• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.221-227
• /
• 2010

In this study, we consider gas generation characteristics on pyrolysis of eco-fuel which were made by mixing of Pitch Pine and Lauan sawdust as biomass and polyethylene, polypropylene, polystyrene as municipal plastic wastes with catalyst in fixed bed reactor. From the result of higher heating value(HHV) measurement and of ultimate analysis, the heating value of plastic wastes and a hydrogen content in plastic sample are higher than biomass. An activation energy was reduced by a catalyst addition. However the catalyst content influence over 5 wt% was insignificant. The yield of hydrogen from gasification of biomass containing plastic wastes such as polyethylene, polypropylene and polystyrene were obtained higher than that of sole biomass. The high temperature and mixture ratio of catalyst conditions induced to high hydrogen yield in most of the samples. As the influence of catalyst, the hydrogen yield by catalytic reaction was higher than non-catalytic reaction. We confirmed that Ni-$ZrO_2$ catalyst is more active in increasing the hydrogen yield in comparison with that of carbonate catalyst. The maximum hydrogen yield was 65.9 vol.%(Pitch Pine / polypropylene / 20 wt.% Ni-$ZrO_2$(1:9) at $900^{\circ}C$).

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.94-104
• /
• 2009

It is urgently required to develop the production of fermentation-heat energy from the waste agricultural and forest biomass and its effective heat exchanging system for the supply of warm water to rural households and greenhouses. In this study 3 helical-type and 1 plate-type heat exchangers using 3 different waste biomasses [e.g. hardwood (HW) sawdust (100%), softwood (SW) sawdust : HW sawdust (50 : 50) and HW sawdust : grass (90 : 10)] were applied in order to find out the best heat recovery system. The heat exchanger was basically considered to improve the overall heat recovery efficiency, to minimize heat loss and to simplify manufacturing, assembling and breaking up the fermenting beds. The helical-type heat exchanger (HX-H3) installed in fermenting bed of HW sawdust : grass (90 : 10) showed relatively higher temperature profiles, in particular mid- and upper-parts than lower and surface parts during 45-day fermentation process. The maximum temperature was ranged from $40^{\circ}C$ to $65^{\circ}C$ with average $60^{\circ}C$. The water temperature of tank outlet was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. By the way plate-type one (HX-P) installed in same biomass compositional fermenting bed showed $64.5{\sim}76.5^{\circ}C$ at center part, and $43{\sim}56^{\circ}C$ and $42{\sim}58^{\circ}C$, water tank and tank outlet temperatures, respectively, during 100 day measurement. It could be concluded that the plate-type heat exchanger (HX-P) provides not only the effective heating for the rural households and greenhouses, but also having the best heat recovery performance, easy manufacturing, assembling and breaking up the systems.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2014

When processing the biomass by Hydrothermal carbonization (HTC), a slow pyrolysis process, it produces bio-gas, biooil, and biochar. Among these end products, biochar is known for isolating or storing carbon and being used as a soil amendment. In this study, the characteristics of biochar generated by HTC at $250^{\circ}C$ for 1 hour, 2 hours, 3 hours, and 20 hours with synthetic food wastes and wood wastes were analyzed for potential uses in soil contaminated with heavy metals. The yield of biochar (weight %) increased when the ratio of wood wastes increased and showed a decreasing tendency as reaction time increased. Elemental analysis of biochar based on various conditions showed a maximum of 70% carbon (C) content. The carbon content showed an increasing tendency with the increase of wood wastes. Iodine adsorption test was peformed to determine the optimum reaction condition, which was 15% wood waste for mixing ratio and 2 hours for reaction time. Using biochar generated at the optimum condition, its capability of adsorbing heavy metals (Cd, Cu, Pb, Zn, Ni) was evaluated. It was concluded that lead (Pb) was removed efficiently while zinc (Zn) and nickel (Ni) were hardly adsorbed by biochar.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.55-63
• /
• 2001

