• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.325-326
• /
• 2010

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.245-250
• /
• 2019

Milli-scale crawling robots have been widely studied due to their maneuverability in confined spaces. For successful crawling, the crawling robots basically required to fulfill alternating gait with elliptical foot trajectory. The alternating gait with elliptical foot trajectory normally generates both forward and upward motion. The upward motion makes the aerial phase and during the aerial phase, the forward motion enables the crawling robots to proceed. This simultaneous forward and upward motion finally results in fast crawling speed. In this paper, we propose a novel alternating mechanism to make a crab-inspired eight-legged crawling robot. The key design strategy is an alternating mechanism based on double four-bar linkages. Crab-like robots normally employs gear-chain drive to make the opposite phase between neighboring legs. To use the gear-chain drive to this milli-scale robot system, however, is not easy because of heavy weight and mechanism complexity. To solve the issue, the double-four bar linkages has been invented to generate the oaring motion for transmitting the equal motion in the opposite phase. Thanks to the proposed mechanism, the robot crawls just like the real crab with the crawling speed of 0.57 m/s.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.264-269
• /
• 2019

This paper presents mechanical design and control of a bio-inspired legged robot. To achieve a fast legged running mechanism, a novel linkage leg structure is designed based on hind legs of domestic cats. The skeletomuscular system and parallel leg movement of a cat are analyzed and applied to determine the link parameters. The hierarchical control architecture is designed according to the biological data to generate and modulate desired gaits. The effectiveness of the leg mechanism design and control is verified experimentally. The legged robot runs at a speed of 46 km/h, which is comparatively higher speed than other existing legged robots.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.103-110
• /
• 2020

Bio-inspired underwater robots have been studied to improve the dynamic performance of fins, such as swimming speed and efficiency, which is the most basic performance. Among them, bio-inspired soft robots with a compliant tail fin can have high degrees of freedom. On the other hand, to improve the driving efficiency of the compliant fins, the stiffness of the tail fin should be changed with the driving frequency. Therefore, a new type of variable stiffness mechanism has been developed and verified. This study, which was inspired by the anatomy of a real dolphin, assessed a process of designing and manufacturing a robotic dolphin with a variable stiffness mechanism. By mimicking the vertebrae of a dolphin, the variable stiffness driving part was manufactured using subtractive and additive manufacturing. A driving tendon was placed considering the location of the tendon in the actual dolphin, and the additional tendon was installed to change its stiffness. A robotic dolphin was designed and manufactured in a streamlined shape, and the swimming speed was measured by varying the stiffness. When the stiffness of the tail fin was varied at the same driving frequency, the swimming speed and thrust changed by approximately 1.24 and 1.5 times, respectively.

• The Journal of Korea Robotics Society
• /
• v.13 no.2
• /
• pp.97-102
• /
• 2018

A small and lightweight crawling robots have been actively studied thanks to their outstanding mobility and maneuverability. Those robots can navigate into more confined spaces that larger robots are unable to reach or enter such as debris and caves. In this paper, we propose a milli-scale hexapedal robot based on planar linkage design. To make this possible, two necessary conditions for successful crawling are satisfied: thrust force from the ground and aerial phase while running. These conditions are achieved through a newly developed leg design. The robot has a pair of legs and each leg has three feet. Those feet alternatively moves based on 1DOF planar linkage. This linkage is installed at each side of the robot and finally the robot shows the alternating gait and aerial phase during running. As a result, the robot runs with the crawling speed of 0.9 m/s.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.912-916
• /
• 2018

Crawling robots are advantageous in overcoming obstacles. These robots have characteristics such as light weight and outstanding mobility. In case of large robots, they have difficulties passing narrow gaps or entering the cave. In this paper, we propose a milli-scale hexapedal robot using 4-bar linkages. Two conditions are necessary to enable efficient walking. In short, the trajectory of the foot must be elliptical, and the lowest point of the foot should be the same. These conditions are satisfied with a novel leg design. The robot has a pair of three legs and the legs are coupled to operate simultaneously. Each set of the legs are installed to robot's both sides and the legs satisfy the equal lowest foot point and elliptical trajectory. As a result, this hexapedal robot can crawl with 0.56m/s speed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.3
• /
• pp.193-200
• /
• 2012

