• Journal of Appropriate Technology
• /
• v.7 no.1
• /
• pp.59-71
• /
• 2021

Hybrid hydrothermal carbonization (Hybrid HTC) technology is a proprietary thermochemical process for two or more organic wastes.The reaction time is less than two hours with temperature range 180~250℃ and pressure range 20~40bar. Thanks to accumulation of the carbon of the waste during Hybrid HTC process, the energy value of the solid fuel increases significantly with comparatively low energy consumption. It has also a great volume reduction with odor removal effect so that it is evaluated as the best solid fuel conversion technology for various organic wastes. In this study of the hybrid hydrothermal carbonization, the effect on the calorific value and yield of Cambodian mango waste were evaluated according to changes in temperature and reaction time. Through the study, parameter optimization has been sought with improving energy efficiency of the whole plant. It is decomposed in the Hydro-Carbonation Technology to Generate Gas. At this time, it is possible to develop manufacturing and production technologies such as hydrogen (H₂) and methane (CH₄). Based on the results of the study, a pilot plant (2t/day) has been proposed for future commercialization purpose along cost analysis, mass balance and energy balance calculations.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.4
• /
• pp.355-364
• /
• 2022

BACKGROUND: Pre-harvest interval and decline pattern of thiamethoxam were determined in kiwifruit using liquid chromatography-tandem mass spectrometry (LCMS/MS). The study was carried out to propose import tolerance using OECD maximum residue limit (MRL) calculator for the export promotion of kiwifruit to Taiwan. METHODS AND RESULTS: The thiamethoxam residue in kiwifruit was determined by using the LC-TriQ-MS/MS with the analytical process to set up the import tolerance under greenhouse conditions for Taiwan. Excellent linearity was observed for all of the analytes with a determination coefficient (R²)≥0.99. The limit of quantification was determined to be 0.01 mg/kg for both thiamethoxam and clothianidin in kiwifruit. Linearity was determined from the co-efficient of determinants (R²) obtained from the seven-point calibration curve. The standard calibration curve showed as follows; 1) Site 1 (Gimje): y = 944,406X + 1,583 (R²=0.9995), 2) Site 2 (Goheung): y = 1,356,205X + 934 (R²=0.9983), and 3) Site 3 (Jangheung): y = 1,239,937X - 3,090 (R²=0.9908). The residue of thiamethoxam in the kiwifruit for three decline trials showed the range of 0.35 to 0.56 mg/kg in site 1 (Gimje), 0.24 to 0.55 mg/kg in site 2 (Goheung), and 0.28 to 0.42 mg/kg in site 3 (Jangheung), respectively. However, clothianidin was not detected in all of the treatments. The maximum residual amounts (decline) in the samples, sprayed according to the safe-use standard for thiamethoxam 10% WG in kiwifruit (30 days before harvest, 3 sprays every 7 days) were 0.56 mg/kg in site 1, 0.55 mg/kg in site 2, and 0.42 mg/kg in site 3, respectively. CONCLUSION(S): The import tolerance (IT) of thiamethoxam for kiwifruit may be proposed to be 0.9 mg/kg by using the OECD MRL calculator.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.21-29
• /
• 2024

In the rapidly advancing information society, electronic devices, including smartphones and tablets, are increasingly digitized and equipped with high-performance features such as flexible displays. This study focused on optimizing the manufacturing process for Transparent Conductive Films (TCF) by using the cost-effective conductive polymer PEDOT and transparent substrate PET as alternatives to expensive materials in flexible display technology. The variables considered are production speed (m/min), coating maximum temperature (℃), and PEDOT supply speed (rpm), with surface resistivity (Ω/□) as the response parameter, using Response Surface Methodology (RSM). Optimization results indicate the ideal conditions for production: a speed of 22.16 m/min, coating temperature of 125.28℃, and PEDOT supply at 522.79 rpm. Statistical analysis validates the reliability of the results (F value: 18.37, P-value: < 0.0001, R²: 0.9430). Under optimal conditions, the predicted surface resistivity is 145.75 Ω/□, closely aligned with the experimental value of 142.97 Ω/□. Applying these findings to mass production processes is expected to enhance production yields and decrease defect rates compared to current practices. This research provides valuable insights for the advancement of flexible display manufacturing.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.148-156
• /
• 2010