Populus euramericana and Betula platyphylla var. japonica have been identified as possible species for use for phytoremediation of landfills. To identify the effects of waste leachate on growth and physiological characteristics in Populus euramericana and Betula platyphylla var. japonica, four different treatments were applied to seedlings for 3 months: leachate solution(100% leachate), 50% dilution(50% leachate: 50% water, v/v), 75% dilution(25% leachate: 75% water, v/v) and control(tab water) were applied to these two species. Treatment with waste leachate significantly stimulated both Populus euramericana and Betula platyphylla var. japonica height, diameter at root collar and biomass production relative to the water control. Chlorophyll contents, photosynthesis and transpiration of leachate irrigated-trees were significantly higher than those of water control. These results suggested that these two species could be suitable species for phytoremediation in landfills because these species showed good growth performance and were capable of taking up waste leachate.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.587-599
• /
• 2018

The coffee grounds generated during the coffee extraction process contain several resources, but the technology for their recycling has not been commercialized yet, causing various environmental problems. Due to the recent increase in coffee consumption worldwide, the amount of coffee grounds produced has been continuously increasing, reaching more than 750 million tons. In Korea, about 120,000 tons of coffee waste are annually generated; however, most of them are landfilled or incinerated. Although there is still a shortage of coffee waste recycling technologies compared to the amount of coffee grounds produced, various recycling approaches are being actuated in many countries including Korea. In this study, the generation of coffee grounds at home and abroad, the status of coffee grounds recycling, and the associated technology development trends were investigated. The coffee grounds recycling has been studied in the fields of energy, adsorbent, construction, agriculture, and bio-foods. Research is most active in the energy and biotechnology areas; in particular, since the oil in the coffee grounds is valuable as a feedstock for biomass energy, the technology related to energy recovery is currently under development worldwide. Removed because confusing and unnecessary.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.734-741
• /
• 2001

The two-month-old rooted-cuttings of Populus alba ${\times}$ glandulosa, P. euramericana and P. nigra ${\times}$ maximowiczii clones were exposed to livestock waste water - one of major water pollutants, and ground water in order to determine the effects of livestock waste water on growth response and absorption capacity of the species. For this purpose, 5 clones of each species were used. In all the species, the height growth of rooted-cuttings was better in livestock waste water treatment than in ground water. Of all the poplar species compared, the height growth was best in P. alba ${\times}$ glandulosa. In the cases of P. euramericana and P. nigra ${\times}$ maximowiczii, the height growth in the livestock waste water treatment was statistically different among clones, whereas there was no significant difference among P. alba ${\times}$ glandulosa clones. Aboveground biomass such as leaf and shoot dry weight of all the species increased in the livestock waste water treatment, while root dry weight decreased. In addition, chlorophyll contents in leaf of all the poplar species increased in the livestock waste water treatment. All the poplar trees showed temporal variation in the absorption amount of livestock waste water during the experimental period. In all the poplar species, the absorption amount of livestock waste water was less than that of ground water. Of 3 poplar species, P. alba ${\times}$ glandulosa was best in the absorption capacity of livestock waste water. Of all 15 poplar clones compared in this study, the 72-16 clone of P. alba ${\times}$ glandulosa showed the best absorption capacity.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.1
• /
• pp.52-64
• /
• 2002

유기성 폐기물을 이용하여 생물학적 수소생산 통합화 시스템 연구를 수행하였다. 통합화 시스템은 유기성폐기물의 전처리, 2단계 혐기발효 및 광합성 배양으로 구성된 생물학적 수소생산 공정, 초임계수 가스화 공정, 생산된 가스의 저장, 분리 및 연료전지를 이용한 전력 생산으로 구성되었다. 실험에 사용된 유기성 폐자원은 식품공장 폐수, 과일폐기물, 하수슬러지이며, 전처리는 폐기물에 따라 열처리 및 물리적 처리를 하였으며, 전처리된 시료는 생물학적 수소생산 공정에 직접 적용되었다. Clostridium butyricum 및 메탄 생성조에서 발생하는 하수슬러지중의 미생물 복합체는 수소생산 혐기 발효공정에 사용되었으며, 광합성 수소생산 미생물인 홍색 비유황 세균은 광합성 배양에 사용되었다. 생물학적 공정에서 발생하는 미생물 슬러지는 초임계수 가스화 공정으로 수소를 발생하였으며, 슬러지 중의 COD를 저하시켰다. 생물학적 공정 및 초임계수 가스화 공정에서 발생하는 수소는 가스탱크에 가입상태로 저장한 후, 95%순도로 분리하였으며, 정제된 수소는 연료전지에 연결하여 전력 생산을 하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.6
• /
• pp.538-544
• /
• 2014

