• Journal of Ecology and Environment
• /
• v.41 no.7
• /
• pp.191-201
• /
• 2017

Background: Limited availability of corn stover due to the competing uses (organic manure, animal feed, bio-materials, and bioenergy) presents a major concern for its future in the bio-economy. Furthermore, biomass research has exhibited different results due to the differences in the supply of enzymes and dissimilar analytical methods. The effect of the two leading pretreatment techniques (dilute acid and alkaline) on glucose yield from three corn stover fractions (cob, stalk, and leaf) sourced from a single harvest in Uganda were studied at temperatures 100, 120, 140, and $160^{\circ}C$ over reaction times of 5, 10, 30, and 60 min. Results: From this study, the highest glucose concentrations obtained from the dilute acid (DA) pretreated cobs, stalks, and leaves were 18.4 g/L (66.8% glucose yield), 16.2 g/L (64.1% glucose yield), and 11.0 g/L (49.5% glucose yield), respectively. The optimal pretreatment settings needed to obtain these yields from the DA pretreated samples were at a temperature of $160^{\circ}C$ over an incubation time of 30 min. The highest glucose concentrations obtained from the alkaline (AL) pretreated cobs, stalks, and leaves were 24.7 g/L (81.73% glucose yield), 21.3 g/L (81.23% glucose yield), and 15.0 g/L (51.92% glucose yield), respectively. To be able to achieve these yields, the optimal pretreatment settings for the cobs and stalks were $140^{\circ}C$ and for a retention time of 30 min, while the leaves require optimal conditions of $140^{\circ}C$ and for a retention time of 60 min. Conclusions: The study recommends that the leaves could be left on the field during harvesting since the recovery of glucose from the pretreated cobs and stalks is higher.

• Asian Journal of Turfgrass Science
• /
• v.4 no.2
• /
• pp.77-83
• /
• 1990

The effect of bio-fertilizer, which was manufactured poultry manure, on the fall performance of Korean lawngrass was determined on a clay loam soil. Plant length was characterized by increasing the amount of bio-fertilizer applied. This trend was also true in dry matter yield of tops during the experimental period from August 31 through October 30. Both tiller numbers and stolon length steadily increased with increasing amount of bio-fertilizer applied, and 40m/t application of bio-fertilizer was found to be most effective on both components. performance shown on November 5 was prominent for both green leaf and root weights when the increased amount of bio-fertilizer was applied. Korean lawngrass had three times as much green leaf weight with 40m/t application of bio-fertilizer as with other treatments. Several functions of increment of above- ground part components caused by increasing root weight, which is greatly affected by bio-fertilizer application, was discussed. Turf quality was much improved by applying bio-fertilizer, indicating that this fertilizer might play an improtant role in respect of soil structure, water retention etc.

• Journal of the Korean Society of Food Culture
• /
• v.37 no.1
• /
• pp.47-60
• /
• 2022

This study examines the effects of different cooking methods (stir-frying, steaming, superheated-steaming) on the contents and the true retention of moisture, water-soluble vitamins, and bioactive compounds of ten selected vegetables: broccoli, brussels sprout, cabbage, eggplant, green bean, onion, red cabbage, red onion, squash, and tomato. The total color difference (𝚫E) values were decreased after stir-frying the samples, except for eggplant, green bean, and tomato. The true retention of water-soluble vitamins (B₁, B₂, B₃, and C) was increased in most vegetables after superheated-steaming, as compared to steaming and stir-frying. Moreover, compared to the uncooked vegetables, a higher true retention of total polyphenol and flavonoid was obtained for most vegetables subsequent to superheated-steaming. Total anthocyanin content was detected only in eggplant, red cabbage, and red onion, and a smaller loss of anthocyanin was determined after subjecting red cabbage to superheated-steaming. Also, the free radical scavenging activities were higher in superheated-steaming vegetables, except in eggplant and squash. These results indicate that superheated-steaming induces a positive effect for retaining water-soluble vitamins and functional components of vegetables.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.7
• /
• pp.885-891
• /
• 2009

To examine stability of a violet red pigment in a Salicornia herbacea L., several tests for pH, sugar, organic acid, ascorbic acid, amino acid, salt and temperature effect were carried out. A violet red pigment in Salicornia herbacea L. was the most stable in the range of pH 4 to 6. Each of the violet red pigments in Salicornia herbacea L. added with different amounts of sugar showed higher retention rate according to storage time than those of the control group. After 10 days of storage, especially the retention rate of the experimentals with 0.5 M sucrose was higher than the controls by about 11.1% while fructose, maltose, glucose and galactose were less higher in order. Also, adding organic acid reduced retention rate of the experimentals over the controls irrespective of sort and concentration of organic acid; also, the retention rate of the experiment with 0.5 M organic acid, the highest amount of all, reduced radically to 13.1 to 15.9% after 10 days storage. The retention rate of the experimentals added 1,000 ppm ascorbic acid and thio urea respectively after 10 days was 48.4%, which is higher than the controls by around 23.1%. As to amino acid, treatment on the pigment with aspartic acid 50 mM marked the highest retention rate of 41.5% and treatment with 2.0 M NaCl showed 31.6% retention rate, which was higher than the controls. While low temperature like $5^{\circ}C$ and $25^{\circ}C$ kept the stability of the pigment in storage, as temperature increased the stability of the pigment dropped rapidly.