Mobility is one of the most important issues for search and rescue robots. To increase mobility for small size robot we have focused on the mechanism and algorithm inspired from centipede. In spite of small size, using many legs and flexible long body, centipede can overcome high obstacles and move in rough terrains stably. This research focused on those points and imitated their legs and body that are good for obstacle negotiation. Based on similarity of a centipede's legs and tracks, serially connected tracks are used for climbing obstacles higher than the robot's height. And a centipede perceives environments using antennae on its head instead of eyes. Inspired from that, 3 IR sensors are attached on the front, top and bottom of the first module to imitate the antenna. Using the information gotten from the sensors, the robot decides next behavior automatically. In experiments, the robot can climb up to 45 cm height vertical wall and it is 600 % of the robot's height and 58 % of the robot's length.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.270-277
• /
• 2019

Inspired by small insects, which perform rapid and stable locomotion based on body softness and tripod gait, various milli-scale six-legged crawling robots were developed to move rapidly in harsh environment. In particular, cockroach's leg compliance was resembled to enhance the locomotion performance of the crawling robots. In this paper, we investigated the effects of changing leg compliance for the locomotion performance of the small light weight legged crawling robot under various payload condition. First, we developed robust milli-scale six-leg crawling robot which actuated by one motor and fabricated in SCM method with light and soft material. Using this robot platform, we measured the running velocity of the robot depending on the leg stiffness and payload. In result, there was optimal range of the leg stiffness enhancing the locomotion ability at each payload condition in the experiment. It suggests that the performance of the crawling robot can be improved by adjusting stiffness of the legs in given payload condition.

• International Journal of Computer Science & Network Security
• /
• v.21 no.2
• /
• pp.110-119
• /
• 2021

The Coronavirus or COVID-19 is contagiousness virus that infected almost every single part of the world. This pandemic forced a major country did lockdown and stay at a home policy to reduce virus spread and the number of victims. Interactions between humans and robots form a popular subject of research worldwide. In medical robotics, the primary challenge is to implement natural interactions between robots and human users. Human communication consists of dynamic processes that involve joint attention and attracting each other. Coordinated care involves sharing among agents of behaviours, events, interests, and contexts in the world from time to time. The robotics arm is an expensive and complicated system because robot simulators are widely used instead of for rehabilitation purposes in medicine. Interaction in natural ways is necessary for disabled persons to work with the robot simulator. This article proposes a low-cost rehabilitation system by building an arm gesture tracking system based on a depth camera that can capture and interpret human gestures and use them as interactive commands for a robot simulator to perform specific tasks on the 3D block. The results show that the proposed system can help patients control the rotation and movement of the 3D arm using their hands. The pilot testing with healthy subjects yielded encouraging results. They could synchronize their actions with a 3D robotic arm to perform several repetitive tasks and exerting 19920 J of energy (kg.m².S^-2). The average of consumed energy mentioned before is in medium scale. Therefore, we relate this energy with rehabilitation performance as an initial stage and can be improved further with extra repetitive exercise to speed up the recovery process.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.6
• /
• pp.596-601
• /
• 2011

Autonomous navigating algorithms for mobile robots have been proved to be a difficult task. Based on the excellent homing performance shown by many insects, bio-inspired navigation algorithms for robotic experiments have been widely researched and applied to the design of navigational strategies for mobile robots. In this paper, among them, we analyze two simple landmark navigation methods their strengths and limits. We investigate the effect of the occlusion problem mainly, which is an important yet tough problem in many landmark navigation algorithms. In the point of view of the error of homing vector and the performance of the homing paths in the environment with artificial occlusions, we investigate the effect of occlusion problem in both methods in order to further study on solutions.