• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.194-201
• /
• 2003

This study presents the comparative filtration performance evaluation of automotive fuel filters based on the theory of Beta ratio. For the experiments, the fuel component's test stand incorporating the multi-pass filtration test circuit was developed. A mathematical description of filtration process in general was derived. And the theoretical basis of multi-pass test and the test procedure were described in detail. Experimental results revealed that domestic fuel filter tested could not maintain consistent Beta ratio, that is filtration efficiency, although it had the holding capacity of contaminants close to the specification at maximum pressure drop across the filter assembly. The results of experiments and simulations also showed that filtration system model could be refined including desorption ratio to estimate the variable Beta ratio in service life.

• Asia-Pacific Journal of Business
• /
• v.10 no.3
• /
• pp.37-51
• /
• 2019

In this paper, we investigate the performance of anomaly factors in Asia-Pacific Stock market and show the higher Sharpe ratio of the volatility managed smart beta portfolio. The smart beta portfolio combines the benefit of passive strategy and active strategy. However, the smart beta portfolios are seems to be exposed to the risk of anomaly factors from the perspective of traditional financial equilibrium model. Therefore, the smart beta strategy may generate negatively skewed returns unappealing to investors having lower risk tolerance. Our empirical investigations find that the return of the Asia-Pacific region stock market is more volatile than other regions with the lower efficiency ratio. However, the value factor and the momentum factor of Asia-Pacific region both show good performances. More interestingly, we also find that managing the volatility of the momentum factor in Asia-Pacific stock market almost doubles the efficiency ratio.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.205-213
• /
• 2003

This study describes the mathematical equation of drawdown test model and introduces the experimental test apparatus and procedure to estimate the desorption rate ratio of a filter. The characteristics of a hydraulic filtration system of drawdown test were demonstrated by numerical simulation for various properties of filters and operation conditions. Experiments for three kinds of fuel filters were conducted according to the proposed test method. And the test results of desorption rate ratio were compared with those values anticipated in precedent multipass filtration tests. Experimental results revealed the validation of drawdown test method proposed in this study. Domestic fuel filter yielded high desorption rate ratio comparing with other foreign products, which means that the Beta ratio decreases a lot during the test. The results also showed that filtration system model could be developed including desorption rate ratio to estimate the variable Beta ratio in service life.

• Fashion & Textile Research Journal
• /
• v.1 no.4
• /
• pp.387-392
• /
• 1999

The effects of the ratio of warp diameter to filling diameter (${\beta}$-ratio) and warp thread crash on the crimp factor and the yarn curvature were studied theoretically in this paper. The models of 2/2 twill fabric derived square cloth and sinusoidal curved cloth were used for the theoretical analysis. The crimp factors (C) for the models were given theoretically as follows; (1) Derived square cloth(general equation for b) $$C=\frac{(1+{\beta})({\theta}-sin{\theta})}{(1+{\beta})sin{\theta}+{\alpha}}$$ (2) Sihusoidal curved cloth $$C=\frac{(1+{\beta})sin{\theta}\[1+\{\frac{{\pi}(1-cos{\theta})}{4sin{\theta}}\}^2\]+{\alpha}}{(1+{\beta})sin{\theta}+{\alpha}}-1$$ The curvatures(${\kappa}$) for the models were given theoretically as follows; (1) Derived square cloth $${\kappa}=\frac{2}{d_w+d_f}$$ (2) Sinusoidal curved cloth $${\kappa}=\|{^{\;\;\prime\prime} \atop r}(s)\| \\ where \;s=\frac{p^'}{{\pi}}\(u+\frac{k^2u}{4}+\frac{k^2}{8}sin2u\)$$.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.31-36
• /
• 2013