A traditional fireplace has been used, but not much, for heating and cooking in rural area, Korea. Traditional fireplace as one type of biomass burnings is also emitting various air pollutants. Air pollutants emission from traditional fireplace was estimated in this study. There are two types of traditional fireplace, one for combined heating and cooking, the other one for cooking only. Types of fuels mostly used in traditional fireplace were wood, agricultural residue, solid waste. Activity levels such as fuel types, amount of fuel loading, and temporal variation were investigated by field survey over Korea. Estimated annual emissions from traditional fireplace were CO 6,335.0, NOx 555.0, SOx 9.6, VOC 1,771.7, TSP 181.4, $PM_{10}$ 119.9, $PM_{2.5}$ 96.2, $NH_3$ 1.4 ton/yr respectively. When emissions compared with the national emission inventory (CAPSS: Clean Air Policy Support System) of 2010 year, CO and $PM_{10}$ occupy 0.8% and 0.1% of total national emission, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.763-766
• /
• 2007

국내에서 발생되는 고형폐기물 중 자원으로 재활용 가능한 유기성폐기물은 하수슬러지, 음식물류폐기물, 축산분뇨 등을 대표 할 수 있다. 이들 유기성폐기물은 환경적인 측면에서 볼 때 다른 유기성 폐수 및 폐기물에 비하여 오염부하량이 상대적으로 높지만, 이를 생물자원 (Biomass)으로 인식하고 이용 할 경우 지구온난화와 같은 환경문제 뿐만아니라 향후 자원고갈문제를 동시에 해결할 수 있는 대체에너지 자원이다. 유기성폐기물을 대체에너지 자원으로 효율적으로 이용하기 위해서는 우선적으로 국제적 환경규제와 에너지 정책에 능동적으로 대응할 수 있는 자원순환형 폐기물관리 시스템 구축이 필요하며, 이를 위한 체계적인 정책적 지원책과 기술 개발이 뒷받침 되어야 할 것이다. 자원 재활용과 에너지회수 기술에 있어 혐기성소화(anaerobic digestion)는 유기성폐기물의 효과적인 감량화, 재이용화, 안정화를 만족시키는 동시에 유용 에너지원인 메탄가스를 회수할 수 있는 바이오가스 전환기술로 최근에 주목을 받는 biotechnology 중의 하나로 자리매김 하고 있다. 특히, 소비자원의 대부분이 해외에 의존하는 국내현실과 최근 고유가에 따른 국가 에너지 정책을 제고해야하는 현 시점에서 유기성폐기물을 이용한 바이오가스화 기술을 널리 보급하기 위해서는 요소기술 개발과 정부의 적극적인 정책적 지원 방안이 마련되어야 할 것이다.

• Environmental Engineering Research
• /
• v.17 no.3
• /
• pp.125-132
• /
• 2012

The removal of Cd(II) and Cu(II) from aqueous solution by an agricultural solid waste biomass prepared from Moringa oleifera bark (MOB) was investigated. The biosorbent was characterized by Fourier transform infrared spectroscopy and elemental analysis. Furthermore, the effect of initial pH, contact time, biosorbent dosage, initial metal ion concentration and temperature on the biosorption of Cd(II) and Cu(II) were studied using the batch sorption technique. Kinetic studies indicated that the biosorption process of the metal ions followed the pseudo-second order model. The biosorption data was analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models. Based on the Langmuir isotherm, the maximum biosorption capacities for Cd(II) and Cu(II) onto MOB were 39.41 and 36.59 mg/g at 323 K, respectively. The thermodynamic parameters, Gibbs free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$), and entropy (${\Delta}S^o$) changes, were also calculated, and the values indicated that the biosorption process was endothermic, spontaneous and feasible in the temperature range of 303-323 K. It was concluded that MOB powder can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Cd(II) and Cu(II) ions from aqueous solution.