• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2019.10a
• /
• pp.134-134
• /
• 2019

Utilization of organic waste as a renewable energy source is promising for sustainability and mitigation of climate change. Pyrolysis converts organic waste to gas, oil, and biochar by incomplete biomass combustion. Biochar is widely used as a soil conditioner and adsorbent. Biochar adsorbs/desorbs metals and ions depending on the soil environment and condition to act as a nutrient buffer in soils. Biochar is also regarded as a carbon storage by fixation of organic carbon. Phosphorus (P) and nitrogen (N) are strictly controlled in many wastewater treatment plants because it causes eutrophication in water bodies. P and N is removed by biological and chemical methods in wastewater treatment plants and transferred to sludge for disposal. On the other hand, P is an irreplaceable essential element for all living organisms and its resource (phosphate rock) is estimated about 100 years of economical mining. Therefore, P and N recovery from waste and wastewater is a critical issue for sustainable human society. For the purpose, intensive researches have been carried out to remove and recover P and N from waste and wastewater. Previous studies have shown that biochars can adsorb and desorbed phosphates implying that biochars could be a complementary fertilizer. However, most of the conventional biochar have limited capacity to adsorb phosphates and nitrate. Recent studies have focused on biochar impregnated with metal salts to improve phosphates and nitrate adsorption by synthesizing biochars with novel structures and surface properties. Metal salts and metal oxides have been used for the surface modification of biochars. If P removal is the only concern, P adsorption kinetics and capacity are the only important factors. If both of P and N removal and the application of recovery are concerned, however, P and N desorption characteristics and bioavailability are also critical factors to be considered. Most of the researches on impregnated biochars have focused on P removal efficiency and kinetics. In this study, coffee waste is thermally treated to produce biochar and it was impregnated with Mg/Al to enhance phosphates and nitrate adsorption/desorption and P bioavailability to increase its value as a fertilizer. Kinetics of phosphates and nitrate adsorption/desorption and bioavailability analysis were carried out to estimate its potential as a P and N removal adsorbent in wasewater and a fertilizer in soil.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.5
• /
• pp.321-333
• /
• 2013

As environmental sustainability becomes a key consideration in policy-making, more responsible consumption and utilization in daily life concern both health and quality of life. To address inequities in health in relation to environments, waste management has taken more progressive ways, and one of them is biomass-to-energy conversion that utilizes energy recovery from food waste. By extension, a food waste zero-emission system using fermentation and extinction technology gains much attention, so that this study is designed to examine residents' attitudes toward recycling food waste produced at home and toward food waste zero-emission system. Utilizing a survey questionnaire, this research collected data from 400 individual units of multifamily housing estates nationwide, and the data were analyzed using descriptive and inferential statistics. The findings indicate that food waste generated at home was highly water-contained and produced in the stage of food preparation before cooking while respondents viewed that food waste collection and treatment needed to be improved. It's noted that respondents strongly supported the use of food waste as a energy source and would have the use of the food waste zero-emission system built in kitchen sink. Regression analysis showed that educational attainment of housewives, cooking style, and planning food purchase were statistically significant factors in the attitude of the responded residents toward recycling food waste while none of the factors were in the attitude toward the food waste zero-emission system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.1
• /
• pp.36-42
• /
• 2003

To identify the rapacity of waste leachate absorption in Populus euramericana and Betula platyphylla var, japonica, four different treatments were applied to seedlings: leachate solution (100% leachate), 50% dilution (50% leachate: 50% water, v/v) and 25% dilution, (25% leachate: 75% water, v/v) were applied to these two species. After the experiment, concentrations of heavy metals in tree parts were analyzed by an Inductively Coupled Plasma emission spectrometer (ICP). treatment with waste leachate significantly stimulated both Populus euramericana and Betula platyphylla var. japonica biomass production relative to the water control. In addition, these species showed good absorption capacity of As, Co, Hg and Ni elements. The results of this study suggested that these two species can absorb the toxic materials through their roots and transport them to stems or leaves.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.179.2-179.2
• /
• 2011