S59-4 isolate was evaluated as a potential biocontrol agent using in vivo wounded garlic bulb assay. When the spore suspension ($10^5$ spores/$m\ell$) of Penicillium hirsutum was co-inoculated with cell suspension of S59-4 isolate on wounded garlics, the isolate showed high suppressive effect to disease development. The isolate was identified as Pantoea agglomerans S59-4(Pa59-4) through Biolog system. Furthermore, soaking garlic bulbs in the suspension of Pa59-4 significantly reduced garlic decay caused by P. hirsutum. The optimal concentration of Pa59-4 for controlling garlic blue mold was $10^7\sim10^8$ cfu/$m\ell$. And suppressive effect of Pa59-4 on garlic storage decay reduced as inoculation concentration of Penicillium hirsutum increased. In addition in order to investigate population dynamics of Pa59-4 on application site of garlic cloves, two antibiotic markers, pimaricin and vancomycin were selected. Bacterial density of Pa59-4 on the wounded garlic cloves increased continuously both under room temperature condition and low temperature condition until 30days after application of Pa59-4, meanwhile that of Pa59-4 on intact garlic cloves increased until 15days after application of Pa59-4 and thereafter decreased continuously. Two culture media for mass-production of Pa59-4, LB medium and TSB medium, were selected. By-product of bio-fungicide formulated by mixing white carbon and bacterial suspension of Pa59-4 suppressed by 40 to 50% garlic blue mold. Above results suggest that Pa59-4 be a promising control agent against garlic blue mold.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2287-2300
• /
• 2015

This study examined the spatio-temporal distributions of the phytoplankton community in the coastal waters of Gogunsan Islands (CoWGIs), West Sea of Korea, from January to September 2011. A total of 104 species of phytoplankton belonging to 56 genera were identified. This was low compared to the surrounding seas of the West Sea. In particular, diatoms and dinoflagellates comprised 60.5% and 34.6%, respectively, and it was most diverse in autumn. The standing crops fluctuated from $9.6{\times}10^4cells/L$ to $1.0{\times}10^7cells/L$. This was high in winter and summer and low in spring and autumn. The seasonal dominant species were Skeletonema costatum-like species, Thalassiosira nordenskioeldii, Dactyliosolen fragillisimus, and Chaetoceros debilis in winter, Guinardia delicatula in spring, Eucampia zodiacus, Cylindrotheca closterium, Ch. debilis, and Ch. curvisetus in summer, and S. costatum-like species, Ch. debilis, Ch. curvisetus, G. delicatula, and Leptocylindrus danicus in autumn. The total number of autochthonous and tychopelagic species was 39 species. This showed a 1/3 (33.3%) decrease compared to the 1980's. The chlorophyll a concentration fluctuated from $3.82{\mu}g/L$ in autumn to $13.36{\mu}g/L$ in summer. The bio-oceanographic characteristics of the CoWGIs based on principle component analysis (PCA) showed that it was dominated by the Saemangeum water mass in the high temperature season and by the Geum River water mass in the low temperature season. In other words, there has been a conversion to a closed inner bay followed by the dramatic progress of eutrophication, even in the CoWGIs after completion of the Saemangeum embankment.

• Korean Security Journal
• /
• no.9
• /
• pp.99-131
• /
• 2005

Terrorism which became today's common phenomena over the world is one of the most serious threats the world confront. Although International society make and operate outstanding anti-terrorism system, terror would never end without solving fundamental problems. The main body of terrorism converts from nation to organization and from organization to cell, which makes it difficult for us to recognize the main body. Since the target of today's new terrorism is many and unspecified persons, terrorists will never hesitate to use mass destruction weapons such as nuclear, biological, chemical weapons, and also use cyber-technique or cyber-terrorism. So, effective counter-terrorism measures should be performed as follows. First, it must be better for international society should make long-time plan of solving fundamental problems of terrorism other than to operate directly on terror organization and its means. Second, preventive method should be made. The most effective method of eradicating terrorism is prevention. For this, it is necessary to remove environmental elements of terrorism and terrorist bases, and to stop inflow of money and mass destruction weapons to terrorists. Third, integrated anti-terror organization should be organized and operated for continuous counter-terrorism operations. Also international alliance for anti-terrorism should be maintained to share informations and measures. Fourth, concerned department in the government should prepare counter-terrorism plans in their own parts as follows and make efforts to integrate the plans. - Ministry of Government Administration and Home Affairs : conventional terror - Ministry of Health and Welfare : bio-terror - Ministry of Science and Technology : nuclear-terror Especially, they should convert their policy and operation from post-terror actions to pre-terror actions, designate terror as national disaster and organize integrated emergency response organization including civil, government, and military elements. In conclusion, pre-terror activities and remedy of fundamental causes is the best way to prevent terror. Also, strengthening of intelligence activities, international cooperations, and preventive and comprehensive counter-measures must not ignored.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.437-441
• /
• 2012

This study was conducted to find out the optimum container for increasing acclimatization rate of in vitro mass propagated plantlets of Ever-bearing strawberry (Fragaria ${\times}$ ananassa Duch.) via bioreactor. Four types of containers were used such as transparent plastic container (TPC), plug tray (PT), I-pot (IP), and black vinyl pot (BVP). Number of date maintaining soil water content above 10% was five days in TPC, three to four days in BVP, two days in PT, and one day in IP. Survival rate of plantlets was 80% in BVP, 70% in TPC, 55% in IP, and 15% in PT. In TPC, growth increment of plantlets was the greatest among all the tested containers and the lowest in IP. Numbers of runner per plant were 3.3 in BVP, 2.9 in TPC, 1.6 in PT, and 1.2 in IP. Total cost was 44,405,300 won/10 a in BVP, resulting in reducing more 6,659,400 won/10 a than IP's (51,064,700 won/10 a). Around 102,718 plants/10 a were produced by using BVP, suggesting that 30,265.1 plants/10 a more could be produced than IP (72,452.9 plants/10 a). Production cost per plant was 432.3 won in BVP, resulting in reducing 272.5 won than IP's (704.8 won). As a result, BVP was appropriate for acclimatization of in vitro plantlets through bioreactor system.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.90-99
• /
• 2021

