• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.27-35
• /
• 2013

Cotton linter pre-treatment methods using electron beam and sulfuric acid were investigated to prepare high quality regenerated fibers for fabrics. So far, NaOH was used to reduce the degree of polymerization (DP) of the cotton linter for ease of dissolving by cellulose solvent. Two pre-treatment methods were developed to reduce the consumption of the chemicals (NaOH) and to control the DP of cellulose more precisely. Changes in ${\alpha}$-cellulose contents and brightness by the pre-treatments were also important concerns. Both electron beam irradiation and sulfuric acid were shown to be effective on controlling the DP of cellulose and to reduce the chemical consumption, but reduced ${\alpha}$-cellulose contents as well in this study. Sulfuric acid pre-treatment, which needed additional washing process after the pre-treatment when comparing to the electron beam irradiation method, gave the highest brightness and the highest reduction of ${\alpha}$-cellulose content.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.4
• /
• pp.237-244
• /
• 2016

This paper investigates the possibility to increase the economic value of the thinned young apple trough fermentation process. It is studies the optimal fermentation condition of thinned young apple by manipulating preparation treatment and sugar content. To do this following steps are done. Firstly, different preparation treatment for thinned young apple such as whole apple, cutting apple, and blending apple were done. The different sugar content such as $24^{\circ}Brix$, $15^{\circ}Brix$ and $4^{\circ}Brix$ was added. Secondly, the sugar contents and pH level were measured during fermentation process. Finally, statistical analysis was used to examine the relation between the preparation treatment, sugar content and pH level during the fermentation process. The experimental result shows that the different preparation treatment influences to the fermentation process. The blending apple treatment gave lower pH level compared to other kind treatments. The sugar content of thinned young apple was decrease during the fermentation process. The statistical analysis shows that the manipulation preparation treatment and sugar content affect the final pH level and whole fermentation process. Experimental result shows that the thinned young apple fermentation could be proposed as new alternative product in the market. The best fermentation process was obtained from blending thinned young apple treatment with $24^{\circ}Brix$.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.603-609
• /
• 2002

DFA IV is di-D-fructose-2,6':6,2'-dianhydride, consisting of two fructose residues. It can be enzymatically synthesized from levan by levan fructotransferase, and can be used for mineral absorption. Understanding of the structure and composition of levan is important to obtain high-level production of DFA IV. A bacterial strain, Pseudomonas aurantiaca 5-4380, was identified to produce low-branched levan, and the levansucrase gene (lsch) from this bacterium was found to be composed of 1,275 Up coding for a protein of 424 amino acids, with an estimated molecular weight of 47 kDa. The bacterial levansucrase gene was expressed in Escherichia coli DH5${\alpha}$ by its own promoter and lac promoter. The recombinant levansucrase was produced in soluble form with 170U of levansucrase activity from 1-ml E. coii culture broth. The expressed enzyme from the clone showed similar biochemical properties, such as size of active levansucrase, degree of branching, and optimum temperature, with P.aurantiaca 5-4380 levansucrase.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.401-407
• /
• 2010

In this study, computer simulations were conducted to assess the use of a circulating concurrent-flow dryer for rapeseed drying and to determined the effect of this drying method on the germination ratio of rapeseed after the drying process was complete. The simultaneous heat and mass transfer between air and rapeseed in a concurrent-flow dryer was examined by simulation. The drying simulation was based on several parameters with sequent time series. Equations concerning air psychrometrics, physical properties, thermal properties, equilibrium moisture content, thin layer drying of rapeseed, etc. were all combined to solve the simulation models. Based on energy and mass transfer in the concurrent-flow drying model, a simulation program for the circulating concurrent-flow rapeseed dryer was built along with a detailed description of the mathematical solution to the model. A pilot scale circulating concurrent-flow dryer(200 kg/batch) was used to verify the fitness of the simulation program. A comparison between the experimental data and the model predicted results was presented and discussed. The drying parameters and germination ratio were analyzed and the accuracy of the simulation program was evaluated. The simulation program proved to be reliable and was shown to be a convenient tool for predicting rapeseed drying and germination ratio of rapeseed in a concurrent-flow dryer.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.17-23
• /
• 2013

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.267-276
• /
• 2018

A Hoffman 3D Brain Phantom was used to evaluate two PET/CT scanners, BIO_40 and D_690, according to the radiation dose of CT (low, medium and high) at a fixed kilo-voltage-peak (kVp) with the tube current(mA) varied in 17~20 stages(Bio_40 PET/CT scanner: the tube voltage was fixed to 120 kVp, the effective tube current(mAs) was increased from 33 mAs to 190 mAs in 10 mAs increments, D_690 PET/CT scanner: the tube voltage was fixed to 140 kVp, tube current(mA) was increased from 10 mAs to 200 mAs in 10 mAs increments). After obtaining the PET image, an attenuation correction was conducted based on the attenuation map, which led to an analysis of the difference in the image. First, the ratio of white to gray matter for each scanner was examined by comparing the coefficient of variation (CV) depending on the average ratio. In addition, a blind test was carried out to evaluate the image. According to the study results, the BIO_40 and D_690 scanners showed a <1% change in CV value due to the tube current conversion. The change in the coefficients of white and gray matter showed that the Z value was negative for both scanners, indicating that the coefficient of gray matter was higher than that of white matter. Moreover, no difference was observed when the images were compared in a blind test.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.1
• /
• pp.61-69
• /
• 2019