바이오매스 가스화 프로세스 개발에 있어서 가장 기본적인 해결과제는 고발열량의 합성가스 제조, 냉가스 효율의 향상, 타르 발생량 저감 및 제거이다. 가스화 효율 향상에 대한 연구는 국내외 적으로 많이 이루어지고 있으나, 타르 발생량 저감에 대한 연구는 많이 이루어져 있지 않다. 타르는 분자량이 큰 방향적 탄화수소로 응축되면 점성이 높아 배관폐쇄, 정제설비의 압력손실 증가로 인해 운전정지 및 가스화율 저하의 원인이 된다. 가스화로에서 타르 발생량을 저감시키는 방법 중에는 Ni계 촉매를 이용하는 방법이 있으나, 카본 누적에 의한 활성저하, 알칼리금속에 의한 응집 등의 문제가 발생할 수 있다. 한편 철산화물은 합성가스 중의 C2-C3계의 타르를 분해하는데 효과가 알려져 있다. 따라서 본 연구에서는 적벽돌, 염색슬러지 회재 등에는 철산화물이 다량 함유되어 있는 것에 착안하여 폐기물중의 폐금속을 이용한 바이오매스 가스화에 대한 연구를 수행하였다. 점토광물계 폐기물인 적벽돌 파쇄물($SiO_2$ 67.2%, $Al_2O_3$ 19.7%, $Fe_2O_3$ 8.7%, $K_2O$ 2.0%, $TiO_2$ 1.2%, MgO 0.7%)을 전처리 한 후 유동매체로하여 우드펠렛을 가스화한 결과, 가스 생성량이 증가하고, 타르 및 탄화수소류가 감소하는 경향을 나타내었다. 특히 타르는 후단의 타르 트랩에서 타르가 거의 검출이 되지 않았다. 전처리를 하지 않은 적벽돌 파쇄물은 반응시간이 경과한 후에 가스화율이 증가함에 따라 철화합이 가스화로내에서 환원되어 타르를 분해하는데에는 어느 정도의 반응시간이 필요한 것을 확인하였다.

• Clean Technology
• /
• v.23 no.3
• /
• pp.223-236
• /
• 2017

As the use of waste and biomass increases in a power generation boiler, high temperature corrosion (HTC) problems of boiler heat exchangers are becoming very important. Chlorine of the low-rank fuels is mainly responsible for the HTC issues, which typically occur in the surface of high temperature heat exchanger like a superheater or reheater. In order to mitigate the problem, various approaches have been proposed in terms of design modification, material improvement, fuel pre-treatment and additive utilization. In this study, the current state of research and development focused on the additive method was investigated.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.2
• /
• pp.73-100
• /
• 2008

For the purpose of evaluating dose rate to individual due to long-term release of nuclides from the HLW repository, a biosphere assessment model and the implemented code, ACBIO, based on BIOMASS methodology have been developed by utilizing AMBER, a general compartment modeling tool. To show its practicability and usability as well as to see the sensitivity of compartment scheme or parametric variation to concentration and activity in compartments as well as annual flux between compartments at their peak values, some calculations are made and investigated: For each case when changing the structure of compartments and GBIs as well as varying selected input Kd values, all of which seem very important among others, dose rate per nuclide release rate is separately calculated and analyzed. From the maximum dose rates (Bq/y), flux-to-dose conversion factors (Sv/Bq) for each nuclide were derived, which are to be used for converting the nuclide release rate appearing from the geosphere through various GBIs to dose rate (Sv/y) for individual in critical group. It has been also observed that compartment scheme, identification of possible exposure group and GBIs could be all highly sensitive to the final consequences in biosphere modeling.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.125-130
• /
• 2012

