• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.101-105
• /
• 2008

Some physical properties of rapeseed such as geometric properties (linear dimensions, sphericity, seed volume, surface area) and gravimetric properties (the mass of one thousand seeds, bulk density) were analyzed at five levels of moisture content of 10.03, 14.91, 20.07, 25.06 and 30.12% (w.b.). The physical properties of rapeseed were evaluated as a function of seed moisture content. In the moisture range, when the moisture content increase, sphericity decreased from 0.946 to 0.927, and geometric mean diameter, seed volume and surface area increased from 2.17 to 2.31 mm, 5.58 to $6.88 \;mm^3$ and 14.76 to $16.77\;mm^2$ respectively. Mass of one thousand seeds increased from 5.04 to 6.46 g. Bulk density decreased from 579.3 to $549.2\;kg/m^3$ due to swelling of the seed.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.861-868
• /
• 2020

The use of polyphenol extracts from radiata pine (Pinus radiata) bark as raw materials for bio-foams was investigated along with the optimal NaOH extraction conditions. The targeted yield of alkaline extracts was 60%, and the targeted pH was 11 to 12. The radiata pine bark was composed of 70% of a 1% NaOH extract, which contained mainly polyphenols, such as proanthocyanidin (PA). As the particle size of the bark decreased, the yield of the 1% NaOH extracts increased from 57 to 87%. A range of NaOH concentrations, liquor ratios, and extraction times were explored to establish an economic polyphenol extraction method. More than 60% of the alkaline extract was extracted, and the pH of the extract was approximately 12 when the optimum extraction conditions were employed, i.e., a liquor to bark ratio of 5:1, a NaOH dosage of 17 to 18% based on the bark weight, and a 1 h extraction time. Following neutralization of the alkaline extract, structural analysis indicated severe structural changes in the PA during the alkaline extraction. Because the alkaline extract was barely soluble in the solvent used for the structural analyses, it is assumed that chemical modification is required to increase the solubility of the alkaline extract for the production of bio-foams.

• Journal of the Korean Magnetic Resonance Society
• /
• v.14 no.2
• /
• pp.88-104
• /
• 2010

Human melanocortin-4 receptor (hMC4R) has a critical role in part of energy homeostasis, and their heterozygous mutations related in genetic cause of severe human obesity. In order to study the structure and function of these membrane proteins, it is important to prepare the samples. However, the preparation of transmembrane peptide is seriously difficult and time-consuming. Overexpression and purification of membrane proteins was reported to be difficult due to their innate insoluble and toxic properties. Among the many difficulties, the most important is the difficulty in obtaining sufficient quantities of purified protein. Recently, we succeed to produce large amounts of the second transmembrane domain from the wild-type hMC4R (wt-TM2) and D90N mutant hMC4R (m-TM2) and proposed the structural difference of them in membrane-like environments. In this paper, we demonstrate the optimization procedures to express and purify wt-TM2 or m-TM2 peptides, and solution NMR studies in different detergents to get high-resolution spectra were also described.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.6-10
• /
• 2001

The production of chitosan from the mycelia of Absidia coerulea was studied to improve cell growth and chitosan productivity. Culture conditions were optimized in batch cultivation (pH 4.5, agitator speed of 250 rpm, and aeration rate of 2 vvm) and the maximum chitosan concentration achieved was 2.3g/L under optimized conditions. Continuous culture was carried out successfully by the formation of new growth spots under optimized conditions, with a chitosan productivity of 0.052g/L(sup)-1 h(sup)-1, which is the highest value to date, and was obtained at a dulution rate of 0.05h(sup)-1. Cell chitosan concentrations reached about 14% in the steady state, which is similar to that achieved in batch culture. This study shows that for the continuous culture of Absidia coerulea it is vital to control the medium composition.

• Journal of Applied Biological Chemistry
• /
• v.42 no.4
• /
• pp.166-168
• /
• 1999

Inulo-oligosaccharides (IOS, $F_n$, n=2-6) were purified from enzymatic hydrolysates of water-soluble extract of Jerusalem artichoke tubers. Quantification of inulo-oligosaccharides was done using high pH anion exchange chromatography with pulsed amperometric detector (HPAEC-PAD) at the concentration range of 10-100 mg/L, which was compared with that of fructo-oligosaccharides (FOS, $GF_n$, n=1-7). Peak areas per mg IOS were higher than FOS at the same degree of polymerization (DP). Specific peak areas of IOS increased proportionally as DP increased up to six, in contrast to FOS showing no linearity.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.547-552
• /
• 2010

The recent bloom of a very large jellyfish Nemopilema nomurai has caused a danger to sea fishery and sea bathers. Presently, Nemopilema nomurai is thrown away through a separator system in the sea. The objective of this work was to produce bio-gas from Nemopilema nomurai by using anaerobic digestion. The bio-gas includes the hydrogen or the methane gases. It relates that Nemopilema nomurai is effectually changed into the renewable energy. When the jellyfish biomass was used as an organic carbon source the bio-gases were evolved. The aim of this study was to determine the optimal conditions for hydrogen and methane gases production according to the substrate concentrations of Nemopilema nomurai, optimal culture condition and the sludge-pretreatment without pH control. The optimal culture condition was found to be $35^{\circ}C$ and the heat-treatments of jellyfish was done at $120^{\circ}C$ for 30 min. The production rate of hydrogen and methane gas were found to be 8.8 mL/L/h, 37.2 mL/L/h from 1.5 g of dry Nemopilema nomurai.

