• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.647-652
• /
• 2004

In aqueous tape casting of alumina slurry systems, the relationships between the suspension compositions and the defects of the dried tapes were discussed. The suspensions compositions were controlled with the ratios of the solids, water and organics binder contents. The effects of the thickness of dried tape and kinds of binder system were also examined. In the defect free region, the apparent viscosity showed nearly same value due to the count balancing effect of solid and organic binder content on the apparent viscosity. When water content was constant, increasing solid led to decrease of organic binder content. The defect free region was narrowed with increasing of casting thickness. When linear type acrylic emulsion binders system (D1000 and D 1035) were used, defect free zone formed the belt type in the triangle of solid, water and organic binder content according to the line of constant water contents. However the defect free region was not found in the cross-link type emulsion binder system (D 1050).

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.621-622
• /
• 2006

In this paper, we show some experimental results of binder-free WC sintered by Pulsed Electric Current Sintering (PECS) also known as Field Assisted Sintering Technology (FAST). These binder-free WC have extremely hardness and stiffness. However, these mechanical properties are dependent on the sintering condition, e.g., maximum temperature, applied pressure, etc. We show some relationship between mechanical properties and sintering condition to improve to sinter the binder-free WC.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.207-215
• /
• 2001

Plastic bonded explosive(PBX) is mainly composed of the nitramine-ploymer compositions. PBX is characterized by high velocity and pressure of detonation, low vulnerability and good thermal stability. Many important applications of PBX require the good adhesion between nitramine crystals and the binder. For PBXs as well as propellants, where good mechanical properties are of great importance, dewetting therefore must be prevented by strong adhesion between filler-binder. Adhesion depends on surface characteristics of filler and binder. In order to design for better adhesion, an understanding of the surface properties of explosive and binder is required. The surface free energies are calculated from contact angle values by the method of Kaelble. Critical surface tension of solids are calculated by Zisman plot. Critical surface tension is a useful parameter for characterizing the wettability of solid surface. In this study, HMX and 3 kinds of copolymers are selected, since they are widely used in many plastic bonded explosives. The technical objective of this investigation is to predict the interaction between filler and binder from their surface free energies.

• 전기화학회지
• /
• 제5권4호
• /
• pp.178-182
• /
• 2002

The electrochemical behavior of binder-free carbon anode, comprising of only artificial and natural graphite (AG and NG) particles, for intercalation and deintercalation of lithium ion $(Li^+)$ in aluminum chloride (AICI_3)-I-ethyl­3-methylimidazolium chloride (EMIC)-lithium chloride (LiCl)-thionyl chloride $(SOCI_2)$ room-temperature molten salt (RTMS) was studied. Binder-free carbon electrodes were fabricated using electrophoretic deposition (EPD) method. The binder-free carbon anodes provided a relatively flat charge and discharge potentials $(0\;to\;0.2V\;vs.\;Li/Li^+)$ and current capabilities $(250-340mAh{\cdot}g^{-1})$ for the intercalation and deintercalation of $Li^+$. Stability of the binder-free carbon anodes for intercalation and deintercalation of 50 cycles was confirmed.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.219-230
• /
• 2000

Plastic bonded explosive(PBX) is mainly composed of the nitramine explosives, RDX, HMX, and polymer binders. When the adhesion between nitramine crystals and binder is not particularly strong and can be failed under stress, dewetting occurs rather suddenly and this leads to a significant drop in tensile strength of explosives. Mechnical property of plastic bonded explosive depends on the surface characteristics of filler and binder. In order to design for better adhesion, an understanding of the surface properties of explosive and binder is essential. In this study, 2 kinds of RDX and 4 kinds of ethylene vinyl acetate copolymers are selected, since they are widely used in many plastic bonded explosives. The technical objective of this investigation is to calculate for the surface free energy of RDX and EVA using theory of Fowkes, van Oss, Neumann approaches and Kaelble equation and to predict the interaction between filler and binder from their surface free energies.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.1-6
• /
• 2005

In aqueous alumina tape casting, the effects of altering the composition of the suspensions, the binders and the casting thickness were studied. The rheological behavior of the suspensions and the defects of the dried tapes were examined and the relationships between them are discussed. The changes in the defect regions reported in the previous paper were related with the rheological properties with variations of the binder, the composition and the casting thickness. The shear thinning factor increased with the organic content and the solid content (the decrease of water content). The apparent viscosity increased with the shear thinning factor. The relation between the shear thinning factor and the log apparent viscosity was similar for all binder types. In the relation between the defect free region and the rheological properties, the defect free region became narrower with increasing casting thickness. The defect free region is independent of binder type. Therefore, the thicker tape is more difficult to produce in aqueous alumina tape casting. Knowledge of the rheological properties of the suspensions could help Predict the defect type and the possibility of defect free dried tapes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.336-337
• /
• 2007

