• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.54-58
• /
• 1998

Four introduced forage rape cultivars 'Akela', 'Ramon', 'Sparta', and 'Velox' and a leading rapeseed cultivar Hall-ayuchae were seeded on 1 October 1994 on 20-cm rows at seeding rates of 3, 5, 7, 10, 13, and IS kg/ha to select the best adapted forage rape cultivars and to determine the optimum seeding rate in the Cheju area. Days to flowering of each cultivar was not significantly affected by seeding rate. Average plant height increased from 151 to 164 cm as seeding rate increased from 3 to 10 kg/ha and then decreased to 156 cm at 15 kg/ha. Stem diameter linearly decreased with increasing seeding rate. The optimum seeding rate for the greatest dry matter and protein yields of five cultivars ranged from 10.7 to 11.8 and 10.8 to 14.4 kg/ha, respectively. Dry matter yields of five cultivars ranged from 7.72 and 22.01 Mg/ha. Sparta produced the greatest dry matter yield, followed by Akela, Ramon, Hallayuchae, and Velox. Crude protein yields of five cultivars ranged from 0.29 to 1.08 Mg/ha. Sparta produced the greatest crude protein yield, followed by Akela, Ramon, Velox, and Hallayuchae. As seeding rate increased, crude protein content linearly increased but crude fiber content linearly decreased. The forage cultivars had higher crude protein and lower crude fiber than the oilseed cultivar Hallayuchae. Our results demonstrate that Sparta was the best adapted cultivar to Cheju area and the optimum seeding rate for Sparta was about 10 kg/ha.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.52.3-52.3
• /
• 2019

We investigate a relative contribution from short to long-term flaring rate to predicting M and X-class flare probabilities. In this study, we consider magnetic parameters summarizing distribution and non-potentiality by Solar Dynamics Observatory/Helioseimic and Magnetic Imager and flare list by Geostationary Operational Environmental Satellites. A short-term rate is the number of major flares that occurred in an given active region (AR) within one day before the prediction time. A mid-term rate is a mean flaring rate from the AR appearance day to one day before the prediction time. A long-term rate is a rate determined from a relationship between magnetic parameter values of ARs and their flaring rates from 2010 May to 2015 April. In our model, the predicted rate is given by the combination of weighted three rates satisfying that their sum of the weights is 1. We calculate Brier skill scores (BSSs) for investigating weights of three terms giving the best prediction performance using ARs from 2015 April to 2018 April. The BSS (0.22) of the model with only long-term is higher than that with only short-term or mid-term. When short or mid-term are considered additionally, the BSSs are improved. Our model has the best performance (BSS = 0.29) when all three terms are considered, and their relative contribution from short to long-term rate are 19%, 23%, and 58%, respectively. This model seems to be more effective when predicting active solar ARs having several major flares.

• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.143-146
• /
• 2007

This study was carried out to assess the dimensional stability of wood material treated by plastic processing for bentwood and compression wood. The evaluation method was different between two wood materials, but the treatments for them were very similar to each other. One of the main methods is heat treatment with sufficient water vapor. In bentwood, the used species were painted maple (Acer mono), bitter wood (Picrasma quassioides) and birch (Betula schmidtii). Steaming was the worst treatment method for dimensional stabilization of bentwood. The best results could be attained with PEG treatment for dimensional stabilization of bentwood. Dimensional stability of bitter wood was found to be conspicuous. However the steaming treatment at lower temperatures, i.e., about $130^{\circ}C$ was not suitable for dimensional stability of bentwood. In compression wood, the used specimen was Italian poplar wood (Populus euramericana). Two heat compressive pressing conditions, an open-press system and an air-tighten closed-press system, were used. The recovery rate was measured after boiling and/or absorbing in water to estimate the dimensional stability of heat compressed wood. The best dimensional stability of compressed wood in the air-tighten closed-press system was found to be better at $200^{\circ}C$ than $180^{\circ}C$. The best compression rate for dimensional stability was 73 percent.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.3
• /
• pp.361-368
• /
• 2019

The purpose of this study was to establish the best optimized extraction condition for the optimal development of fresh maca beverage using low temperature extraction and enzyme treatment. Low temperatures were applied to prevent heat-related nutritional loss during the extraction process. Best extraction conditions were investigated based on the ratio of maca to water, the ratio of enzymes, extraction temperature and time, and agitation. The optimal enzyme conditions were also examined after the treatment of cellulase:pectinase mixture to maintain the original color and flavor, as well as to increase the extraction yield. When cellulase:pectinase was 1:1, the extraction rate ranged from 77.84 to 79.29%. In addition, the best extraction rate was found when maca was mixed with twice volume of water and incubated at $45^{\circ}C$ ($84.05{\pm}0.32%$) with 90 rpm ($87.13{\pm}0.46%$) agitation for 3 hours ($84.73{\pm}0.29%$). Furthermore, sensory evaluation showed a high score in flavor, sweetness, and overall acceptability after adding 3% jujube concentrate into a fresh maca beverage.

