• Journal of the Korean institute of surface engineering
• /
• v.51 no.3
• /
• pp.164-171
• /
• 2018

In this study, we have fabricated pure titanium (Ti)/hydroxyapatite (HA) double layer coating on medical grade PEEK from magnetron sputtering system, an investigation was performed whether the surface can be had more improve bio-active for orthopedi/dental applications than that of non-coated one. Pure Ti and HA coating layer were obtained by a radio-frequency and direct current power magnetron sputtering system. The microstructures surface, mechanical properties and wettability of the pure Ti/HA double layer deposited on the PEEK were analyzed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), nano-indentation, and contact angle test. According to the EDS and XRD results, the composition and crystal structure of pure Ti and HA coated surface were verified. The elastic modulus and hardness value were increased by pure Ti and HA coating, and the pure Ti/HA double layer coating surface has the highest value. The contact angle showed higher value for pure Ti/HA double layered coating specimens than that of non-coated (PEEK) surface.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.114-121
• /
• 2014

We report a polysilicon active area membrane field effect transistor (PSAFET) pressure sensor for low stress deflection of membrane. The PSAFET was produced in conventional FET semiconductor fabrication and backside wet etching. The PSAFET located at the front side measured pressure change using 300 nm thin-nitride membrane when a membrane was slightly strained by the small deflection of membrane shape from backside with any physical force. The PSAFET showed high sensitivity around threshold voltage, because threshold voltage variation was composed of fractional function form in sensitivity equation of current variation. When gate voltage was biased close to threshold voltage, a fractional function form had infinite value at $V_{tn}$, which increased the current variation of sensitivity. Threshold voltage effect was dominant right after the PSAFET was turned on. Narrow transistor channel established by small current flow was choked because electron could barely cross drain-source electrodes. When gate voltage was far from threshold voltage, threshold voltage effect converged to zero in fractional form of threshold voltage variations and drain current change was mostly determined by mobility changes. As the PSAFET fabrication was compatible with a polysilicon FET in CMOS fabrication, it could be adapted in low pressure sensor and bio molecular sensor.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.196-201
• /
• 2012

Electrospinning is a versatile process used to prepare micro or nano sized fibers from various materials dissolved in volatile solvents. This study reports electrospun pullulan fibrous webs fabricated through electrospinning using water as a solvent. The electrospinning conditions such as pullulan (PUL) concentration and applied voltage were optimized in order to obtain smooth electrospun fibers. The concentration of PUL greatly influenced the viscosity and surface tension of PUL solution. PUL beaded electrospun fibers were obtained from PUL solutions with concentrations lower than 5 wt%, while homogenous electrospun fibers were prepared from solutions with high concentration and high viscosity. The average diameters of PUL fibers were decreased to 200 nm when the polymer concentration was kept at 10 wt% and the applied voltage was fixed at 15 kV during electrospinning. PUL electrospun fiber exhibited higher solubility, flexibility, softness and adhesive strength.

• Membrane Journal
• /
• v.22 no.1
• /
• pp.54-61
• /
• 2012

To separate and recover of VOCs, supporting membranes using PEI were prepared by phase separation method and it was coated with PDMS to prepare PEI-PDMS hollow composite membrane. To investigate characteristic of prepared membrane, pure gas permeability was measured using oxygen and nitrogen, the stage cut and permeance property with feed concentration were evaluated using xylene, ethyl benzene, toluene and cyclohexane. Also, to check solvent resistance on VOCs, stress-strain property of membrane with immersion time in solvent were measured by DMA. The permeance value of $O_2$ and $N_2$ showed 63 GPU and 30 GPU respectively. Permeated VOCs concentration was decreased with increasing stage cut. But, conversely, recovery efficiency that was increased with increasing stage cut. As a result of DMA test, the stress and strain were 11.93 MPa and 13.52%, respectively.

• Advances in nano research
• /
• v.7 no.6
• /
• pp.443-457
• /
• 2019

In this investigation, dynamic and bending behaviors of isolated protein microtubules are analyzed. Microtubules (MTs) can be considered as bio-composite structures that are elements of the cytoskeleton in eukaryotic cells and posses considerable roles in cellular activities. They have higher mechanical characteristics such as superior flexibility and stiffness. In the modeling purpose of microtubules according to a hollow beam element, a novel single variable sinusoidal beam model is proposed with the conjunction of modified strain gradient theory. The advantage of this model is found in its new displacement field involving only one unknown as the Euler-Bernoulli beam theory, which is even less than the Timoshenko beam theory. The equations of motion are constructed by considering Hamilton's principle. The obtained results are validated by comparing them with those given based on higher shear deformation beam theory containing a higher number of variables. A parametric investigation is established to examine the impacts of shear deformation, length scale coefficient, aspect ratio and shear modulus ratio on dynamic and bending behaviors of microtubules. It is remarked that when length scale coefficients are almost identical of the outer diameter of MTs, microstructure-dependent behavior becomes more important.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.7
• /
• pp.1096-1103
• /
• 2019

UCB-1 is the commercial rootstock of pistachio. Reproduction of this rootstock by tissue culture is limited by low levels of proliferation rate. Therefore, any compound that improves the proliferation rate and the quality of the shoots can be used in the process of commercial reproduction of this rootstock. Use of plant growth-promoting bacteria is one of the best ideas. Given the beneficial effects of nanoparticles in enhancement of the growth in plant tissue cultures, the aim of the present study was to investigate the effects of nanoencapsulation of plant growth-promoting rhizobacteria (using silica nanoparticles and carbon nanotubes) and their metabolites in improving UCB1 pistachio micropropagation. The experiment was conducted in a completely randomized design with three replications. Before planting, treatments on the DKW medium were added. The results showed that the use of Pseudomonas fluorescens VUPF5 and Bacillus subtilis VRU1 nanocapsules significantly enhanced the root length and proliferation. The nanoformulation of the VUPF5 metabolite led to the highest root length (6.26 cm) and the largest shoot (3.34 cm). Inoculation of explants with the formulation of the metabolites (both bacterial strains) significantly elevated the average shoot length and the fresh weight of plant compared to the control. The explants were dried completely using both bacterial strains directly and with capsule coating after the three days.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.411-419
• /
• 2022

