• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2283-2288
• /
• 2009

인간의 시각정보처리는 망막에서 입력된 영상을 시각피질에 전달될 때 많은 특성을 가지고 있다. 그 중에서 확대성질과 방향성에 대한 민감도를 분석하여 영상인식에 미치는 영향을 분석하고자 한다. 확대성질은 중심와의 영역이 시각피질에서 확대영역으로 할당되는 사실을 확대배율이라고 부른다. 방향수직반응의 가중치와 수평 및 대각선반응의 가중치를 여러 가지로 변동하여 영상의 인식률을 비교함으로써 수직반응 정도에 매우 민감함을 보이며 차후 인간시각모델 구성에 적용하고자 한다.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.899-906
• /
• 2013

Using generated conformations from docking analysis by Gold algorithm, some 3D-QSAR models; CoMFA and CoMSIA have been created on 39 N-benzoylated phenoxazines and phenothiazines, including their S-oxidized analogues. These molecules inhibit the polymerization of tubulin into microtubules and thus they have been studied for the development of antitumor drugs. Training set for the CoMFA and CoMSIA models using 30 docked conformations gives $q^2$ Leave one out (LOO) values of 0.756 and 0.617, and $r^2$ ncv values of 0.988 and 0.956, respectively. The ability of prediction and robustness of the models were evaluated by test set, cross validation (leave-one-out and leave-ten-out), bootstrapping, and progressive scrambling approaches. The all-orientation search (AOS) was used to achieve the best orientation to minimize the effect of initial orientation of the structures. The docking results confirmed CoMFA and CoMSIA contour maps. The docking and 3D-QSAR studies were thoroughly interpreted and discussed and confirmed the experimental $pIC_{50}$ values.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.47-50
• /
• 1999

The orientation mechanism of an amorphous $Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ phase were studied by using the dilatometry. The amorphous $Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ samples brought about a volume shrinkage at the onset of the crystallization of a $Bi_{2}$$Sr_{2}$$CaCu_{2}$$O_{6}$phase around $400^{\circ}C$. The random crystal growth of $Bi_{2}$$Sr_{2}$$CaCu_{2}$$O_{8}$ phase around $800^{\circ}C$. yielded a rapid volume expansion and after then samples shrinmed, accompanied with the crystal orientation. The$Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ (x=0.4) sample exhibited the best-oriented structure because the liquid phase formed seemed to have the lowest viscosity which would contributed to the easy collapse of the card-house structure.

• 한국CDE학회논문집
• /
• 제16권2호
• /
• pp.83-91
• /
• 2011

There are many researches to make low-energy building. Lots of them focus on facility systems and insulation performance of building materials. However, not only systematic solutions but also approaches in early design stages are important to reduce energy consumption. Using BIM(Building Information Modelling) is considered as an effective and efficient way to simulate building energy and decide alternatives than traditional energy simulation because BIM based energy simulation makes to reduce much time for energy modeling. This study focuses on development of optimized geometry for super tall office buildings in Seoul, Korea. Specifically, length to width ratio and building orientation are main topics of this study because these two topics are the most basic and preceding factors deciding mass design. In this study, Revit MEP 2011 and Ecotect Analysis 2011 are used to make case models and calculate energy load in early design stages. Energy properties of material abide by Korean Standards for Energy Conservation in Building, Korean Guideline for Energy Conservation in Public Office and ASHRAE Standard in USA. This study presents best length to width ratio of plan and optimized orientation by evaluating the case models. Furthermore, this study suggests what should be considered for each case to decrease energy load.

• Journal of Communications and Networks
• /
• 제18권4호
• /
• pp.639-648
• /
• 2016

Next-generation (4G) systems are designed to support universal frequency reuse (UFR) to achieve best use of valuable spectra. However, it leads to undesirable interference level near cell borders. To control this, 4G systems adopt techniques, such as network multiple-input multiple-output (MIMO) and inter-cell interference coordination (ICIC), to improve cell-edge throughput. Network MIMO aims at mitigating inter-cell interference towards cell-edge users (CEUs) through multi-cell cooperation, where each collaborative base station serves both cell-center users (CCUs) and CEUs, including other cells' CEUs, under a power constraint. The present ICIC strategies cannot be directly applied to network MIMO because they were designed in absence of multi-cell coordination. In the presence of network MIMO, this paper investigates antenna orientations in ICIC and the method of power management. Results show that a proper antenna orientation can improve the cell-edge capacity and meantime lower the interference to CCUs. Capacity inconsistency between CCUs and CEUs is detrimental to mobile communications. Simulation results show that the proposed power management for ICIC in network MIMO systems can achieve a uniform data rate regardless users' position.