In this study, to reduce the production cost of poly(3-hydroxyalkanoates) (PHA), optimal cell growth and PHA biosynthesis conditions of the isolated strain Pseudomonas sp. EML8 were established using waste frying oil (WFO) as the cheap carbon source. Gas chromatography (GC) and GC mass spectrometry analysis of the medium-chain-length PHA (mcl-PHAWFO) obtained by Pseudomonas sp. EML8 of WFO indicated that it was composed of 7.28 mol% 3-hydrxoyhexanoate, 39.04 mol% 3-hydroxyoctanoate, 37.11 mol% 3-hydroxydecanoate, and 16.58 mol% 3-hydroxvdodecanoate monomers. When Pseudomonas sp. EML8 were culture in flask, the maximum dry cell weight (DCW) and the mcl-PHAWFO yield (g/l) were showed under WFO (20 g/l), (NH4)2SO4 (0.5 g/l), pH 7, and 25℃ culture conditions. Based on this, the highest DCW, mcl-PHAWFO content, and mcl-PHAWFO yield from 3-l-jar fermentation was obtained after 48 hr. Similar results were obtained using 20 g/l of fresh frying oil (FFO) as a control carbon source. In this case, the DCW, the mcl-PHAFFO content, and the mcl-PHAFFO yields were 2.7 g/l, 62 wt%, and 1.6 g/l, respectively. Gel permeation chromatography analysis confirmed the average molecular weight of the mcl-PHAWFO and mcl-PHAFFO to be between 165-175 kDa. Thermogravimetric analysis showed decomposition temperature values of 260℃ and 274.7℃ for mcl-PHAWFO and mcl-PHAFFO, respectively. In conclusion, Pseudomonas sp. EML8 and WFO could be suggested as a new candidate and substrate for the industrial production of PHA.

• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.339-345
• /
• 2008

Farming of the fleshy shrimp Fenneropenaeus chinensis which is a major cultured species in the west coast of South Korea, has been suffered :trom mass mortality due to disease epizootics including viruses. Since the Pacific white shrimp Litopenaeus vannamei was introduced to Korea in 2003, farming of this species has rapidly increased for years, occupying 62.5% of total cultured shrimp production in 2007. However the studies on L. vannamei culture methods for shrimp farming situations in Korea are very limited. Nursery culture of shrimp larvae has some advantages including increased survival, improved feed efficiencies, enhanced growth performance and reduced grow-out period. In this study, L. vannamei postlarvae (${PL_3}-{PL_{10}}$) with a density of $3,750-9,090/m^3$ were cultured in four raceways under limited water exchange condition for 35 days. Survival was the highest (93.6%) in tank stocked with $4,090/m^3$ and was the lowest in tank with $9,090/m^3$ (58.1 %). Mean body weight at harvest ranged from 0.071 to 0.108 g, and FCR was 0.59-0.70 in all tanks. Concentration of total ammonia nitrogen was increased up to 20 ppm on day 10 in all tanks and thereafter gradually decreased by the third week of culture. Nitrite-nitrogen was rapidly increased from the third week, representing bio-floc condition by developed nitrifying bacterial community. Of the present nursery system some modification of structure and consideration for commercial scale are needed in order to be implemented to shrimp farmers.

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.757-769
• /
• 2013

A microorganism producing carboxymethylcellulase (CMCase) was isolated from seawater, identified as Bacillus velezensis by analyses of 16S rDNA and partial sequences of the gyrA, and designated as B. velezensis A-68. The optimal conditions for production of CMCase by B. velezensis A-68 were established using response surface methodology (RSM). The optimal concentrations of rice hulls and yeast extract, and initial pH of the medium for cell growth were 60.2 g/l, 7.38 g/l, and 7.18, respectively, whereas those for production of CMCase were 50.0 g/l, 5.00 g/l, and 7.30. The analysis of variance (ANOVA) implied that the most significant factor for cell growth as well as production of CMCase was yeast extract. The optimal concentrations of $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$, and $(NH_4)_2SO_4$ in the medium for cell growth were 7.50, 1.00, 0.10, and 0.80 g/l, respectively, which were the same as those for production of CMCase. The optimal temperatures for cell growth and production of CMCase were 30 and $35^{\circ}C$, respectively. The maximal production of CMCase under optimized conditions was 83.8 U/ml, which was 3.3 times higher than that before optimization. In this study, rice hulls, agro-byproduct, were developed as a substrate for production of CMCase and time for production of CMCase was reduced to 3 days using a newly isolated marine bacterium.