• Clinical and Experimental Vaccine Research
• /
• v.13 no.3
• /
• pp.232-241
• /
• 2024

Purpose: Brucellosis, a zoonotic infectious disease, is a worldwide health issue affecting animals and humans. No effective human vaccine and the complications caused by the use of animal vaccines are among the factors that have prevented the eradication of the disease worldwide. However, bio-engineering technologies have paved the way for designing new targeted and highly efficacious vaccines. In this regard, the study aimed to evaluate immunity induced by mannosylated niosome containing Brucella recombinant trigger factor/Bp26/Omp31 (rTBO) chimeric protein in a mouse model. Materials and Methods: rTBO as chimeric antigen (Ag) was expressed in Escherichia coli BL21 (DE3) and, after purification, loaded on niosome and mannosylated niosome. The characteristics of the nanoparticles were assessed. The mice were immunized using rTBO, niosome, and mannosylated niosome-rTBO in intranasal and intraperitoneal routes. Serum antibodies (immunoglobulin [Ig]A, IgG, IgG1, and IgG2a) and splenocyte cytokines (interferon-gamma, interleukin [IL]-4, and IL-12) were evaluated in immunized mice. Finally, immunized mice were challenged by B. melitensis and B. abortus. A high antibody level was produced by niosomal antigen (Nio-Ag) and mannosylated noisomal antigen (Nio-Man-Ag) compared to the control after 10, 24, and 38 days of immunization. The IgG2a/IgG1 titer ratio for Nio-Man-Ag was 1.2 and 1.1 in intraperitoneal and intranasal methods and lower than one in free Ag and Nio-Ag. Cytokine production was significantly higher in the immunized animal with Ag-loaded nanoparticles than in the negative control group (p<0.05). Moreover, cytokine and antibody levels were significantly higher in the injection than in the inhalation method (p<0.05). Results: The combination of mannosylated noisome and rTBO chimeric proteins stimulate the cellular and humoral immune response and produce cytokines, playing a role in developing the protective acquired immune response in the Brucella infectious model. Also, the intraperitoneal route resulted in a successful enhancement of cytokines production more than intranasal administration. Conclusion: Designing an effective vaccine candidate against Brucella that selectively induces cellular and humoral immune response can be done by selecting a suitable nanoniosome formulation as an immunoadjuvant and recombinant protein as an immune response-stimulating Ag.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.684-689
• /
• 2012

Poly(acrylic acid) (PAA) microspheres is one of the widely-used polymeric materials for the bio-field application and the electric materials. For the synthesis of PAA microspheres, the polymerization technique using surfactants is applied. After the synthesis, the purification and separation processes are required for the removal of surfactant. When general organic solvents were used, many problems, such as huge amount of waste solvent, additional separation processes, and the possibility of residual media, were occurred. Thus, High-pressure Soxhlet extraction using liquid $CO_2$ was developed to solve these problems. In this study, High-pressure Soxhlet extraction of the synthesized PAA microspheres using liquid $CO_2$ was conducted for the removal of Monasil PCA which is used for the dispersion polymerization of acrylic acid in compressed liquid Dimethyl ether (DME). The morphology of the extracted PAA particles was checked by field emission scanning electron microscopy (FE-SEM) and the residual concentration of Monasil PCA was analyzed by inductively coupled plasma - Optical Emission Spectrometer (ICP-OES). For studying the effect of the solvent effect, Soxhlet extraction was conducted using n-hexane, liquid DME, and liquid $CO_2$. In case of n-hexane, some extracted PAA microspheres were produced. However, deformation was also occurred due to the high thermal energy of n-hexane vapor. Liquid DME could not remove Monasil PCA. When using liquid $CO_2$, the extracted PAA microspheres which were free for the residual solvent were produced without deformation. For finding the optimum operating condition, high-pressure Soxhlet extraction was conducted for 8 hours with changing the temperature of reboiler and condenser. When the extractor temperature is $19.6{\pm}0.2^{\circ}C$ and the pressure is $51.5{\pm}0.5$ bar, the best removal efficiency was obtained.

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.340-360
• /
• 2010

The depletion of fossil fuels, ecological problems associated with $CO_2$ emissions climate change, growing world population, and future energy supplies are forcing the development of alternative resources for energy (heat and electricity), transport fuels and chemicals: the replacement of fossil resources with $CO_2$ neutral biomass. Several options exist to cover energy supplies of the future, including solar, wind, and water power; however, chemical carbon source can get from biomass only. When used in combination with environmental friend production and processing technology, the use of biomass can be seen as a sustainable alternative to conventional chemical feedstocks. The biorefinery concept is analogous to today's petroleum refinery, which produce multiple fuels and chemical products from petroleum. A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, and value-added chemicals from biomass. Biorefinery is the co-production of a spectrum of bio-based products (food, feed, materials, and chemicals) and energy (fuels, power, and heat) from biomass [definition IEA Bioenergy Task 42]. By producing multiple products, a biorefinery takes advantage of the various components in biomass and their intermediates therefore maximizing the value derived from the biomass feedstocks. A biorefinery could, for example, produce one or several low-volume, but high-value, chemical or nutraceutical products and a low-value, but high-volume liquid transportation fuel such as biodiesel or bioethanol. Future biorefinery may play a major role in producing chemicals and materials as a bridge between agriculture and chemistry that are traditionally produced from petroleum. Industrial biotechnology is expected to significantly complement or replace the current petroleum-based industry and to play an important role.