• Journal of Biosystems Engineering
• /
• 제22권3호
• /
• pp.325-332
• /
• 1997

The use of a robotic transplanter reduces the labor requirement in the greenhouse by carrying out repetitive tasks in an accurate and reliable manner. The transplanter manipulates seedlings by means of end-effector. The end-effector is designed differently from an industrial robot because it manulates biological seedlings of variable size, shape, position, and orientation. This study was conducted to develop an end-effector of a robotic transplanter for bedding plants. The development of an end-effector included selection of the best finger type for the transplanting operation. The performance of developed end-effector was tested and compared with two different transplanting schemes depending on the leaf-orientation consideration. The end-effector developed in this research reliably handled seedlings during transplanting task. Results showed that the shovel type finger was suitable for transplanting with the damaging seedlings.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.905-909
• /
• 2007

Crystalline and micro-structural characteristics of ZnO thin films which were deposited on p-Si(100) with cooling naturally down of pre-heated substrate during RF magnetron sputter deposition, were investigated by XRD and SEM in this paper. The film which was prepared on the substrate which was pre-heated to $400^{\circ}C$ before deposition and then cooled naturally down during deposition, showed the most outstanding c-axis preferred orientation. The ZnO thin film having the best crystalline result were applied to SMR type FBAR device and resonance properties of the device were investigated by network analyzer. It showed that resonance frequency was 2.05 GHz, return loss was -30.64 dB, quality factor was 3169 and electromechanical coupling factor was 0.4 %. This deposition method would be very useful for application of surface acoustic wave filter or film bulk acoustic wave resonator.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.965-970
• /
• 1994

ZnO transparent conducting oxide thin films have been prepared by Pyrosol deposition method and the effects of the different experimental variables on the electrical resistivity and optical transmittance of the prepared films have been investigated in details. The best film with a resistivity of about 8 X 10S0-2TΩcm and transmittance about 80% has been obtained at the substrate temperature of 4$25^{\circ}C$ by using HS12T+CHS13TOH(1:3) solvent and NS12T carrier gas after annealing at 20$0^{\circ}C$ for 40 minutes in vacuum. Furthermore, We have also found the effect of substrate temperature on crystallographic orientation and surface morphology. Annealing of the as-deposited film in vacuum leads to a substantial reduction in resistivity without affecting the optical transmittance and crystallographic orientation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.24-29
• /
• 2002

In any rapid prototyping process, the layer by layer building process introduces an area error between the staircase and the surface line specified by the computer-aided design model. This affects the dimensional accuracy as well as the surface finish for different part build orientations. This paper describes a methodology for computing the area error for any orientation of the part built by the fused deposition modelling system. This technique can be applied to determine the best build orientation of the part, based on the minimum area error. This technique is verified by comparing the results with the experimental measurements of the area error of the parts built at different orientations.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.401-405
• /
• 1999

Reflective silver films with high quality were prepared on polyester substrate by using sputter deposit on techniques. Best reflectivity thin films of silver were produced with process parameters of $10^{-6}$ Torr as base pressure, 50 W as R.F. power, 5 mTorr as working pressure, and 10 sccm as Ar flow rate. Being deposited with an R.F. power of 50 W, Ag films revealed the highest 96.3 % reflectance as illuminated with a light of 700 nm wavelength. The adhesion of sample films showed as high as 14 to $20{\;}kg/\textrm{cm}^2$, which is suitable for industrial purposes. Their film crystallinity and orientation resulted in the planes of (111) and (200) for the growth with a preferred orientation of <111>, in general. The cross-sections of thin film specimens showed columnar structures. It is noted that columns became coarsened and less dense as R.F. power increased, resulting in a low reflectivity for the product film.