This study conducted acute oral toxicity test and acute dermal toxicity test to evaluate the toxicity of lightweight and high-strength cement composite containing carbon nanotube. It was compared with the toxicity of ordinary concrete that did not contain carbon nanotube. Both lightweight and high-strength cement composite and ordinary concrete were categorized in GHS category 5 as a result of acute oral toxicity test. In addition, no toxic symproms were observed during the acute dermal toxicity test in all specimens, concluding that those were judged to correspond to GHS category 5/unclassified.

• Korean Journal of Acupuncture
• /
• v.29 no.2
• /
• pp.166-178
• /
• 2012

Objectives : This study was purposed to investigate the possibility of traction therapy as treatment method of scoliosis, of which occurrence rate was increasing with teenagers in Korea. Methods : 63 literatures, history, classification, and effectiveness of traction therapy were reviewed and the occurrences rate of scoliosis with teenagers in Korea was investigated. Results : Traction therapy as a treatment method on scoliosis, was originally developed by Hippocrates(460~385 BC), based on the historical record. Traction therapy is classified according to the tools engaged, the postures, the traction methods, and the areas for traction. The opinions on the effect of traction as treatment method were different depending on whether it is in Korea or outside of the country. Within the country, 75% of reports were positive on the effects of traction therapy, while outside of the country, about 74% of reports were negative. On the other hand, the occurrence rates of scoliosis with teenagers in Korea were increasing from 1.46%(1977) to 11.08%(2008). Conclusions : Unfortunately the effects of traction therapy on scoliosis were unclear but it seems to be different in the effects of manipulative therapy and mechanical or apparatus traction therapy. Systematic studies on traction therapy are needed, because of the increasing rate of scoliosis in Korea with teenagers.

• Journal of Pharmacopuncture
• /
• v.15 no.4
• /
• pp.42-51
• /
• 2012

Objectives: This study used the basic principle of Oriental medicine, the sovereign, minister, assistant and courier principle (君臣佐使論) to investigate the effects of the component of ONGABO, which is composed of Ginseng Radix (Red Ginseng), Angelica Gigantis Radix, Schisandrae Fructus, Cuscuta Semen and Curcumae tuber on the viability of HepG2 cells. Methods: Single and mixed extracts of the component of ONGABO were prepared by lypohilizing powder of Red Ginseng (6-year root from Kanghwa), Angelica Gigantis Radix, Schisandrae Fructus, Cuscuta Semen, Curcumae Tuber (from Omniherb Co., Ltd., Korea) at the laboratory of herbal medicine in Woosuk University and were eluted after being macerated with 100% ethanol for three days. The cell viability of HepG2 was determined by using an absorptiometric analysis with PrestoBlue (Invitrogen) reagent after the plate had been incubated for 48 hours. All of the experiments were repeated three times to obtain the average value and standard deviation. The statistical analysis was done and the correlation factor was obtained by using Microsoft Office Excel 2007 and Origin 6.0 software. Results: Although Ginseng Radix (Red Ginseng) and Schisandrae Fructus did not enhance the viability of HepG2 cells, they were shown to provide protection of those cells. On the other hand, Angelica Gigantis Radix decreased the viability of HepG2 cells significantly, Cuscuta Semen and Curcumae Tuber had a small or no effect on the viability of HepG2 cells. Conclusions: In the sovereign, minister, assistant and courier principle (君臣佐使論), Ginseng Radix (Red Ginseng) corresponds to the sovereign component because it provides cell protection effects, Angelica Gigantis Radix corresponds to minister medicinal because it kills cells, Schisandrae Fructus corresponds to the assistant medicinal to help red ginseng having cell protect effects. Cuscuta Semen and Curcumae Tuber correspond to the courier medicinal having no effect in cell viability in HepG2. We hope this study provides motivation for advanced research on the sovereign, minister, assistant and courier principle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.202-202
• /
• 2011

The research of 3-dimensional (3-D) scaffold for tissue engineering has been widely investigated as the importance of the 3-D scaffold increased. 3-D scaffold is needed to support for cells to proliferate and maintain their biological functions. Furthermore, its architecture defines the shape of the new bone and cartilage growth. Polycaprolactone (PCL) has been one of the most promising materials for fabricating 3-D scaffold owing to its excellent mechanical property and biocompatibility. However, there are practical problems for using it, in vitro and in vivo; extracellular matrix components and nutrients cannot penetrate into the inner space of scaffold, due to its hydrophobic property, and thus cell seeding and attachment onto the inner surface remain as a challenge. Thus, the surface modification strategy of 3-D PCL scaffold is prerequisite for successful tissue engineering. Herein, we utilized a mussel-inspired approach for surface modification of 3-D PCL scaffold. Modification of 3-D PCL scaffolds was carried out by simple immersion of scaffolds into the dopamine solution and stimulated body fluid, and as a result, hydroxyapatite-immobilized 3-D PCL scaffolds were obtained. After surface modification, the wettability of 3-D PCL scaffold was considerably changed, and infiltration of the pre-osteoblastic cells into the 3-D scaffold followed by the attachment onto the surface was successfully achieved.