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.559-592
• /
• 2012

In spite of the transitional changes in the shoe industry in Busan area, regular academic studies on the management plan to improve the practical competitiveness of footwear industry focused in the materials, bio-dynamics, components, and designs, etc. in the engineering viewpoint are very rare. Many reports of policies were published from late 190's to 2000's but they were limited to the identification of practical situations and the measures for strategic alternatives and were not developed to be the academic studies to improve the competitiveness in terms of management control. It is intended to seek for the measures to be reviewed as the alternatives to improve the self-competitiveness of footwear companies by approaching the problems limited to such specific area in the viewpoint of management control. The core of this study is to provide the alternative plans for expansion of the industrial foundation by seeking for the measures to improve competitiveness with application of knowledge management as an alternative for improvement of not transient but sustainable industrial competitiveness, in order to help the export of shoes from Busan area which has been rapidly increased since the Korea-USA FTA and Korea-EU FTA. In such viewpoint, in the study, a questionnaire survey was performed related with the issues of Busan's footwear industry and the plan to implement knowledge management was discussed for improvement of the competitiveness of footwear industry based on the result of such questionnaire survey. As most of studies and directions have been focused in functional shoes, designs, materials, and components, etc., which are related with the properties of human dynamics, as the alternatives for improvement of the footwear industry of Busan area and did not suggest the measures to make basic changes in the management of companies, the implementation of knowledge management was emphasized in order to seek for the direction of such plan. The purpose of this study is to suggest an alternative for construction of industrial eco-system for high added value by seeking for the probability of knowledge management for conversion of footwear industry into knowledge industry. In order to accomplish the effect of increased export as the result of FTA, current management method of footwear companies is limited and the effect of FTA should be maximized by improving the competitiveness with implementation of knowledge management methods. Settlement of such knowledge management will act as the momentum to improve the competitiveness of footwear companies and, in a long-term viewpoint, will be able to maximize the improvement of knowledge industry and creation of job opportunities.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.125-133
• /
• 2011

This study was conducted on greenhouses whose side heights had been raised after the columns of 1-2W basic type greenhouses had been cut and welding with the same-sized pipes. When the wind load or snow load affects restructured pipe greenhouse like this, those parts will be structurally unsafe. To examine this, the bending strength of welded columns were measured through four stages and compared with the pipes in their original condition. Results are as follows. In the case of a bending test on welded joints about steel pipes used for greenhouses, satisfactory results couldn't be drawn because sections of both ends and the loading parts couldn't endure loads and sank regardless of loading methods. Partial problems could be solved by inserting inside pipe(steel bar) at the sections and the loading parts, but it was necessary to devise more satisfactory bending test methods. The strength of welded joints wasn't much different compared with original conditions and demonstrated only slight differences according to the sample production conditions. However, significant incompleteness in the welding process was expected to cause a decisive loss in strength. On the assumption that there were no problems in the welding process or with regard to the inclination of sub materials for columns after connection, it was deemed reasonable to assume that the strength of welded pipes was about 84~90% of the strength of the pipes in their original condition. Considering mid- and long-term strength decline following the onset of rust at joints or welding sections, structural changes in the main sub materials that are used for greenhouses at farmhouses have to be avoided to ensure structural safety, unless these changes are inevitable.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1565-1576
• /
• 2023

An atmospheric correction algorithm based on the radiative transfer model is required to obtain remote-sensing reflectance (R_rs) from the Geostationary Ocean Color Imager-II (GOCI-II) observed at the top-of-atmosphere. This R_rs derived from the atmospheric correction is utilized to estimate various marine environmental parameters such as chlorophyll-a concentration, total suspended materials concentration, and absorption of dissolved organic matter. Therefore, an atmospheric correction is a fundamental algorithm as it significantly impacts the reliability of all other color products. However, in clear waters, for example, atmospheric path radiance exceeds more than ten times higher than the water-leaving radiance in the blue wavelengths. This implies atmospheric correction is a highly error-sensitive process with a 1% error in estimating atmospheric radiance in the atmospheric correction process can cause more than 10% errors. Therefore, the quality assessment of R_rs after the atmospheric correction is essential for ensuring reliable ocean environment analysis using ocean color satellite data. In this study, a Quality Assurance (QA) algorithm based on in-situ R_rs data, which has been archived into a database using Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Bio-optical Archive and Storage System (SeaBASS), was applied and modified to consider the different spectral characteristics of GOCI-II. This method is officially employed in the National Oceanic and Atmospheric Administration (NOAA)'s ocean color satellite data processing system. It provides quality analysis scores for R_rs ranging from 0 to 1 and classifies the water types into 23 categories. When the QA algorithm is applied to the initial phase of GOCI-II data with less calibration, it shows the highest frequency at a relatively low score of 0.625. However, when the algorithm is applied to the improved GOCI-II atmospheric correction results with updated calibrations, it shows the highest frequency at a higher score of 0.875 compared to the previous results. The water types analysis using the QA algorithm indicated that parts of the East Sea, South Sea, and the Northwest Pacific Ocean are primarily characterized as relatively clear case-I waters, while the coastal areas of the Yellow Sea and the East China Sea are mainly classified as highly turbid case-II waters. We expect that the QA algorithm will support GOCI-II users in terms of not only statistically identifying R_rs resulted with significant errors but also more reliable calibration with quality assured data. The algorithm will be included in the level-2 flag data provided with GOCI-II atmospheric correction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.4
• /
• pp.470-476
• /
• 2014

