• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.426-433
• /
• 1986

This experiment was carried out to investigate the competitive ability and the interaction of each species in ten mono-and binary-associations of four forage species; orchardgrass, tall fescus, ladino clover, and alfalfa. Each species was grown in intra- and interspecific stands in large pots for one year. And samplings of shoot and root were taken in Spring, Summer, and fall clipping stages. Intra- and interspecific competition was compared and evaluated by expected yield, aggressivity, relative yield total(RYT), compensation index(CI), general combining ability(GCA), and specific combining ability (SCA) with shoot and root dry matter production of each species in monoculture and binary mixture. The forage yield was high in two grass species and the mixture of them, but low in two legume species and the mixture of them. The mixture of tall fescue-ladino clover was evaluated as a productive association with a high PYT(1.05) and a high SCA(0.79), and tall fescue was a more aggressive species in it. Each of grass-grass and legume-legume mixture was less aggressive between two species and lower SCAs than grass-legume mixtures. Especially, orchardgrass was the most agressive species and alfalfa was the least, but tall fescue had the highest GCA and ladino clover had the lowest in shoot competition. Also in root, tall fescue- ladino clover mixture was a good match with a high RYT(l.12) and a high SCA (0.60), and orchardgrass was highest in aggressivity. However, orchardgrass had the highest GCA in root while tall fescue had the highest in shoot.

• Korean Journal of Materials Research
• /
• v.16 no.9
• /
• pp.533-537
• /
• 2006

The effects of binary solvent mixtures with various ratios of toluene and ethanol on the properties of slurries and green sheets were investigated. Viscosity of slurry was changed by varying the ratio of solvent mixture which affected the solubility of binder. The relative solvency behavior of a solvent mixture could be predicted with the Hildebrand solubility parameter(${\delta}$) and hydrogen bonding index( ${\gamma}$). The minimum viscosity, the best dispersion of binder, was reached at the composition of toluene:ethanol=4:6, which corresponded to our forecast. The mechanical properties of green sheets related to evaporation of solvents were influenced by the composition of the solvent mixture. At the azeotrope the skin was formed on a drying cast during the drying process because of fast evaporation. At a range of concentrations over 50wt% toluene, green sheets could not be fully dried at low temperature due to excessive toluene. The mechanical properties of green sheets were excellent at the azeotrope-like composition of toluene:ethanol=4:6 which has a little excess of toluene over the azeotrope.

• Environmental Analysis Health and Toxicology
• /
• v.22 no.1 s.56
• /
• pp.27-36
• /
• 2007

Cyanides and dichlorophenols were important pollutants in industrial effluents of steel, petroleum, plastics, pesticides, synthetic dye and/or fiber manufacturing. The toxic effects of cyanide and 3, 5-dichlorophenol in the unary and binary solutions to Vibrio fischeri were determined using the newly developed $N-tox^{(R)}$ bioassay system. This bioassay system relies upon the attenuation of light intensity emitted by Vibrio fischeri exposed to various pollutants including metals and organic compounds. Most of studies dealing with toxicity of pollutants concerned single chemical species, while the organisms were typically exposed to pollutant mixtures. The present study showed that the toxicity of some binary combinations of cyanide and 3, 5-dichlorophenol significantly was lower than the predicted toxicity from the addicted model. This antagonistic interaction was well explained by chemical interaction model presented in this study.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.311-318
• /
• 2013

This paper deals with a noise reduction algorithm which uses the binary masking in the time-frequency domain. To improve speech intelligibility in noise, noise-masked speech is decomposed into time-frequency units and mask "0" is assigned to masker-dominant region removing time-frequency units where noise is dominant compared to speech. In the previous research, Gaussian mixture models were used to classify the speech-dominant region and noise-dominant region which correspond to mask "1" and mask "0", respectively. In each frequency band, data were collected and trained to build the Gaussian mixture models and detection procedure is performed to the test data where each time-frequency unit belongs to speech-dominant region or noise-dominant region. In this paper, we consider the correlation of masks in the frequency domain and propose a post-processing method which exploits the Viterbi algorithm.

