• 한국건설순환자원학회논문집
• /
• 제8권2호
• /
• pp.204-211
• /
• 2020

PLA(Poly-Lactic Acid)섬유는 친환경소재이며 자연분해가 되므로 건설재료에 사용할 경우 내부 공극연결구조를 가진 다공성 재료의 제조가 가능하다. 본 연구에서는 국내에서 생산된 PLA 섬유(직경 0.5mm, 1.0mm, 길이 10mm)를 대상으로 강알칼리와 고온에서의 용해실험을 수행하였으며, 이를 이용하여 FA기반 지오폴리머에 활용하였다. 고온양생과 강알칼리 용액을 통하여 강도는 확보하였으나, 완전한 PLA 섬유의 용해을 확보하지 못하였다. 기존의 연구인 0.003mm의 직경에서는 완전히 용해하였으나 0.5mm는 약 42.5%, 1.0mm는 약 33.3%의 용해율을 가지고 있는 것으로 평가되었다. 또한 섬유의 체적이 커짐에 따라 양생시 부유하는 섬유가 발생하여 작업성과 용해에 부정적인 영향을 나타내었다. PLA 특성은 생산하는 원재료와 생산조건에 따라 달라질 수 있으나, 다공성 건설 자재로서 사용하기 위해서는 0.1mm 내외의 PLA 섬유의 사용이 바람직하다고 판단된다.

• 상하수도학회지
• /
• 제34권1호
• /
• pp.75-83
• /
• 2020

This study investigated the degradation characteristics and biodegradability of phenol, refractory organic matters, by injecting MgO and CaO-known to be catalyst materials for the ozonation process-into a Dielectric Barrier Discharge (DBD) plasma. MgO and CaO were injected at 0, 0.5, 1.0, and 2 g/L, and the pH was not adjusted separately to examine the optimal injection amounts of MgO and CaO. When MgO and CaO were injected, the phenol decomposition rate was increased, and the reaction time was found to decrease by 2.1 to 2.6 times. In addition, during CaO injection, intermediate products combined with Ca²⁺ to cause precipitation, which increased the COD (chemical oxygen demand) removal rate by approximately 2.4 times. The biodegradability of plasma treated water increased with increase in the phenol decomposition rate and increased as the amount of the generated intermediate products increased. The biodegradability was the highest in the plasma reaction with MgO injection as compared to when the DBD plasma pH was adjusted. Thus, it was found that a DBD plasma can degrade non-biodegradable phenols and increase biodegradability.

• Composites Research
• /
• 제31권6호
• /
• pp.371-378
• /
• 2018

본 연구에서는 폴리유산 나노복합재의 열탄성 거동을 예측하기 위해 분자동역학 전산모사를 수행하고 그 결과를 열탄성 미시역학 모델 예측해와 비교하였다. 폴리유산의 두 이성질체인 D유산(Poly D-lactide)와 L유산(Poly L-lactide)을 혼합한 스테레오 콤플렉스를 모델링하였고 이들을 기지로 사용한 탄소나노튜브 나노복합재를 구성하였다. 유산의 분해 유무에 따른 유리전이온도와 탄성계수 그리고 열팽창계수를 앙상블 전산모사를 통해 예측하였다. 미시역학 모델에서는 계면의 완전 결합을 가정한 이중입자 모델을 적용하여 탄성계수와 열팽창계수를 동일한 조성에서 예측하였다. 그 결과 열적 안정성에 있어 스테레오 콤플렉스에 탄소나노튜브가 첨가될 경우 유산의 뛰어난 계면 흡착과 이에 따른 열적 안정성 향상을 보였다. 순수한 유산과 나노복합재 모두 가수 분해에 따른 열적 특성 변화는 관찰되지 않았다. 또한, 스테레오 콤플렉스와 나노튜브 간 계면은 약한 불완전 결합상태 임을 알 수 있었다.

