• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.39-56
• /
• 2009

Vibration is an undesirable phenomenon in a dynamic system like lightly damped aerospace structures and active vibration control has gradually been employed to suppress vibration. The objective of the current investigation is to introduce an active torsional magneto-rheological (MR) fluid based damper for vibration control of a typical nose landing gear. They offer the adaptability of active control devices without requiring the associated large power sources. A torsional damper is designed and developed based on Bingham plastic shear flow model. The numerical analysis is carried out to estimate the damping coefficient and damping force. The designed damper is fabricated and an experimental setup is also established to characterize the damper and these results are compared with the analytical results. A typical FE model of Nose landing gear is developed to study the effectiveness of the damper. Open loop response analysis has been carried out and response levels are monitored at the piston tip of a nose landing gear for various loading conditions without damper and with MR-damper as semi-active device. The closed-loop full state feedback control scheme by the pole-placement technique is also applied to control the landing gear instability of an aircraft.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.13-21
• /
• 2001

Electrorheological(ER) fluid is a kind of smart material with variable shear stress and dynamic viscosity under various electric field intensity. Electric field can control the damping characteristics of ER damper. The objective of this study is the analysis of the performance of ER damper and its application to shock absorber. Idealized nonlinear Bingham plastic shear flow model is used to predict the velocity profile between electrodes. Cylindrical dashpot ER damper with moving electrode is constructed and tested under various electric fields. The analytic and experimental results for damping force are compared and discussed. Drop test system using ER damper is prepared to identify transient vibration characteristics. The rebound is eased as the applied electric field increases. When semi-active control algorithm is applied, rebound phenomenon disappears and vibration energy level decays faster than the case of zero electric field.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2706-2711
• /
• 1994

In this work, an experimental type of torque converter has been constructed and its characteristics have been evaluated by adapting an electrorheological fluid(ERF) as an operating medium. The device was designed by using the equations which were proposed by Carlson et al. The correlation between the rheological behaviour of an ERF and mechanical parameters of the clutch has been investigated. The torque generated by an ERF in this device is sum of one due to the yield strength by polarizing dispersed particles in dielectric oil and one due to the viscous drag. The experimental results are presented in terms of torque and current density as a function of rotational speed at various electric field strength applied. Experimental results showed that the measured torque was rapidly increased with the increase of the electric field, generally being proportional to the rotational speed of the motor. The measured current was shown to be increased with the increased electric field. Also, the current was decreased with the increase of increased with the increased electric field. Also, the current was decreased with the increase of the rotational speed of the motor and reached plateau region after f = 5 Hz.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.344-349
• /
• 2012

This paper presents a new small-sized damper featuring magneto-rheological (MR) fluid which can be applied to vibration control system. The proposed MR damper consists of cylinder, piston, a couple of bearings, oil-seals and magnetic circuit which has two coils. In this damper, approximately 5cc of MR fluid is used. The damping force of the MR damper is designed to be followed by linear shear-mode Bingham-plastic model. In order to verify the performance of the MR damper, an experimental apparatus is established. In the experimental test, the damping force of the MR damper is measured with respect to time, displacement and velocity. In addition, the time response of MR damper is measured when 1A of step current is applied. Finally, The proposed small MR damper is applied to vibration control. In this process, a simple 1-DOF system is modeled and controlled using PID controller.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1121-1127
• /
• 2012

This paper presents a new small-sized damper featuring magneto-rheological(MR) fluid which can be applied to vibration control system. The proposed MR damper consists of cylinder, piston, a couple of bearings, oil-seals and magnetic circuit which has two coils. In this damper, approximately 5cc of MR fluid is used. The damping force of the MR damper is designed to be followed by linear shear-mode Bingham-plastic model. In order to verify the performance of the MR damper, an experimental apparatus is established. In the experimental test, the damping force of the MR damper is measured with respect to time, displacement and velocity. In addition, the time response of MR damper is measured when 1A of step current is applied. Finally, the proposed small MR damper is applied to vibration control. In this process, a simple 1-DOF system is modeled and controlled using PID controller.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.543-548
• /
• 2013

이 논문은 세탁기의 진동제어를 위한 MR 댐퍼의 설계과정을 제시한다. 이 연구에서는 MR 댐퍼의 작은 크기와 함께 높은 댐핑력과 저전력을 소비하도록 설계되었다. MR 댐퍼는 전단모드를 사용하도록 제안되었고 빙햄모델을 이용하여 최설설계를 진행하였다. 이 과정에서 멀티코일이 댐핑력을 높이기 위해 적용되었고 최적화된 구조를 찾아내기 위하여 APDL을 이용하여 최적설계가 수행되었다. 이 후 최적의 수치 값들을 통해 제작하여 실험을 수행하였다. 이 때 슬라이딩모드 제어기를 적용하여 시뮬레이션과 제어실험을 모두 수행하였다. 실험의 결과로부터 MR 댐퍼가 세탁기의 진동제어를 위한 요구 댐핑력을 만족시켜줌을 확인하였다.