All the parts of lotus, including the seed, rhizome, leaf, stalk, petal, anther, pericarp, and fruit receptacle, have been used in traditional medicine system as a health beneficial supplement. However the most usually used from lotus plant is only the root. Therefore in this study, it will be discussed more the utilization of other parts of the lotus, namely the flower of lotus. The petals and stamens of lotus actually are also rich in bioactive components such as flavonoids and alkaloids, are used in the treatment of tissue inflammation, cancer, skin disease, and also for us as antidotes. One of the biotechnological process that can be used to improve the nutritional content, sensory, and also antioxidant activities is fermentation process. The final product desired from the fermentation process in this study is vinegar. The microbial strain powder used is Uinkin fermented powder with three variations of fermentation. The variations given in this study were initial sugar 32%, 24%, and 14% with the same fermentation temperature, $35^{\circ}C$ for 3 months. The results obtained showed that the pH value and sugar content of products during the fermentation process were decreasing during the fermentation process, with total polyphenol content of $283.7{\pm}97.6mg/100g\;QAE$, and total flavonoid content of $3.3{\pm}0.0mg/100g\;QAE$. For the DPPH radical scavenging ability of the fermentation product also increased in a concentration dependent manner, with ORAC activity of the product showed a high activity of $20.7{\pm}0.41{\mu}M$ TE. Therefore, fermentation process can be the one of method for improving the product. The efficiency of lotus flower vinegar fermentation can be reached with an initial sugar condition of 25% (sample B).

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.917-926
• /
• 2020

Friction mechanisms is a very important role in the industrial machinery. However, many experiments have been conducted to reduce the loss of energy resources and parts used due to friction because the friction force adversely affects parts, efficiency, noise, and the like of the power unit. Therefore, in this study, the friction coefficient according to the characteristics of the lubricant was measured to find out which Grease Lubricant maintains the low friction coefficient without being most affected by external conditions. A total of five grease lubricants were tested in this study: GHP CAL 301, GHP EP 2, GHP KG 10, GHP HPG 2, and GHP HTG 2. And the friction coefficient was conducted by changing the load conditions (2, 4, 6, 8, 10N) and rotational speed (24, 48, 67, 86, 105, 124, 143, 162vrpm) using a pin-on-disk wear test system. Also, duty number were calculated. As a result, it was confirmed that in all grease lubricants, the speed did not significantly affect the friction coefficient, and it was confirmed that in all lubricants, the size of the friction coefficient decreased as the load increased from a small load to a large load. In addition, it was determined from the experimental results that GHP EP 2 is the most suitable as a grease lubricant and GHP CAL 301 is not the most suitable.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.443-449
• /
• 2022

In this study, in order to improve the disadvantages of the environmental error of the infusion set that performs infusion therapy in the existing clinical practice and to maximize the user's convenience by miniaturizing the existing infusion pump system, the structure of the muscle pump of the human vein was imitated. As a double check valve method, a method for preventing the backflow of fluid and discharging a constant fluid in one direction by external pressure was proposed. The proposed bio-mimic muscle pump uses a check valve that controls the flow of fluid in one direction and a silicone tube with elasticity, and a chamber is constructed. A peristaltic pump for applying intermittent pressure to the tube chamber was constructed using a multi-cam structure roller. In order to verify the performance of the proposed pump, optimization was performed while changing the number of multi-cam rollers and adjusting the speed of the roller driving motor, and the reproducibility of the instantaneous discharge amount and the continuous discharge amount of the pump was compared and tested. The performance of the muscle pump proposed in this study was verified through experiments that it can inject up to 1L of fluid within 12 hours, and that it is possible to inject the fluid with an accuracy of ±0.1ml. Real-time monitoring of the fluid injection volume through the bio-mimic muscle pump proposed in this study not only increases the convenience of the administrator, but also provides a precise fluid administration environment to more patients at a low cost, and additionally applies bubble detection and occlusion detection technology If so, it is believed that a safer medical environment can be provided to patients.

• Nutrition Research and Practice
• /
• v.16 no.4
• /
• pp.435-449
• /
• 2022

BACKGROUND/OBJECTIVES: Cheonggukjang is a traditional fermented soybean paste with significant health-promoting effects. On the other hand, there have been insufficient studies on the safety and efficacy of Cheonggukjang, which is produced using traditional methods containing toxins and biogenic amines (BAs). This study compared the laxative effect of Cheonggukjang, containing high or low levels of toxins and BAs (HTBC or LTBC) in a loperamide (Lop)-induced constipation mouse model. MATERIALS/METHODS: To induce constipation, Lop (5 mg/kg) was administered orally to ICR mice twice a day for 4 days, and the dose was increased to 8 mg/kg after a 3-day rest period. Cheonggukjang (500 mg/kg, HTBC, or LTBC respectively) was administered for four weeks before the Lop treatment. RESULTS: The number of stools, fecal weight, water contents, gastrointestinal transit, and histological alterations were recovered significantly in the HTBC or LTBC groups. HTBC and LTBC administration did not induce significant changes in body weight, dietary intake, and behavior. The opioid-receptor downstream signaling pathway in colon tissues was also evaluated. The c-Kit, stem cell kinase, and mitogen-activated protein kinases subfamilies, including extracellular signal-regulated kinase 1/2, c-Jun N-terminal kinases, and p38, were all downregulated in the HTBC or LTBC-administered mice colon compared to the Lop group. CONCLUSION: These results show that Cheonggukjang, containing high levels of toxins and BAs, have a similar laxative effect in a mouse model of Lop-induced constipation.