• 한국폐기물자원순환학회지
• /
• 제35권7호
• /
• pp.653-659
• /
• 2018

In the industrial wastewater that occupies a large proportion of river pollution, the wastewater generated in textile, leather, and plating industries is hardly decomposable. Though dyeing wastewater has generally been treated using chemical and biological methods, its characteristics cause treatment efficiencies such as chemical oxygen demand (COD) and suspended solids (SS) to be reduced only in the activated sludge method. Currently, advanced oxidation technology for the treatment of dyeing wastewater is being developed worldwide. Electro-coagulation is highly adapted to industrial wastewater treatment because it has a high removal efficiency and a short processing time regardless of the biodegradable nature of the contaminant. In this study, the effects of the current density and the electrolyte condition on the COD removal efficiency in dyeing wastewater treatment by using electro-coagulation were tested with an aluminum anode and a stainless steel cathode. The results are as follows: (1) When the current density was adjusted to $20A/m^2$, $40A/m^2$, and $60A/m^2$ under the condition without electrolyte, the COD removal efficiency at 60 min was 62.3%, 72.3%, and 81.0%, respectively. (2) The removal efficiency with NaCl addition was 7.9% higher on average than that with non-addition at all current densities. (3) The removal efficiency with $Na_2SO_4$ addition was 4.7% higher on average than that with non-addition at all current densities.

• 패션비즈니스
• /
• 제26권3호
• /
• pp.87-97
• /
• 2022

This study investigated the dyeability and color change of the natural dyes of SeaCell, a biodegradable functional fiber that is permanently added to cellulose fibers with natural additives extracted from seaweeds. The natural dyes used in the study are five dyes. Gardenia and turmeric, which are yellow-based natural dyes, Sappan wood and Lac, which are red-based natural dyes, and Indigo, a blue-based natural dye, were selected. The dyeability and color change according to the change of the mordant conditions and the number of times of dyeing were investigated. In addition, the dyeing properties and colors of cotton and silk fibers were compared under the same dyeing conditions as SeaCell. The study results are as follows. It was found that SeaCell had lower dyeing properties than silk, a protein fiber, in gardenia, sappan wood, and lac dyes, but had higher dyeing properties than cotton with the same cellulose component as SeaCell fibers. In the case of turmeric, it showed higher dyeing properties than cotton except for the no mordant condition. In the case of Indigo dye, SeaCell shows the best dyeability, indicating that it is a very suitable fiber for Indigo dyeing. As sustainable functional fibers are continuously developed in the future, natural dyes that are environmentally friendly and human-friendly are actively introduced and commercialized, and it is expected that they can be used as reference materials.

• 공업화학
• /
• 제34권2호
• /
• pp.121-125
• /
• 2023

카세인(casein)은 포유류의 우유에서 발견되는 단백질로 우유에서는 80% 이상 함유되어 있다. 사람의 모유에는 약 20~45%가 포함되어 있으며 생체 적합성이 높아 의료 및 산업 소재로 사용되고 있다. 카세인은 양친매성 구조로 내부는 소수성이기 때문에 수용액에서 마이셀로 자가 조립이 가능하여 난용성 약물을 봉입할 수 있다. 또한, 단백질 고분자 소재로 생분해성을 갖고 있어 약물의 전달체로서 적합한 특징을 가진다. 본 연구에서는 칼슘 이온 외에 마그네슘, 아연, 철 등 생체 내 존재하는 다양한 금속 이온들을 사용하여 각각 효과적인 카세인 나노입자 형성 조건을 규명하였다. 동적 광산란 측정기와 제타 전위 측정을 통해 150 nm 이하의 균일한 사이즈를 유지하고 음전하를 띠는 나노입자가 형성됨을 확인하였다. 또한, 각각의 카세인 나노입자가 HeLa 세포주에서 80% 이상의 생존율을 나타내 낮은 세포 독성을 확인하였고, 카세인 나노입자 내부에 시험 약물로서 나일 레드를 봉입하여 세포 내부로 효과적으로 유입됨을 공초점 현미경으로 입증하였다. 본 실험들을 통해 제조된 카세인 나노입자의 약물 전달체로서의 가능성을 확인하였다.

• Composites Research
• /
• 제21권3호
• /
• pp.18-23
• /
• 2008

쾌속 조형(Rapid Prototyping; RP) 기술은 다양한 분야에서 활용되고 있다. 본 연구에서는 RP 기술을 이용한 나노복합재 적층장치(Nano Composite Deposition System, NCDS)를 사용하여 이식 가능한 약물전달시스템을 제작하였다. 약물전달시스템 복합재는 약물 입자로 5-fluorouracil (5-FU)를 사용하였으며, 생분해 고분자 매트릭스로 PLGA85/15를 사용하였다. 제작된 약물전달시스템은 넓은 표면적을 가질 수 있도록 지지체(scaffold) 형상으로 제작되었으며, in vitro 환경에서의 약물방출실험이 수행되었다. 약물방출제어를 위하여 생체적합재료인 수산화아파타이트(Hydroxyapatite, HA)를 약물-고분자 복합재에 첨가하였다. 약 50일간의 방출실험을 통하여 약물방출의 가능성을 보임을 확인하였다.