• Journal of Environmental Health Sciences
• /
• v.40 no.4
• /
• pp.322-329
• /
• 2014

Objectives: The purpose of this study was to investigate the effect of BIO-CLOD on advanced wastewater treatment for enhanced removal efficiency and meeting the stringent discharge water requirements of wastewater treatment plants. Methods: Two experimental apparatuses consisting of anaerobic, anoxic and aeration tanks were operated. One included a BIO-CLOD cultivation tank. Organic and nutrient parameters and removal efficiency were analyzed by pH, BOD, CODcr, SS, T-N and T-P. Results: The average removal efficiencies of BOD, COD and SS from the apparatus with BIO-CLOD tank installation were 95.5%, 88.6% and 92.9%, respectively, and these were higher than the results from the apparatus without BIO-CLOD. The average TP removal efficiency with BIO-CLOD tank marked 56.0%, higher than the 47.3% from the apparatus without one. BIO-CLOD showed a higher performance for TN removal at 49.6%, compared to the result without BIO-CLOD of 34.3% Conclusion: By reaction with BIO-CLOD, ammonia removal was effective in the aeration tank, as was phosphorus release in the anaerobic tank. Phosphorus luxury uptake and nitrification in aeration tank proceeded smoothly. The application of BIO-CLOD can improve the decrease of odor and settleability of activated sludge in a wastewater treatment plant, as well as increase the removal efficiency of organic and nutrient materials in water.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.2
• /
• pp.169-177
• /
• 1987

Effect of microbiological product manure (Bio-com) on the growth and yield of vegetables and on physico-chemical properties of soil. Leaf lettuce and Garland Chrysanthemum were taken for test plants. A Jungdong (Series) silty loam soil was used for pot experiments. The results are summarized as following: 1. Treatment with Bio-com stimulated plant growth that were increased in the number of leaf, leaf area, plant height and root length both for Leaf lettuce and Garland Cyrysanthemum. 2. Yield increase of 123-1170% was obtained from Bio-com treatments compared to N.P.K.+manure treatment. Application of 2250 kg/10a of Bio-com gave the highest yield. 3. Fertilizer effect of Bio-com appeared much earlier than that of manure. 4. Plant content of $K_2O$ was highest when treated with Bio-com. Plants absorbed considerably more N, $P_2O_5$ and MgO. 5. Content of N, $P_2O_5$ in Garland Chrysanthemum were higher when treated with Bio-com. 6. Content of $P_2O_5$ in soil was at the highest level. Soil pH, content of exchangeable soil Ca and Mg were also high with Bio-com fertilization.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.899-904
• /
• 2014

The atomic structures and electronic properties of six classical and nonclassical $H_2O$@$C_{24}$ fullerene regioisomers are systematically studied using the hybrid density functional B3LYP method and M06-2X method with empirical dispersion in conjunction with the 6-31G(d,p) basis sets. The charge transfer, frontier orbitals, dipole moment, energy gap between the HOMO and LUMO, and volume change of the $C_{24}$ cage are analyzed upon encapsulation of a $H_2O$ molecule in each $C_{24}$ regioisomer. All encapsulation processes are endothermic and the relative stabilities of six $C_{24}$ fullerene regioisomers change upon encapsulation of $H_2O$.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.150-151
• /
• 1998

Drug delivery to the brain is facilitated by the synthesis of chimeric peptides, where in neuropharmaceuticals are linked to a vector such as an antibody to the transferrin receptor that mediates transcytosis through the blood-brain barrier (BBB). When disulfide linkers are used in the chimeric peptide, it is crucial that the S-S bridge is stable during transit and that cleavage does not occur prematurely within endothelial cells, as the peptide drug moiety would then be sequestered by the BBB instead of passing through it. The present study addressed that problem. As a model drug a metabolically stable opioid peptide, [$^3$H]DALDA (Tyr-dArg-Phe-Lys-NH$_2$), was used. It was monobiotinylated with NHS-SS-biotin to yield bio-[$^3$H]DALDA. The biotinylated peptide was bound to the vector OX26-SA which is a covalent conjugate of OX26 and streptavidin (molar ratio = 1: 1). In vitro treatment of the chimeric peptide, bio-[$^3$H]DALDA/OX26-SA, with a reducing agent, dithiothreitol, released the labeled peptide from the vector by conversion of bio-[$^3$H]DALDA to the desbiotinylated derivative, desbio-[$^3$H]DALDA.