The purpose of this study was to investigate the effects of sowing time on ecological responses, growth, and yields of cowpeas grown in plastic greenhouses in a southern region of South Korea. Experiments were carried out in Naju, Jeonnam Province (Latitude $35^{\circ}$ 04' N, Longitude $126^{\circ}$ 54' E) during 2012 and 2013. The intermediate-erect type strains used in this study were Jeonnam1 and Jeonnam2. Sowing was performed between mid-March and mid-August at intervals of one month. The days from sowing to emergence was significantly higher for the mid-March sowing (12 days) but no significant differences were observed among the other sowing dates (3 to 4 days). The days from sowing to first flowering were shorter for sowing dates between mid-March and mid-July because sowing time was delayed and then were lengthened again at mid-August sowing; the days were longest at mid-March sowing (around 75 days) and were shortest at mid-July sowing (30 days). The days from first flowering to harvesting were short for the sowing dates between mid-March and mid-May (24 to 28 days) but were relatively long for subsequent sowing dates (35 to 38 days). Stem and peduncle lengths were relatively long for the mid-April and mid-August sowing dates. Main-stem node number was highest for the mid-June sowing. Branch number per plant was highest for the mid-March sowing. The mid-March sowing displayed the highest number of pods per plant as well as the heaviest seed weight. Yield per 10 ares was highest for the mid-March sown Jeonnam1 and the Jeonnam2 strains (340 and 367 kg respectively), and then tended to decrease due to subsequent delays in sowing.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.311-319
• /
• 2014

Early sexual maturation through temperature stimulation was induced in female and male of yezo scallop. Gonadosomatic index (GSI) in female showed $9.12{\pm}2.9$ in January, $14.89{\pm}2.9$ in February and $21.3{\pm}1.4$ in March in experiment I. GSI in experiment I showed a significant increase (P < 0.05) and in experiments II and III were not show significant variations (P > 0.05). It also showed significant between the control and the experiments I, II, and III in February (P < 0.05) measurements. Experiment I has showed good results in sexual maturation and spawning when compared with other experiments II and III and the control. Histological observation showed that ovary condition was in a growing stage in all the experiments I, II, and III. In February, ovary condition through histological observation was a late mature stage in all the experiments I, II, and III except the control of a growing stage. GSI and gonad weight were $4.4{\pm}0.88$ and 2.8 g, respectively in November whereas it was $15.1{\pm}2.8$, and 11.7 g, respectively in January and $21.7{\pm}5.4$, and 19.4 g, respectively in February after rearing at a water bath of $12^{\circ}C$ depending on the condition of experiment I. It was possible early releasing of eggs and sperms of yezo scallop in February instead of the middle of April to the end of May being spawning period. Fertilized eggs have become a gastrula stage through a spiral cleavage and then become a trochophore larvae after 36 hours. After 10 days, D-shaped larvae have changed into an umbo stage larvae and attached to juveniles in the post larvae after 20-23 days.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.321-331
• /
• 2014

Patinopecten yessoensis is known to be farmed only in the northern part of the East Sea today. In an attempt to extend its production area, we have conducted experiments both in the northern and southern parts of the East Sea and studied on their growth in an aim to use the results for increasing overall productivity of the species. Early juvenile scallops producted in February 2014 showed an average shell length of $0.23{\pm}0.002$. The high growth group showed an average shell length and shell height of $4.11{\pm}0.08mm$ and $4.28{\pm}0.09mm$, respectively, in June while they were $23.63{\pm}3.4mm$ and $24.19{\pm}4.5mm$ in October. The low growth group showed an average shell length and shell height of $2.23{\pm}0.7mm$ and $1.99{\pm}0.9mm$, respectively, in June while they were $1.99{\pm}0.9mm$ and $17.59{\pm}4.5mm$ in October. The daily growth rate of the high growth group was 0.037 mm/day and 0.027 mm/day for the low growth group. In August, we measured the shell length of Patinopecten yessoensis from Yangyang-gun, Gangneung-si, Yeongdeok-gun, and Pohang-si. Patinopecten yessoensis from Pohang-si showed the best growth performance with its shell length of $26.90{\pm}3.6mm$. Patinopecten yessoensis from Yeongdeok was the second largest with its shell length of $23.56{\pm}3.4mm$. We presume that optimal water temperature and phytoplankton abundance of the two regions have contributed to the good growth performance of the species.