• IMMUNE NETWORK
• /
• 제21권6호
• /
• pp.44.1-44.15
• /
• 2021

Tumor peptides associated with MHC class I molecules or their synthetic variants have attracted great attention for their potential use as vaccines to induce tumor-specific CTLs. However, the outcome of clinical trials of peptide-based tumor vaccines has been disappointing. There are various reasons for this lack of success, such as difficulties in delivering the peptides specifically to professional Ag-presenting cells, short peptide half-life in vivo, and limited peptide immunogenicity. We report here a novel peptide vaccination strategy that efficiently induces peptide-specific CTLs. Nanoparticles (NPs) were fabricated from a biodegradable polymer, poly(D,L-lactic-co-glycolic acid), attached to H-2K^b molecules, and then the natural peptide epitopes associated with the H-2K^b molecules were exchanged with a model tumor peptide, SIINFEKL (OVA_257-268). These NPs were efficiently phagocytosed by immature dendritic cells (DCs), inducing DC maturation and activation. In addition, the DCs that phagocytosed SIINFEKL-pulsed NPs potently activated SIINFEKL-H2K^b complex-specific CD8⁺ T cells via cross-presentation of SIINFEKL. In vivo studies showed that intravenous administration of SIINFEKL-pulsed NPs effectively generated SIINFEKL-specific CD8⁺ T cells in both normal and tumor-bearing mice. Furthermore, intravenous administration of SIINFEKL-pulsed NPs into EG7.OVA tumor-bearing mice almost completely inhibited the tumor growth. These results demonstrate that vaccination with polymeric NPs coated with tumor peptide-MHC-I complexes is a novel strategy for efficient induction of tumor-specific CTLs.

• Advances in materials Research
• /
• 제13권2호
• /
• pp.115-128
• /
• 2024

Concrete is the most significant material in the construction industry which is required to construct several facilities like roads, buildings, and bridges etc. which leads to the economic development of a country. But now days, in view of sustainable development and environmental problems, plastic waste management is one of the major environmental issues due to its non-biodegradable nature which allows it to stay in the landfills until they are cleaned up. To overcome all these concerns, plastic waste may be used as a substitute of natural fine and coarse aggregate in concrete and a valuable solution to utilize the plastic items which causes several problems. In order to, present study is focused on the affecting properties of concrete as workability, compressive strength, and tensile strength of concrete with using plastic waste and without using plastic waste. Based on the detailed literature, it was observed that the plastic waste is not affecting the quality and consistency of concrete. However, as the number of PVC particles in the mixture increased, the drying shrinkage values decreased and the inclusion of plastic flakes can mitigate drying shrinkage cracking which leads the higher durability of concrete. Based on the comprehensive literature, it was also observed that the plastic aggregate found to be suitable for low and medium strength concrete. However, the investigation on the application of plastic aggregate in the high strength concrete is found limited. It was concluded that the optimum percentage of the plastic aggregate was found about 20%.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.211-220
• /
• 2024

Polylactic acid or polylactide (PLA) is a biodegradable thermoplastic that can be produced from renewable material to create various components for industrial purposes. In 3D printing technology, PLA is used due to its good mechanical, electrical, printing properties, environmentally friendly and non-toxic properties. However, the physical properties and excellent electrical insulation properties of PLA have limited its application. In this study, with the carbon black (CB) as filler added into PLA, the lattice spacing and morphology were investigated by using X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. The physical properties of PLA-carbon composite were evaluated by using tensile test, shore D hardness test and density and voids measurement. Impedance test was conducted to investigate the electrical properties of PLA-Carbon composites. The results demonstrate that the inclusion of carbon black as filler enhances the physical properties of the PLA-carbon composites, including tensile properties, hardness, and density. The addition of carbon black also leads to improved electrical conductivity of the composites. Better enhancement toward the electrical properties of PLA-carbon composites is observed with 1wt% of carbon black in N774 grade. The N550 grade with 2wt% of carbon black shows better improvement in the physical properties of PLA-carbon composites, achieving 10.686 MPa in tensile testing, 43.330 in shore D hardness test, and a density of 1.200 g/cm3 in density measurement. The findings suggest that PLA-carbon composites have the potential for enhanced performance in various industrial applications, particularly in sectors requiring improved physical and electrical properties.