• Journal of Applied Biological Chemistry
• /
• v.60 no.3
• /
• pp.245-248
• /
• 2017

Saline groundwater was obtained from a 100-m deep basalt layer into which seawater had infiltrated. This groundwater is known to contain various minerals. Like deep seawater, saline groundwater is expected to have various applications due to the presence of biologically beneficial minerals. In Korea, saline groundwater is mainly obtained from the coastal area of Jeju. Before applying saline groundwater to various products, however, its biological safety needs to be examined. In the present study, skin and eye irritation tests were performed to assess the safety of saline groundwater according to the guidelines of the Korea Food and Drug Administration. When compared to control, Jeju saline groundwater showed no level of eye and skin irritation. These results suggest that Jeju saline groundwater induces no irritation, and is therefore sufficiently safe to be applied to the eye and skin of people.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.188-188
• /
• 2017

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2005.05a
• /
• pp.131-132
• /
• 2005

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.133-138
• /
• 2018

Safety management has become even more important because of the safety and environmental issues that have arisen since the 2000s. However, the safety study requires many empirical data, so there are many limitations. In the case of pipe safety, simulation programs exist, but it is difficult to get data about the pipe internal erosion of the pipe. In this study, the erosion rate of the pipe elbow was simulated using computational fluid dynamics (CFD). Also, the failure period of the pipe was calculated by the limit state function using erosion rate. In the case of CFD pipe, a sample which is actually operated in Yeosu industrial complex was used, and the geometry and mesh formation were rationalized in terms of typical fluid dynamics simulations. Using the Discrete Phase Model (DPM) and the corrosion model, the erosion rate ($3.09227mm{\cdot}yr^{-1}$) was obtained from CFD simulations. As a result of applying the erosion rate to the limit state function, we obtained the pipe failure period value, 14.2 years to trigger a leak and 28.2 years to trigger a burst. Through these processes, we concluded that pipe erosion is one of the major failure modes. In addition to the results, this study has significance for suggesting the methodology of the pipe safety study.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2004.05a
• /
• pp.87-87
• /
• 2004

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.243-243
• /
• 2017

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1505-1516
• /
• 2016

The detection of food pathogens is an important aspect of food safety. A range of detection systems and new analytical materials have been developed to achieve fast, sensitive, and accurate monitoring of target pathogens. In this review, we summarize the characteristics of selected nanomaterials and their applications in food, and place focus on the monitoring of biological and chemical contaminants in food. The unique optical and electrical properties of nanomaterials, such as gold nanoparticles, nanorods, quantum dots, carbon nanotubes, graphenes, nanopores, and polydiacetylene nanovesicles, are closely associated with their dimensions, which are comparable in scale to those of targeted biomolecules. Furthermore, their optical and electrical properties are highly dependent on local environments, which make them promising materials for sensor development. The specificity and selectivity of analytical nanomaterials for target contaminants can be achieved by combining them with various biological entities, such as antibodies, oligonucleotides, aptamers, membrane proteins, and biological ligands. Examples of nanomaterial-based analytical systems are presented together with their limitations and associated developmental issues.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.23-29
• /
• 2016

This study was carried out to survey residual characteristics of pesticide in fresh ginsengs collected from 45 markets at 15 regions in Korea using multiresidue analysis with a GC-MS/MS and an LC-MS/MS. After residue analysis was performed, the pesticides detected from ginsengs were quantitated using their analytical methods validated by recovery tests with a GC-ECD/NPD. As a results of analysis of pesticide residue, cypermethrin, fenitrothion, fludioxonil, thifluzamide, and tolclofos-methyl were detected from 16 samples among 45 samples in total, indicating detection rate was 35.6%. Tolclofos-methyl was found to be highest in detection frequency in ginseng. Fenitrothion that has not established maximum residue limit and pre-harvest interval for ginseng was detected. The amounts of all pesticides detected were less than their MRLs. Ratios of estimated daily intakes to acceptable daily intakes of the detected pesticides in ginseng were found to be from 0.03 to 16.67%.

• Journal of Applied Biological Chemistry
• /
• v.56 no.4
• /
• pp.191-197
• /
• 2013

To classify the chemical hazard according to globally harmonized system of classification and labeling of chemicals (GHS), we investigated the genotoxicity of three chemicals, methyl myristate, 2-ethylhexanoic acid zinc salt, N,N,N',N'-tetrakis(2-hydroxyethyl) ethylenediamine, using male ICR mice bone marrow cells for the screening of micronucleus induction. Although these three chemicals have already been tested numerous times, a micronucleus test has not been conducted. The seven week-old male ICR mice were tested at three dosages for the three chemicals, respectively. After 24 h of oral administration with the three chemicals, the mice were sacrificed and their bone marrow cells were prepared for smearing slides. As a result of counting the micronucleated polychromatic erythrocyte (MNPCE) of 2,000 polychromatic erythrocytes, all treated groups expressed no statistically significant increase of MNPCE compared to the negative control group. There were no clinical signs related with the oral exposure of these three chemicals. It was concluded that these three chemicals did not induce micronucleus in the bone marrow cells of ICR mice, and there was no direct proportion with dosage. These results indicate that the three chemicals have no mutagenic potential under each test condition, and it is not classified these chemicals as mutagens by GHS.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.345-352
• /
• 2014

Objectives: This study is aimed to describe the current situation about urinary biomarker N-methylformamide(NMF) for workers exposed to N,N-dimethylformamide(DMF) according to industrial classification. Materials: Special health examination records of the workers who had undergone urinary biological monitoring in 2013 were collected. The numbers and percentage of workers, whose urinary NMF values were above the limit of detection(LOD) and above the biological exposure index(BEI) were calculated. Health relatedness with DMF as judged by their doctors was also described. All description was classified according to the $9^{th}$ Korean Standard Industrial Classification(KSIC). Results: It appeared that most workers exposed to DMF belong to manufacturing section(80.7%). The geometric mean(GM) values of urinary NMF were 6.25 mg/L, 3.54, and 3.86 for the manufacturing section, professional, scientific and technical activities section, and for the construction section respectively. In detail, it seemed that division of textiles(except apparel) (GM 7.51 mg/L), division of leather, luggage and footwear(11.59 mg/L), and division of rubber and plastic products(6.89 mg/L) were highly exposed to DMF with a high percentage of workers with urinary NMF values above BEI. This was probably due to the effect of skin absorption that the division of leather, luggage and footwear showed the highest urine NMF GM. Conclusions: It seemed that workers in manufacture industries such as textile, leather, luggage, footwear, rubber and plastic products were highly exposed to DMF. So, efforts should be focused on those industries in order to effectively diminish worker's exposure. Further studies to compare DMF air-monitoring with bio-monitoring according to industrial classification should be considered.