The energy conversion characteristics of $TiO_2$ paste of dye-sensitized solar cell (DSSC) was investigated. In the case of DSSC without a binder, the current density increased due to the development of porosity. As for DSSC with a binder, the fill factor increased due to the development of network among the particles. The energy conversion efficiency of 7.2% was obtained due to the porosity and the network as for DSSC with the mixed binder (Vol. 50:50).

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권1호
• /
• pp.85-92
• /
• 2021

본 연구는 액상폴리머인 에폭시수지를 이용한 고내구성 폴리머 시멘트계 재료를 개발할 목적으로 고로슬래그미분말 치환율을 20%로 고정하고, 4종류의 알칼리 활성화제를 이용한 경화제 무첨가 에폭시수지 혼입 폴리머 시멘트 모르타르를 제작하여, 강도 특성, 에폭시수지 경화도, 흡수율, 내황산성, 중성화 및 염화물이온 침투저항성을 검토한 것이다. 그 결과, 알칼리 자극제의 종류에 관계없이, 고로슬래그 미분말 20%를 사용한 경화제 무첨가 EMM의 압축강도는 폴리머 결합재비 10%에서 최댓값을 나타냈으며, 폴리머 결합재비 20%에서는 에폭시수지의 경화도 감소와 함께 압축강도 또한 감소하는 것으로 나타냈다. 휨강도는 압축강도와 마찬가지로 수산화칼슘을 첨가한 것이 가장 우수하게 나타났으며, 폴리머 결합재비의 증가와 함께 증가하였으며, 모두 9.0 MPa 이상의 휨강도를 발현하였다. 알칼리 자극제의 종류에 관계없이, 경화제 무첨가 EMM의 방수성, 중성화 및 염화물이온 침투저항성은 폴리머 결합재비의 증가와 함께 현저히 개선되었으며, 4종류의 알칼리 자극제 가운데 수산화칼슘을 첨가한 모르타르가 가장 우수한 것으로 나타났다. 한편, 알칼리 자극제의 종류에 관계없이, 경화제 무첨가 EMM의 내황산성은 폴리머 결합재비의 증가와 함께 떨어졌는데, 이것은 폴리머 결합재비의 증가에 따른 에폭시수지의 미경화 에폭시수지의 증가에 기인한 것으로 판단된다. 4가지 알칼리 자극제의 종류에 대하여 물성 및 내구성을 비교 검토한 결과, 수산화칼슘을 첨가한 것이 가장 우수한 것으로 확인되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.119-126
• /
• 2018

최근 화력발전소에서는 순환유동층 연소방식의 발전소가 증가하는 추세이다. 순환유동층 보일러애시는 탈황 효과를 위해 석회석을 첨가함에 따라 애시 중에 포함되는 CaO, $SO_3$성분이 증가하여 일반적인 플라이애시 보다 free-CaO 함량이 높다. 또한 순환유동층 보일러애시는 기존의 플라이애시와 다르게 자기수경성 특성과, 높은 free-CaO함량에 의해 물과 만나면 높은 반응성을 갖는다. 본 연구는 순환유동층 보일러애시의 자기수경성 특성을 이용하여, 시멘트를 대체할 수 있는 비소성 결합재로써 활용 가능성에 대해 분석하였다. 순환유동층 보일러 애시의 함량에 따른 역학적 및 수화특성에 대해 검토하였다. 또한 석고의 종류 및 함유량에 따른 순환유동층 보일러애시 활용 비소성 결합재에 대한 압축강도 및 미세구조에 미치는 영향을 분석하였다.

• 한국분말재료학회지
• /
• 제1권2호
• /
• pp.119-198
• /
• 1994

The characteristics of various important microstructural factors of WC-base hard- metals (cemented carbides) such as the amount of Co metal binder phase, the carbide grain size, the microstructural defects acting as a fracture source, the solid solubility of tungsten in the binder phase affected by the carbon content, the precipitation of $Co_3W$, the domain size of binder phase, the formation of ${\beta}-free$ layer or Co-rich layer and CVD or PVD coated layer, and the effects of these factors on the flexural strength of the hardmetals are reviewed.