• 콘크리트학회논문집
• /
• 제27권5호
• /
• pp.511-519
• /
• 2015

콘크리트의 유동성을 평가하기 위해서는 주로 테이블 플로우, 슬럼프 및 유하시간 측정 등의 방법이 이용된다. 하지만 이러한 방법은 시험 조건이 바뀌면 정확한 비교분석이 어렵기 때문에 정량적 변수로 표현되는 레올로지를 이용하여 콘크리트의 유동성을 평가하는 연구가 증가하고 있다. 한편, 시장의 요구에 따라 AAS 결합재에 대한 수요는 증가하고 있으나, AAS 결합재의 레올로지에 대한 연구는 전무한 실정이다. 따라서 이 논문에서는 물/결합재 비와 알칼리 활성화제 유형에 따른 AAS 페이스트의 레올로지 특성을 분석하고자 한다. 테이블 플로우와 유하시간을 측정하여 AAS 페이스트의 유동성을 평가하였고, 레올로지 시험을 통해 전단속도에 따른 전단응력을 분석하였다. 레올로지 시험결과를 Bingham model로 가정하여 레올로지 정수를 도출하고 유동성 평가 시험과의 상관관계를 분석하였다. 결과적으로, 테이블 플로우와 항복응력, 유하시간과 소성점도와의 관계식을 제시하였다. 연구결과를 기반으로, AAS 모르타르 및 콘크리트를 제작하는데 참고자료로 제시하고자 한다.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.29-37
• /
• 2014

Non-Newtonian fluid mechanics takes charge of an important role in the oil industries. Especially in the oil well drilling process, the drilling fluid such as mud keeps the drill bit cool and clean during drilling, with suspending drill cuttings and lubricating a drill bit. The purpose of this study is to examine the effect of fluid mud rheological properties to predict different characteristics of non-Newtonian fluid in the mud mixing tank on offshore drilling platforms. In this paper, ANSYS fluent package was used for the simulation to solve the hydrodynamic force and to evaluate mud mixing time. Prediction of the power consumption and the pumping effectiveness has been presented with different operating fluid models as Newtonian and non-Newtonian fluid. The comparison between Newtonain mud model and non-Newtonian mud model is confirmed by the CFD simulation method of drilling mud mixing tank. The results present useful information for the design of the drilling mud mixing tanks and provide some guidance on the use of CFD tool for such non-Newtonian fluid flow.

• 한국건축시공학회지
• /
• 제19권2호
• /
• pp.113-121
• /
• 2019

SWCNT는 매우 뛰어난 역학적 성능을 가지고 있고. 이로 인해 각종 첨단 소재의 보강재료로서 각광받고 있다. 그러나 완전한 형태의 SWCNT는 소수성을 가지고 있고. 서로간에 Van der Waals 인력으로 결합되어 물에 분산이 어렵다. 본 연구에서는 SWCNT를 시멘트 복합체에 활용하기 위하여, 분산된 용액 형태로 제조하여 시멘트 복합체에 활용하고자 하였고, 이를 위한 계면활성제로 DOC 및 SDS를 선정하였다. 초음파 처리 및 초원심분리를 통해 제조된 SWCNT 수용액을 이용하여 시멘트 페이스트를 제조하여 이의 전단응력 vs. 전단변형률 관계를 확인하고, 이를 통해 소성점도 및 항복응력을 도출하였다. 본 연구의 결과에 따르면 SWCNT를 혼입하지 않은 DOC 및 SDS는 공기연행제와 유사한 유변학적 효과를 발휘하는 것으로 나타났다. DOC 2wt%를 이용해서 제조된 SWCNT 수용액으로 배합된 시멘트 페이스트는 플레인 시멘트 페이스트와 거의 유사한 유변학적 거동을 하는 것으로 나타났으나, SDS 1%를 이용해서 제조된 SWCNT 수용액으로 배합된 시멘트 페이스트는 플레인 시멘트 페이스트와 상이한 유변학적 거동을 하는 것으로 나타났다.