• Journal of Environmental Impact Assessment
• /
• v.20 no.6
• /
• pp.815-821
• /
• 2011

This study aims to estimate the biological decomposition capacity of MPC(Microorganism Porous-Concrete). MPC has specific surface area formed by inside pores, and bio compound was added to those pores to reduce pollutants loading. To evaluate the water purification capacity of MPC, we carried out the comparative studies using different media types [GPC(General Porous-concrete), CPC(Compound porous-concrete), LPC(Lightweight aggregate porous-concrete)] under the condition of CFSTR, and different retention times (30, 60 and 120 min). We also estimated the purification capacity of MPC under different concentrations of pollutant loadings. The MPC showed higher efficiency in water purification function than other conventional porous concretes with efficient decrease rates of SS, BOD, COD, and nutrient concentrations. In the comparison experiment for different retention times, MPC showed the highest removal efficiency for all tested pollutants in the longest retention time(120 min). In the long period test, the removal efficiencies of MPC concrete were high until 100 days after the set up of the operation, but began to decrease. Outflow flux was invariable compared with inflow flux so that extra detention time for media fouling such as back washing is not needed. But the results suggested that appropriate management is necessary for long-term operation of MPC. As the final outcome, MPC using bio organisms is considered to be efficient for stream water purification when they used as substrates for artificial river structure.

• Journal of Korean Society on Water Environment
• /
• v.36 no.3
• /
• pp.206-219
• /
• 2020

As urbanization and impermeable areas have increased, stormwater and non-point pollutants entering the stream have increased. Additionally, in the case of the old town comprising a combined sewer pipe system, there is a problem of stream water pollution caused by the combined sewer overflow. To resolve this problem, many cities globally are pursuing an environmentally friendly low impact development strategy that can infiltrate, evaporate, and store rainwater. This study analyzed the expected effects and efficiency when the LID facility was installed as a measure to improve hydrologic cycle and water quality in the Oncheon stream in Busan. The EPA-SWMM, previously calibrated for hydrological and water quality parameters, was used, and standard parameters of the LID facilities supported by the EPA-SWMM were set. Benchmarking the green infrastructure plan in New York City, USA, has created various installation scenarios for the LID facilities in the Oncheon stream drainage area. The installation and maintenance cost of the LID facility for scenarios were estimated, and the effect of each LID facility was analyzed through a long-term EPA-SWMM simulation. Among the applied LID facilities, the infiltration trench showed the best effect, and the bio-retention cell and permeable pavement system followed. Conversely, in terms of cost-efficiency, the permeable pavement systems showed the best efficiency, followed by the infiltration trenches and bio-retention cells.

• Clean Technology
• /
• v.19 no.3
• /
• pp.295-299
• /
• 2013

This study was purposed and performed to evaluate removal efficiency of non-point source pollution in the process and system based on bio-retention design criteria regulated by EPA. Basic Column Reactors (BCR) were prepared for optimal determinations of inflow rate of first rainfall runoff and composition and ratio of soil layers. Removal efficiencies of non-point source pollution from synthetic runoff and real first rainfall runoff, directly sampled from motor way and parking lot, were analyzed, respectively. Removal efficiency of SS, BOD, COD, T-N, and T-P were all shown to be more than 80%.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.6
• /
• pp.117-122
• /
• 2006

The objective of this study is to analyze the greenroof runoff quantity and delay. The experimental districts, have different soil thickness and vegetation, had installed. A measurement was conducted in Seoul University to investigate the runoff quantity and delay of the greenroof. The measurement point of runoff quality data were 8, located next to each experimental district. Also, the precipitation was measured by rain gauges(# RG2). The experimental investigation lasted from 21th July to 4th December, a total of 137 days. The results showed that the greenroof can contribute runoff retention and delay by soil, but the intensity of actual rain event affected the runoff reduction and delay. Overall, when was the rainy season, percent rainfall retention ranged 17.5% and runoff flow was delayed for 1-3 hours. But on the other hand, when was the typical rain event, percent rainfall retention ranged over 90% and runoff flow was delayed for 1-11 hours. In the result, the greenroof had the greatest runoff retention and delay, while for the typical rain event.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.63-70
• /
• 2014

Part of SB latex in pre-coating color was substituted with newly developed starch-based bio-binder in order to investigate the effect of starch-based bio-binder in pre-coating color on the properties of coating color and coated paper. Smoothness and gloss of coated paper were decreased with the increase of bio-binder substitution ratio. Brightness and whiteness did not show the significant changes, but stiffness was improved with bio-binder. Ink set-off, dry-pick and wet pick were decreased with the increase of bio-binder substitution ratio. In general, when all SB latex is substituted with bio-binder, ink set-off, dry- and wet-pick were deteriorated. However, it was found that if the bio-binder substitution ratio is controlled below 50%, similar qualities with coated paper manufactured by the use of SB latex binder can be obtained.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.125-128
• /
• 2007

In these recent years, low cost and stable battery electrode materials have been studied for HV/HEV application. Spinel cathode material $LiMn_2O_4$ is widely studied as a promising cathode material of lithium ion secondary batteries because of it is low cost, easily to be prepared and capable to be operated in high voltage range. In this study, $LiMn_2O_4$ was undergoing surface modification with spinel lithium titanium oxide by sol-gel method in order to enhance its capacity retention. Properties of both unmodified and surface-modified $LiMn_2O_4$ were characterized by XRD, SEM, particle size analyzer while their cycling performance was tested with charge and discharge tester.