${\beta}$-SiC powders were synthesized by a carbothermal reduction process using $SiO_2$-C precursors fabricated by a sol-gel process using phenol resin and TEOS as starting materials for carbon and Si sources, respectively. The C/Si molar ratio was selected as an important parameter for synthesizing SiC powders using a sol-gel process, and the effects of the C/Si molar ratio (1.4-3.0) on the particle size, particle size distribution, and yield of the synthesized ${\beta}$-SiC powders were investigated. It was found that (1) the particle size of the synthesized ${\beta}$-SiC powders decreased with an increase in the C/Si molar ratio in the $SiO_2$-C hybrid precursors, (2) the particle size distribution widened with an increase in the C/Si molar ratio, and (3) the yield of the ${\beta}$-SiC powder production increased with an increase in the C/Si molar ratio.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.2
• /
• pp.29-37
• /
• 2019

Purpose DMIDR(Discovery Molecular Imaging Digital Ready, General Electric Healthcare, USA) is a PET/CT scanner designed to allow application of PSF(Point Spread Function), TOF(Time of Flight) and Q.Clear algorithm. Especially, Q.Clear is a reconstruction algorithm which can overcome the limitation of OSEM(Ordered Subset Expectation Maximization) and reduce the image noise based on voxel unit. The aim of this paper is to evaluate the performance of reconstruction algorithms and optimize the algorithm combination to improve the accurate SUV(Standardized Uptake Value) measurement and lesion detectability. Materials and Methods PET phantom was filled with $^{18}F-FDG$ radioactivity concentration ratio of hot to background was in a ratio of 2:1, 4:1 and 8:1. Scan was performed using the NEMA protocols. Scan data was reconstructed using combination of (1)VPFX(VUE point FX(TOF)), (2)VPHD-S(VUE Point HD+PSF), (3)VPFX-S (TOF+PSF), (4)QCHD-S-400((VUE Point HD+Q.Clear(${\beta}-strength$ 400)+PSF), (5)QCFX-S-400(TOF +Q.Clear(${\beta}-strength$ 400)+PSF), (6)QCHD-S-50(VUE Point HD+Q.Clear(${\beta}-strength$ 50)+PSF) and (7)QCFX-S-50(TOF+Q.Clear(${\beta}-strength$ 50)+PSF). CR(Contrast Recovery) and BV(Background Variability) were compared. Also, SNR(Signal to Noise Ratio) and RC(Recovery Coefficient) of counts and SUV were compared respectively. Results VPFX-S showed the highest CR value in sphere size of 10 and 13 mm, and QCFX-S-50 showed the highest value in spheres greater than 17 mm. In comparison of BV and SNR, QCFX-S-400 and QCHD-S-400 showed good results. The results of SUV measurement were proportional to the H/B ratio. RC for SUV is in inverse proportion to the H/B ratio and QCFX-S-50 showed highest value. In addition, reconstruction algorithm of Q.Clear using 400 of ${\beta}-strength$ showed lower value. Conclusion When higher ${\beta}-strength$ was applied Q.Clear showed better image quality by reducing the noise. On the contrary, lower ${\beta}-strength$ was applied Q.Clear showed that sharpness increase and PVE(Partial Volume Effect) decrease, so it is possible to measure SUV based on high RC comparing to conventional reconstruction conditions. An appropriate choice of these reconstruction algorithm can improve the accuracy and lesion detectability. In this reason, it is necessary to optimize the algorithm parameter according to the purpose.

• Preventive Nutrition and Food Science
• /
• v.20 no.2
• /
• pp.110-118
• /
• 2015

