• 2024

Surface-enhanced Raman scattering (SERS) has emerged as a powerful technique for detecting and analyzing chemical and biological molecules at ultra-low concentrations. The effectiveness of SERS largely depends on structures with sub-10 nm gaps, prompting the proposal of various nanostructures as efficient SERS-active platforms. Among these, single-crystalline gold nanowires (AuNWs) are particularly promising due to their large dielectric constants, well-defined geometries, atomically smooth surfaces, and surface plasmon resonance across the visible spectrum, which produce strong SERS enhancements. This review comprehensively explores the synthesis, functionalization, and application of Au NWs in SERS. We discuss various methods for synthesizing AuNWs, including the vapor transport method, which influences their morphological and optical properties. We also review practical applications in chemical and biosensing, showcasing the adaptability of Au NWs-based SERS platforms in detecting a range of analytes, from environmental pollutants to biological markers. The review concludes with a discussion on future perspectives that aim to enhance sensor performance and broaden application domains, highlighting the potential of these sensors to revolutionize diagnostics and environmental monitoring. This review underscores the transformative impact of AuNW-based SERS sensors in analytical chemistry, environmental science, and biomedical diagnostics, paving the way for next-generation sensing technologies.