In these days, there has been increased focus on global warming and the exhaustion of resources recently caused by the heavy consumption of fossil resources. In order to resolve these problems, biomass is increasingly gaining international attention as a renewable energy source. Biogas derived from various biomass is environmental friendly alternative fuel for power generation, heating and vehicle fuel. Large amounts of sewage sludge, food waste and manure are generated from human activity, but these organic wastes contain high levels of organic matter and thus they are potential substrates for producing methane of biogas. The biogas contains 60% of highly concentrated methane, which is expected to be used effectively as energy. In this paper, we investigate the status of biogas in Korea as an alternative energy.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.294-303
• /
• 2018

In this study, eco-friendly natural dyeing for pig leather was explored by using onion skin which is food waste. Sodium caseinate was used as a pre-treatment agent to improve dyeability of pig leather and its effect on dye uptake was investigated according to treatment concentration. Dye uptake of the pre-treated pig leather was increased by about two times compared to untreated one at 0.2% pre-treatment concentration. Onion skin colorant imparted YR color on pig leather. After mordanting, the color of pretreated/dyed pig leather was varied from brick-red to khaki shades. However, mordanting did not improved dye uptake of the pre-treated/dyed pig leather significantly. The color-fastnesses of un-mordanted samples to light, dry cleaning, rubbing were grades 3-4, 5, and 4, respectively, which is good enough to meet all Korean Standard for Fastness of leather products. After mordanting, the light fastness of pig leather was improved to 4, 4-5 grade. The efficacy of sodium caseinate as a pre-treatment agent for pig leather was verified by improved dye uptake and good colorfastness. And, the natural dyeing of pig leather using food waste would be a significant sustainable way in terms of eco-friendliness and reuse of biomass to reduce environmental pollution.

• Clean Technology
• /
• v.28 no.2
• /
• pp.97-102
• /
• 2022

Lithium sulfur (Li-S) batteries have attracted considerable attention as a promising candidate for next-generation power sources due to their high theoretical energy density, low cost, and eco-friendliness. However, the poor electrical conductivity of sulfur and its insoluble discharging products (Li₂S₂/Li₂S), large volume changes, severe self-discharge, and dissolution of lithium polysulfide intermediates result in rapid capacity fading, low Coulombic efficiency, and safety risks, hindering Li-S battery commercial development. In this study, a three-dimensionally (3D) connected hierarchical porous carbon framework (HPCF) derived from waste sunflower seed shells was synthesized as a sulfur host for Li-S batteries via a chemical activation method. The natural 3D connected structure of the HPCF, originating from the raw material, can effectively enhance the conductivity and accessibility of the electrolyte, accelerating the Li⁺/electron transfer. Additionally, the generated micropores of the HPCF, originated from the chemical activation process, can prevent polysulfide dissolution due to the limited space, thereby improving the electrochemical performance and cycling stability. The HPCF/S cell shows a superior capacity retention of 540 mA h g^-1 after 70 cycles at 0.1 C, and an excellent cycling stability at 2 C for 700 cycles. This study provides a potential biomass-derived material for low-cost long-life Li-S batteries.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.112-117
• /
• 2007

This study aims to develop an alternative energy like oil made from marine organic waste by marine products waste, spent fishing nets. There are already many commercial examples and case studies based on the petroleum industry-refuse plastic or refuse tire, however, it is rare that a research developing alternative energy from food waste and organic waste. Therefore, this study investigated the oil made from thermal decomposition under the high temperature and high pressure condition, and examined the possibility for commercial use by testing its own characteristics. A bio-oil from thermal decomposition at $250^{\circ}C$ and 40 atm was hard to remove impurities because of its high viscosity, showed lower caloric value than heavy oil, and generated various gases which were not appropriate for the use of fuel. It is noticeable that thermal decomposition was occurred at $250{\pm}5^{\circ}C$ using steam pressure, which much lower compared to the existing method of thermal decomposition, more than $500^{\circ}C$. Since the high viscosity of bio-oil, it is necessary a further study to use as liquid fuel.