• Applied Biological Chemistry
• /
• v.41 no.5
• /
• pp.331-336
• /
• 1998

The possibility of using waste brine from kimchi factory as a substrate for the production of the single cell protein was investigated. The growth of Pichia guilliermondii A9 isolated from waste brine was not inhibited by the NaCl up to 10% (w/v). BOD of the waste brine was reduced to one tenth after 24 hours of yeast culture. The addition of ammonium salt, phosphate, and micronutrients to the waste brine did not enhance the growth of P. guilliermondii A9. However, when the brine was enriched with juice from waste cabbage, the final cell mass increased proportionally with the amount of added organic material, suggesting a practical application for the treatment of two different types of waste produced during kimchi manufacturing.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.173-180
• /
• 1996

The contamination of the environment by heavy metals results in a serious public health problem due to the toxicity of those pollutants even at low concentrations. Microorganisms may be used to remediate wastewaters contamlialtd with heavy metals. The waste S. cerevisiae is an inexpensive readily available source of biomass for bioremediation of wastewater. S. cerevisiae was investigated for their ability to absorb Pb. The crushed biomass of S. cerevisiae exhibited higher Pb uptake capacity than the living S. cerevisiae and the sterilized S. cerevisiae. At the same metal concentration, metal uptake per unit concentration or adsorbent decreased when the biomass concentration rises. The order of the biosorption capacity of the living S. cerevisiae was Pb>Cu>Cd=Co>Cr. When S. cerevisiae was pretreated with 0.1 M NaOH, Pb uptake was increased by 150 percent and 0.1 M HC1, 0.1 M $H_2S_O4$ solutions were efficient in the desorption of Pb. The sorption equilibrium of Pb ions can be described by the Freundlich and Langmuir models.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.94-100
• /
• 2010

Colored compounds adsorption from the textile dyeing effluents on activated carbons produced from various indigenous vegetable sources by zinc chloride activation is studied. The most important parameters in chemical activation were found to be the chemical ratio of $ZnCl_2$ to feed (3:1), carbonization temperature (460-470 $^{\circ}C$) and time of activation (75 min). The absorbance at 511 nm (red effluent) and 615 nm (blue effluent) are used for estimation of color. It is established that at optimum temperature ($50^{\circ}C$), time of contact (30-40 min) and adsorbent loading (2 g/L), activated carbons developed from rain tree (Samanea saman) saw dust and blackberry (Randia formosa) tree saw dust showed great capability to remove color materials from the effluents. It is observed that adsorption of reactive dyes by all types of activated carbons is more than that of disperse dyes. It is explained that because of its acidic nature the activated carbon can adsorb better reactive dye particles containing large number of nitrogen sites and $-SO_3Na$ group in their structure. The use of activated carbons from the indigenous biomass would be economical, because saw dusts are readily available waste worldwide.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.1
• /
• pp.183-192
• /
• 2011

In recent years there has been an increasing focus on global warming and the exhaustion of resources caused by the heavy consumption of fossil fuels. In order to resolve these issues, biomass has gained much attention as a source of renewable energy. One area of particular interest has been the production of biodiesel. The biodiesel produced by the transesterification of vegetable oils, animal fats and waste cooking oils is expected to be one of the eco-friendly biomass-based alternatives to fossil fuels. This paper reviews some of the recent findings for the effective biodiesel production system, together with several factors affecting the biodiesel yield.

• International journal of advanced smart convergence
• /
• v.5 no.2
• /
• pp.18-23
• /
• 2016

Cell walls of microalgae consist of a polysaccharide and glycoprotein matrix providing the cells with a formidable defense against its environment. Anaerobic digestion (AD) of microalgae is primarily inhibited by the chemical composition of their cell walls containing biopolymers able to resist bacterial degradation. Adoption of pre-treatments such as thermal, thermal hydrolysis, ultrasound and enzymatic hydrolysis have the potential to remove these inhibitory compounds and enhance biogas yields by degrading the cell wall, and releasing the intracellular algogenic organic matter (AOM). This paper preproposal stage investigated the effect of different pre-treatments on microalgae cell wall, and their impact on the quantity of soluble biomass released in the media and thus on the digestion process yields. This Paper present optimum approach to degradation of the cell wall by ultra-sonication with practical design specification parameter for ultrasound based pretreatment system. As a result of this paper presents, a microalgae system in a wastewater treatment flowsheet for residual nutrient uptake can be justified by processing the waste biomass for energy recovery. As a conclusion on this result, Low energy harvesting technologies and pre-treatment of the algal biomass are required to improve the overall energy balance of this integrated system.