• Journal of the Korean Chemical Society
• /
• v.41 no.2
• /
• pp.63-68
• /
• 1997

Calorimetric measurements have been carried out for the binary mixture between protic, ROH (R=Me, Et) and dipolar aprotic solvents, MeCN,$Me_2CO,\;MeNO_2(or EtNO_2)$in order to investigate the molecular interaction and liquid structure of isodielectric solvents. From the measured partial molar enthalpies of the solutions, excess enthalpies for the mixing process were determined. The hydrogen bond strength between two components decreases in the order of$ROH-ROH>ROH-Me_2CO>ROH-MeCN>ROH-MeNO_2(or EtNO_2)$and the hydrogen bond donor acidity decreases in the order of MeOH>EtOH. From this result, we can conclude that the most important interaction for the formation of binary liquid mixture comes from the specific hydrogen bond.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.307-313
• /
• 2014

In this study, an optimization process design has been performed to separate 99.9 mol% of Isobutyl Acetate from binary azeotropic mixture of Isobutyl Acetate and Isobutyl Alcohol system using a Pressure Swing Distillation (PSD). PSD is used to separate binary azeotropic mixtures using the difference between the relative volatilities and azeotropic compositions by changing the system pressure. Non-Random Two Liquid (NRTL) model for liquid phase and the Peng-Robinson equation for vapor phase are used. An optimization study for the reflux ratio and feed stage locations which minimize the total reboiler heat duties are studied. Since PSD process consists of two columns, i.e. high pressure and low pressure, the effect of column sequence on the optimum conditions is reported.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.162-171
• /
• 1993

This paper deals with the anisotropy of the mushy region during solidification process of a binary mixture. A theoretical model which specifies a permeability tensor in terms of pricipal values is proposed. Also, the governing equations are modified into convenient forms for the numerical analysis with the existing algorithm. Some test computations are performed for soeidification of aqueous ammonium chloride solution contained in a square cavity. Results show that not only the present model is capable of resolving fundamental characteristics of the tranport phenomena, but also the anisotropy significantly affects the interdendritic flow structure, i.e., double-diffusive convection and macrosegregation patterns.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.893-900
• /
• 1997

In this study, vapor-liquid equilibria of a binary system, which consists of glycerol and water, are measured using a vaporrecirculating modified Othmer still at various subatmospheric pressures. The constituent components of the binary system considered in this study exhibit a large difference in the boiling temperatures. Since it is generally observed that the properties of a mixture greatly differ from those of the pure components, the phase equilibrium characteristics of a mixture can not be predicted from the properties of the pure components. Furthermore, an abrupt increase in the boiling temperature occurs as the concentration of the higher boiling component exceeds a certain value. Therefore, it is essential to acquire realistic phase equilibrium data of the mixture for industrial applications. Using the UNIQUAC model, the experimental vapor-liquid equilibrium data are correlated with good accuracy. The thermodynamic consistency test is also performed to ensure soundness of the data.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.295-300
• /
• 2010

A binary system of 1-propanol and bromochloromethane which exhibits an azeotropic point and a considerable nonideal phase behavior probably due to the large boiling point difference is not amenable in the actual chemical processes such as the distillation tower and absorber. Therefore, experimental data of phase behavior data of this mixture are indispensable in understanding the inherent thermodynamic characteristics for an efficient application of the system in the industrial processes. In this work, the isobaric vapor-liquid equilibrium of a binary mixture consisting of 1-propanol and bromochloromethane was measured by using a recirculating equilibrium cell at various pressures ranging from 30 to 70 kPa. The measured VLE data were correlated in a satisfactory manner by using the UNIQUAC and NRTL models along with the thermodynamic consistency test based on Gibbs/Duhem equation. In addition, the excess molar volume of the mixture was also measured by using a vibrating densitometer and correlated with a Redlich-Kister polynomial.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.1-8
• /
• 2016

The autoignition temperature (AIT) of a substance is the lowest temperature at which the vapor ignites spontaneously from the heat of the environment. The AIT is important index for the safe handling of flammable liquids which constitute the solvent mixtures in the process. This study measured the AITs of n-butanol+p-xylene mixture by using ASTM E659 apparatus. The AITs of n-butanol and p-xylene which constituted binary system were $340^{\circ}C$ and $557^{\circ}C$, respectively. The experimental AITs of n-butanol+p-xylene mixture were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation).