• Archives of Pharmacal Research
• /
• v.9 no.2
• /
• pp.75-79
• /
• 1986

The effect of phenothiazine derivatives on the thermotropic transition of liposomal lipid bilayer made of dipalmitoyl phosphatidylchline and dipalmitoyl phosphatidic acid was investigated with differential scanning calorimetry. The thermograms of the liposomal bilayer incorporated with levomepromazine, chlopromazine, prochloperazine, perphenazine and fluphenazine were obtained and the size of cooperative unit of the transition were calculated from the ratio of the van't Hoff enthalpy change to the calculated enthalpy change of the transition. The results showed that incorporation of phenothiazine derivatives into the liposomal bilayer reduced the transition temperature at which the transition from solid state to liquid-crystalline state occurs, and broadened the thermogram peaks. Phenothiazine derivatives also significantly reduced the size of cooperative unit of the transition. The effect of the drugs was proportional to the concentration of the drug in the bilayer. This means that phenothiazine derivatives might have significant fluidizing effects on the biomembrane. The sizes of cooperative unit were successfully corrlated with phar-macological activities of the drugs and the surface pressure increases of lipid monolayer by these drugs. These correlations might be ascribed to a possible hydrophobic nature of interaction between the biomembrane and the drugs involved in their pharmacology.

• YAKHAK HOEJI
• /
• v.38 no.2
• /
• pp.131-139
• /
• 1994

Calcein-encapsulated small unilamellar vesicles of various lipid composition were prepared using the sonication technique, and their stabilities at $20^{\circ}C$ were examined by measuring calcein leakage from the liposomes. The fluidity of these liposomal bilayers was also investigated by measuring the fluorescence polarization of DPH labelled into the liposomes. The results showed that liposomes made of PC mixtures with different acyl chain length were very stable, which may be due to the formation of interdigitated bilayer structure. The addition of cholesterol further stabilized these PC liposomes. However, addition of cholesterol reduced the encapsulation efficiences of liposomes. The fluidity of the liposomes was significantly decreased by cholesterol in the liquid crystalline state, but not changed in the gel state. These results suggest that the enhanced stability of PC mixture liposomes may be ascribed to the formation of stable interdigitated bilayer structure. In membrane-mimetic and drug-delivery studies, vesicles made of mixtures of various phospholipids are recommended instead of addition of cholesterol to the phospholipid.

• Journal of Adhesion and Interface
• /
• v.25 no.1
• /
• pp.169-274
• /
• 2024

Recent attention has been drawn to materials that undergo reversible expansion and contraction in response to external stimuli, leading to morphological changes. These materials hold potential applications in various fields including soft robotics, sensors, and artificial muscles. In this study, a novel material capable of responding to high temperatures for protection or encapsulation is proposed. To achieve this, liquid crystal elastomer (LCE) with nematic-isotropic transition properties and polyimide (PI) with high mechanical strength and thermal stability were utilized. To utilize a solution process, a dope solution was synthesized and introduced into micro-printing techniques to develop a two-dimensional pattern of LCE/PI bilayer structures with sub-millimeter widths. The honeycomb-patterned LCE/PI bilayer mesh combined the mechanical strength of PI with the high-temperature contraction behavior of LCE, and selective printing of LCE facilitated deformation in desired directions at high temperatures. Consequently, the functionality of selectively and reversibly encapsulating specific high-temperature materials was achieved. This study suggests potential applications in various actuator fields where functionalities can be implemented across different temperature ranges without the need for electrical energy input, contingent upon molecular changes in LCE.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.799-806
• /
• 2016

We present a polarization-dependent prism array film for controlling the viewing angle distribution of liquid crystal (LC) display panels without loss of light efficiency. On a directional backlight unit, our polarization-dependent prism array film, made into a stacked bilayer with a well-aligned liquid crystalline reactive mesogen (RM) layer on the UV-imprinted prism structure, can continuously control the light refraction function of the prism array by electrically switching incident polarization states of a polarization-controlling layer prepared by a twisted nematic LC mode. The viewing angle control properties of the polarization-dependent prism array film are analyzed under different prism angle and refractive index conditions of the RM layer. A simple analytic model is also presented to describe the intermediate viewing angle distributions with continuously varying applied voltages and incident polarization states.

• BMB Reports
• /
• v.37 no.4
• /
• pp.460-465
• /
• 2004

A 16-residue polypeptide model with the sequence acetyl-YALSLAATLLKEAASL-OH was derived by rational de novo peptide design. The designed sequence consists of amino acid residues with high propensity to adopt an alpha helical conformation, and sequential order was arranged to produce an amphipathic surface. The designed sequence was chemically synthesized using a solid-phase method and the polypeptide was purified by reverse-phase liquid chromatography. Molecular mass analysis by electro-spray ionization mass spectroscopy confirmed the correct designed sequence. Structural characterization by circular dichroism spectroscopy demonstrated that the peptide adopts the expected alpha helical conformation in 50% acetonitrile solution. Liposome binding assay using Small Unilamellar Vesicle (SUV) showed a marked release of entrapped glucose by interaction between the lipid membrane and the tested peptide. The channel-forming activity of the peptide was revealed by a planar lipid bilayer experiment. An analysis of the conducting current at various applied potentials suggested that the peptide forms a cationic ion channel with an intrinsic conductance of 188 pS. These results demonstrate that a simple rational de novo design can be successfully employed to create short peptides with desired structures and functions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.581-584
• /
• 2003

Most modeling about dynamic behavior of Antiferroelectric Liquid Crystal (AFLC) is limited to the hysteric characteristics of AFLC cells or thresholdless switching of frustrated AFLC cells. In this paper, domain growth of AFLC cells is modeled with extended bilayer model. When driving pulses that consist of a selection voltage, a bias voltage, and a reset voltage are applied to the AFLC cell, its dynamic behavior is simulated.

• Journal of the Korean Ceramic Society
• /
• v.55 no.6
• /
• pp.576-580
• /
• 2018

In this study, a small amount of CoO was added to commercial Gd-doped $CeO_2$ (GDC) powder. The CoO addition greatly enhanced sinterability at low temperatures, i.e., more than 98% of relative density was achieved at $1,000^{\circ}C$. When GDC/8YSZ (8 mol% yttrium stabilized zirconia) bilayers were sintered, Co-doped GDC showed excellent adhesion to the YSZ electrolyte. Transmission electron microscope (TEM) analysis showed that there were no traces of liquid films at the grain boundaries of GDC, whereas liquid films were observed in the Co-doped GDC sample. Because liquid films facilitate particle rearrangement and migration during sintering, mechanical stresses at the interface of a bilayer, which are developed based on different densification rates between the layers, might be reduced. In spite of $Co^{2+}$ doping in GDC, the electrical conductivity was not significantly changed, relative to GDC.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.271-275
• /
• 2009

This paper describes the out-of-plane order of a liquid crystalline(LC) methacrylate copolymer(3) comprised of a methacrylate(1) with a 4-styrylpyridine moiety as the photo-cyclodimerizable group and a benzoate moiety as the mesogenic group in the side chain, and another methacrylate(2) with a 4-(4-methoxyphenyl)benzoate moiety as the mesogenic group. The composition of 1 and 2 units in 3 was estimated to have a molar ratio of 54.2:45.8 by $^{1}H$ NMR spectroscopy. The X-ray diffraction study revealed that the copolymer forms a partial bilayer smectic structure. The copolymer gave rise to a high out-of-plane order parameter of about 0.74 in a wide LC temperature range of $110{\sim}160^{\circ}C$ after linearly polarized, UV light irradiation and subsequent annealing. Moreover, the external reflection IR analysis indicated that excess UV-light irradiation makes the out-of-plane LC structure of the copolymer appear in a higher and wider temperature range.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3223-3226
• /
• 2013

Spherical phospholipid-bilayers, vesicles, were prepared using the layer-by-layer double emulsion technique, which allows the bilayer to be formed asymmetrically. On the outer layer of the vesicles, the phospholipase D (PLD) reacted to convert phosphatidylcholine (PC) to phosphatidic acid (PA). The reaction induced the curvature change of the vesicles, which eventually led to rupture. The response time from the time of PLD injection to the time of rupture was measured against different vesicle curvatures and the outer layer phase, using the fluorescence intensity change of a pH-sensitive dye encapsulated within the vesicles. The effect of the vesicle curvature on the response was observed to be more significantly dramatic at the solid phase, compared to the liquid phase. Furthermore, in the solid phase, the response time was faster for 80 and 155 nm vesicles and, slower for 605 nm vesicles than similarly sized vesicles in the liquid phase vesicles. This difference in the response time was thought to result from the configuration determined by the phase difference and the PLD behavior.

• Molecules and Cells
• /
• v.22 no.3
• /
• pp.328-335
• /
• 2006

Imperatoxin A ($IpTx_a$), a 3.7 kDa peptide from the African scorpion Pandinus imperator, is an agonist of the skeletal muscle ryanodine receptor (RyR1). In order to study the structure of the toxin and its effect on RyR1, $IpTx_a$ cDNA was PCR-amplified using 3 pairs of primers, and the toxin was expressed in E. coli. The toxin was further purified by chromatography, and various point mutants in which basic amino acids were substituted by alanine were prepared by site-directed mutagenesis. Studies of single channel properties by the planar lipid bilayer method showed that the recombinant $IpTx_a$ was identical to the synthetic $IpTx_a$ with respect to high-performance liquid chromatography mobility, amino acid composition and specific effects on RyR1. Mutations of certain basic amino acids ($Lys^{19}$, $Arg^{23}$, and $Arg^{33}$) dramatically reduced the capacity of the peptide to activate RyRs. A subconductance state predominated when $Lys^8$ was substituted with alanine. These results suggest that some basic amino acid residues in $IpTx_a$ are important for activation of RyR1, and that $Lys^8$ plays an important role in regulating the gating mode of RyR1.