• Clinical and Experimental Reproductive Medicine
• /
• v.19 no.2
• /
• pp.163-168
• /
• 1992

This study was carried out to set up the ovum bank for ovum donation and to determine the best freezing method for human immature oocytes. Human immature follicular oocytes were cryopreserved by slow freezing and rapid thawing method. Immature follicular oocytes were treated by propanediol(PROH) solution by 2 and 4 step method in protocols A & B, respectively. In protocol C, immature oocytes were exposed to sucrose prior to treatment of PROH by 4 step method. We compared survival rate, maturation rate, and fertilization rate of immature oocytes among three protocols. Results were as follows. 1. Oocytes treated by the protocol C showed the highest survival rate( 70.3 %) and maturation rate(34.6%) after thawing. 2. Survival rate of oocytes treated by the protocol C was significantly higher than that of the protocol B after thawing(p<0.05). In conclusion, treatment of oocytes with sucrose prior to expose PROH was the best freezing method. Sucrose may have reduced the toxic effect of cryoprotectant to oocytes. We failed to induce fertilization of oocytes, which were treated by any protocols, by conventional insemination method, but obtained 28.8% fertilization rate by using partial zona dissection(PZD) method. This result suggests that micromanipulation(PZD) of the thawed oocytes before insemination will improve the fertilization rate.

• Genomics & Informatics
• /
• v.21 no.4
• /
• pp.50.1-50.9
• /
• 2023

Vaccine development is one of the key efforts to control the spread of coronavirus disease 2019 (COVID-19). However, it has become apparent that the immunity acquired through vaccination is not permanent, known as the waning effect. Therefore, monitoring the proportion of the population with immunity is essential to improve the forecasting of future waves of the pandemic. Despite this, the impact of the waning effect on forecasting accuracies has not been extensively studied. We proposed a method for the estimation of the effective immunity (EI) rate which represents the waning effect by integrating the second and booster doses of COVID-19 vaccines. The EI rate, with different periods to the onset of the waning effect, was incorporated into three statistical models and two machine learning models. Stringency Index, omicron variant BA.5 rate (BA.5 rate), booster shot rate (BSR), and the EI rate were used as covariates and the best covariate combination was selected using prediction error. Among the prediction results, Generalized Additive Model showed the best improvement (decreasing 86% test error) with the EI rate. Furthermore, we confirmed that South Korea's decision to recommend booster shots after 90 days is reasonable since the waning effect onsets 90 days after the last dose of vaccine which improves the prediction of confirmed cases and deaths. Substituting BSR with EI rate in statistical models not only results in better predictions but also makes it possible to forecast a potential wave and help the local community react proactively to a rapid increase in confirmed cases.

• Environmental and Resource Economics Review
• /
• v.9 no.4
• /
• pp.701-725
• /
• 2000

Environmental taxes tend to compound the welfare cost of pre-existing tax distortions, the tax-interaction effect, however they also raise government revenues, tax revenue-recycling effect. By incorporating these two opposite tax effects, this paper examines a second- best environmental taxation for a polluting monopolist with distortionary taxes. The analysis suggests that the complications posed by pre-existing tax distortions as well as market structure can be key considerations in designing environmental taxes. In the tax setting game between regulator and regulated firm, we also derive the equilibrium tax rate and examine its relationship with distortionary taxes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.12
• /
• pp.520-528
• /
• 2002

The ATM Forum recently introduced the Guaranteed Frame Rate(GFR) service category GFR service has been designed to support classical best effort traffic such as TCP/IP based traffic. The GFR service not only guarantees a minimum throughput, but also supports fair distribution of available bandwidth to completing VCs. In this paper, we proposed a new buffer management algorithm based on leaky bucket to provide minimum cell rate guarantee and improve fairness. The proposed algorithm reduces complexity and processing overhead of leaky-bucket algorithm to implement easily.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.578-581
• /
• 2001

A treatability study was conducted using a hydrocarbon-contaminated soil for the oPtimization of bioremediation strategy best fit to a given set of contamination. The applicability of nutrients, biosurfactant, and oil-degrading microorganisms were examined by monitoring $CO_2$ evolution and oil degradation The addition of inorganic nutrients in the form of slow released fertilizer accelerated the initial rate of $CO_2$ evolution by a factor of 3. The application of oil-degrading microorganisms did not significantly increased $CO_2$ evolution or biodegradation efficiency. Application of a commercial biosurfactant was most effect in terms of the total $CO_2$ evolution and the oil degradation rate. The results indicate that $CO_2$ evolution measurement was found to be a simple and reliable countermeasure of crude oil hydrocarbon mineralization for the rapid determination of the best-fit bioremediation strategy.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.99-104
• /
• 2001

Slag product has the possibility as alternative aggregate and sand under the circumstance of natural resource shortage. Copper slag is the by-product produced in process of copper industry. Recycling the slag in construction industry could give positive effects on the environmental preservation. This study presents that the fundamental properties of high strength concrete which used copper slag as alternative sand. Testing factors are concrete's slump, bleeding, air contents and compressive strength. The results of this study are as follows. (1) Mixing of W/C 30%, substitution rate 25% shows the best slump. As substitution rates are going up, concrete slump is uprising and air contents are downsizing. (2) The bleeding of concrete becomes more serious as substitution rates are going up. (3) The best compressive strength of copper slag concrete is achieved in mixing of W/C 30%, substitution rate 25%.