This study was performed to investigate changes in the content and purity, as well as physical characteristics of ${\beta}$-glucan extracted from acid hydrolyzed whole grain barleys. Waxy and non-waxy barleys (Hordeum vulgare) were hydrolyzed with different concentrations of HCl (0.1~0.5 N) for 1 h. As the HCl concentration increased, the contents of total and soluble ${\beta}$-glucan from acid hydrolyzed barley decreased. However the ratio of soluble/total ${\beta}$-glucan content and purities of ${\beta}$-glucan significantly increased. The ratio of ${\beta}-(1{\rightarrow}4)/{\beta}-(1{\rightarrow}3)$ linkages, molecular weight, and viscosity of soluble ${\beta}$-glucan of raw barleys were 2.28~2.52, $6.0{\sim}7.0{\times}10^5g/mol$, and 12.8~32.8 centipoise (cP). Those of isolated soluble ${\beta}$-glucan were significantly decreased to 2.05~2.15, $6.6{\sim}7.8{\times}10^3g/mol$, and 3.6~4.2 cP, respectively, with increasing acid concentration. The re-solubility of raw barley ${\beta}$-glucan was about 50%, but increased to 97% with increasing acid concentration. Acid hydrolysis was shown to be an effective method to produce ${\beta}$-glucan with high ratio of soluble ${\beta}$-glucan content, purity, water solubility, and low viscosity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1468-1472
• /
• 2007

The present study was carried out to determine the optimum conditions of different factors (ratio of lard to water, ${\beta}$-CD concentrations, mixing temperature, mixing time and mixing speed) on cholesterol reduction from lard by using crosslinked ${\beta}$-CD. Crosslinked ${\beta}$-CD was prepared with adipic acid. When the lard was treated under different conditions, the range of cholesterol removal was 91.2 to 93.0% with 5% crosslinked ${\beta}$-CD, which was not significantly different among treatments. In a recycling study, cholesterol removal with crosslinked ${\beta}$-CD in the first trial was 92.1%, which was similar to that with new crosslinked ${\beta}$-CD. In up to eight time trials, over 90% of cholesterol removal was found. The present study indicated that the optimum conditions for cholesterol removal using crosslinked ${\beta}$-CD were a 1:3 ratio of lard to water, 5% crosslinked ${\beta}$-CD concentration, $40^{\circ}C$ mixing temperature, 1 h mixing time and 150 rpm mixing speed. In addition, crosslinked ${\beta}$-CD made by adipic acid resulted in an effective recycling efficiency.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.416-422
• /
• 1989

The particle size of synthesized SiC powders was decreased with increasing carbon content when the mixture of carbon and silica was carbonized at 1, 45$0^{\circ}C$ after hydrolysis of the mixture with the ranges of 3.1 to 3.5 in the mole ratio of Carbon/Alkoxide. The reacted fraction of $\beta$-SiC nearly had nothing to do with the mole ratio of Carbon/Alkoxide. When the reaction was made by adding 0.5wt% additives in the composition of 3.1 in the mole ratio of carbon/alkoxide, the additives decreased the yield of $\beta$-SiC and its sequence was Ba2O3>B>Fe>Al>Al2O3>Si. The effect of additives promoted the transformation of $\beta$-SiC to $\alpha$-SiC form and shwoed the increasing tendency of lattice constant. The two colors of $\beta$-SiC powder came out : one was the black grey with addition of Al, Al2O3 and B the other the light grey with addition of Fe, B2O3 and Si.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.265-269
• /
• 1997

An inclusion complex of muscone with ${\beta}-cyclodextrin$ (CD), as a solid form of muscone, was prepared to increase the solubility of muscone. The molar ratio of muscone to ${\beta}-CD$ in complex was in the range of $1:1{\sim}1:5$ when prepared by freeze-drying method. The interaction of muscone with ${\beta}-CD$ in solid state was investigated by Infrared (IR) spectroscopy and differential scanning calorimetry (DSC). IR and DSC studies between $muscone-{\beta}-CD$ inclusion complex and physical mixture showed that $muscone-{\beta}-CD$ inclusion complex was prepared stably. From the amount of muscone incorporated in the inclusion complex, it was found that the molar ratio of muscone : ${\beta}-CD$ was 1:1. Relative spatial position of muscone and ${\beta}-CD$ was observed by Hyperchem molecular modelling program.