• Elastomers and Composites
• /
• v.56 no.3
• /
• pp.136-151
• /
• 2021

Biomass lignin, a waste produced during the paper and bio-ethanol production process, is a cheap material that is available in large quantities. Thus, the interest in the valorization of biomass lignin has been increasing in industrial and academic areas. Over the years, lignin has been predominantly burnt as fuel to run pulping plants. However, less than 2% of the available lignin has been utilized for producing specialty chemicals, such as dispersants, adhesives, surfactants, and other value-added products. The development of value-added lignin-derived co-products should help make second generation biorefineries and the paper industry more profitable by valorizing lignin. Another possible approach towards value-added applications is using lignin as a component in plastics. However, blending lignin with polymers is not simple because the polarity of lignin molecules results in strong self-interactions. Therefore, achieving in-depth insights on lignin characteristics and structure will help in accelerating the development of lignin-based products. Considering the multipurpose characteristics of lignin for producing value-added products, this review will shed light on the potential applications of lignin and lignin-based derivatives on polymeric composite production. Moreover, the challenges in lignin valorization will be addressed.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.2
• /
• pp.159-169
• /
• 2019

The activated carbon materials were prepared from waste biomass by ultrasonic assisted chemical activation method (UCA), ultrasonic assisted physical activation method (UPA) and Manganese nitrogen doped carbon (Mn/N-C). The XRD result shows the turbostatic (fully disordered) structure. The cyclic voltammetry test was done at 50 mV/s using 1M sodium sulfate and the values of specific capacitance were found to be 93, 100 and 115 F/g for UCA, UPA and Mn/N-C respectively. The power density values for the samples UCA, UPA and Mn/N-C were found to be 46.04, 87.97 and 131.42 W/kg respectively. The electrochemical impedance spectroscopy was done at low frequency between 1 to 10 kHz. The Nyquist plot gives the resistant characteristics of the materials due to diffusional resistance at the electrode-electrolyte interface. The Energy Dispersive X-Ray Spectroscopyanalysis (EDAX) analysis showed that the percentage doping of nitrogen and manganese were 3.53 wt% and 9.44 wt% respectively. It is observed from the experiment Mn/N-C doped carbon show good physical and electrochemical properties.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2010

This study was carried out to analyze national and regional distribution of the organic wastes generation and build their distribution maps including food wastes, paper and wood wastes, wastewater and slaughterhouse wastes. The information for the annual waste production was modified using statistics from Ministry of Environment (MOE). Based on waste generation resources data, we established database architecture table about waste generation. The distribution maps for food wastes were built up in both national and regional scales and distribution maps for paper and wood wastes, wastewater and slaughterhouse wastes were also produced, respectively. The distribution maps of waste generation graphically provide the information regarding biomass resources to policy-makers, farmers, general users and it is highly expected to be utilized for policy-making of environmental-friendly agriculture and bioenergy.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.339-346
• /
• 2019

L-Arabinose, a five carbon sugar, has not been considered as an important bioresource because most studies have focused on D-xylose, another type of five-carbon sugar that is prevalent as a monomeric structure of hemicellulose. In fact, L-arabinose is also an important monomer of hemicellulose, but its content is much more significant in pectin (3-22%, g/g pectin), which is considered an alternative biomass due to its low lignin content and mass production as juice-processing waste. This review presents native and engineered microorganisms that can ferment L-arabinose. Saccharomyces cerevisiae is highlighted as the most preferred engineering host for expressing a heterologous arabinose pathway for producing ethanol. Because metabolic engineering efforts have been limited so far, with this review as momentum, more attention to research is needed on the fermentation of L-arabinose as well as the utilization of pectin-rich biomass.

• Carbon letters
• /
• v.19
• /
• pp.66-71
• /
• 2016

The development of nanostructured functional materials derived from biomass and/or waste is of growing importance for creating sustainable energy-storage systems. In this study, nanoporous carbonaceous materials containing numerous heteroatoms were fabricated from waste coffee grounds using a top-down process via simple heating with KOH. The nanoporous carbon nanosheets exhibited notable material properties such as high specific surface area (1960.1 m² g⁻¹), numerous redox-active heteroatoms (16.1 at% oxygen, 2.7 at% nitrogen, and 1.6 at% sulfur), and high aspect ratios (>100). These unique properties led to good electrochemical performance as supercapacitor electrodes. A specific capacitance of ~438.5 F g⁻¹ was achieved at a scan rate of 2 mV s⁻¹, and a capacitance of 176 F g⁻¹ was maintained at a fast scan rate of 100 mV s⁻¹. Furthermore, cyclic stability was achieved for over 2000 cycles.