• Journal of Environmental Analysis, Health and Toxicology
• /
• v.21 no.4
• /
• pp.304-315
• /
• 2018

Located in Gimhae, Hwapo is the biggest riverine wetland in the province of Gyeongsangsam-do, Korea, and is a major habitat for various species. However, it is suspected that various pollutants enter the wetlands from agricultural and industrial areas. This study identifies major organic pollutants in this wetland and their sources using high performance liquid chromatography-high resolution mass spectrometry during one summer season. Forty-five substances were selected for quantitative analysis using target screening, and other non-selected compounds were screened using suspect and non-target screening methods. The results were that 21 and 17 targeted substances were detected in July and August, respectively. Major pollutants in July and August were oxadiazon (July: 17-220 ng/L, August: 66-460 ng/L), carbendazim (July: 10-110 ng/L, August: 64-520 ng/L), caffeine (July: 33-1,100 ng/L, August: 56-580 ng/L), and niflumic acid (July: 23-75 ng/L, August: 42-290 ng/L). Sampling sites S4 in July and S2 in August were the major inflow points. Ten substances (tricyclazole, hexaconazole, diuron, fexofenadine, irbesartan, simetryn, cimetidine, valsartan, tebuconazole, and benzotriazole) and four metabolites (valsartan acid, azoxystrobin acid, TEB_M324c, and 2-aminobenzimidazole) were tentatively identified through suspect and non-target screening, respectively.

• Corrosion Science and Technology
• /
• v.6 no.4
• /
• pp.206-210
• /
• 2007

Aerospace aluminum alloys such as Al alloy 2024-T3 and 7075-T6 are subject to localized corrosion due the existence of intermetallics containing Cu, Mg or Zn. Chromate is currently widely used in the aerospace industry as the corrosion inhibitor for these alloys. However, chromate needs to be replaced due to its strong carcinogenicity. In this study, an extensive pigment screening has been performed to find replacements for chromates. Different categories of inhibitors were evaluated by immersion tests, DC polarization tests and other methods. Phosphates, zinc salts, cerium salts, vanadates and benzotriazole were found to be effective inhibitors for AA7075. Among those inhibitors, zinc phosphate was found to be the most effective in our novel, silane-based, one-step aqueous primer system. The performance of this primer is comparable to that of currently used chromate primers in accelerated corrosion tests, while it is completely chromate-free and its VOC is about 80% less than that of current primers. Studies by SEM/EDS showed that the unique structure of the superprimer accounts for the strong anti-corrosion performance of the zinc phosphate pigment. The self-assembled stratified double-layer structure of the superprimer is characterized by a less-penetrable hydrophobic layer at the top and a hydrophilic layer accommodating the inhibitors underneath. The top layer functions as the physical barrier against water ingress, while the lower layer functions as a reservoirfor the inhibitor, which is leached out only if the coating is damaged by a scratch or scribe. The presence of a silane in the primer further improves the adhesion and anti-corrosion performance of the primer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.32.2-32.2
• /
• 2011

반도체 생산공정에서 CMP (Chemical-mechanical planarization) 공정은 우수한 전기전도성 재료인 Cu의 사용과 다층구조의 소자를 형성하기 위해서 도입되었으며, 최근 소자의 집적도가 증가함에 따라 CMP 공정 비중은 점점 높아지고 있다. Cu CMP 공정에서 연마제인 슬러리는 금속 표면과의 물리적 화학적 반응을 동시에 사용하여 표면을 연마하게 되며, 연마특성을 향상시키기 위해 산화제, 부식방지제, 분산제 및 다양한 계면활성제가 첨가된다. 하지만 슬러리는 Cu 표면을 평탄화하는 동시에 오염입자, 유기오염물, 스크레치, 표면부식 등을 발생시키며 결과적으로 소자의 결함을 야기시킨다. 특히 부식방지제로 사용되는 BTA (Benzotriazole)은 Cu CMP 공정 중 Cu-BTA 형태로 표면에 흡착되어 오염원으로 작용하며 입자오염을 증가시시고 건조공정에서 물반점 등의 표면 결함을 발생시킨다. 이러한 문제점을 해결하기 위해 Cu 표면에서 식각과 부식반응을 최소화하며, 오염입자 제거 및 유기오염물을 효과적으로 제거하기 위한 Post-CMP 세정 공정과 세정액 개발이 요구된다. 본 연구에서는 오염입자 및 유기물 제거와 동시에 표면 거칠기와 부식현상을 제어할 수 있는 post Cu CMP 세정액을 개발 평가하였다. 오염입자 및 유기오염물을 제거하기 위해서 염기성 용액인 TMAH 사용하였으며, Cu 이온을 용해할 수 있는 Chelating agent와 표면 부식을 억제하는 부식 방지제를 사용하여 세정액을 합성하였다. 접촉각 측정과 FESEM(field Emission Scanning Electron Microscope) 분석을 통하여 CMP 공정에서 발생하는 유기오염물과 오염입자의 흡착과 제거를 확인하였으며 Cu 웨이퍼 세정 전후의 표면 거칠기의 변화와 식각량을 AFM(Atomic Force Microscope)과 4-point probe를 사용하여 각각 평가하였다. 또한 세정액 내에서의 연마입자의 zeta-potential을 측정 및 조절하여 세정력을 향상시켰다. 개발된 세정액과 Cu 표면에서의 화학반응 및 부식방지력은 potentiostat를 이용한 전기화학 분석법을 통해서 chelating agent와 부식방지제의 농도를 최적화 시켰다. 개발된 세정액을 적용함으로써 Cu-BTA 형태의 유기오염물과 오염입자들이 효과적으로 제거됨을 확인하였다.

• 보존과학연구
• /
• s.21
• /
• pp.77-99
• /
• 2000

Tumuli located in Chodang-dong in Kangreung City are sitesexcavated by the Museum of Kangreung University in 1993.Ofthese sites, a gilt bronze crown and gilt bronze sword with ring pommel with a tri-leaf ornament were excavated from the B-16tumulus. Underneath the gilt bronze crown was the gilt bronzes word with ring pommel with tri-leaf ornament, and these artifacts were treated with Polyurethane foams on the spot followed by special measures for conservation. This manuscript describes measures for conservation andanalysis with regard to the gilt bronze crown, gilt bronze sword with ring pommel with tri-leaf ornament and gilt bronze beltornaments. Bronze on the gilt bronze crown was completely corroded, therefore it was consolidated together with soil in the back of the artifact with Paraloid B72 after cleaning. Polyurethanefoams bottom was finished by applying the mixture of Epoxy resinAW106 and HV935K with soil. On the sword with ring pommel, the wooden part of the hilt was coated with Paraloid B72 (in Xylene) and the blade was consolidated with Paraloid NAD-10 30% after desalting with Sodium sesquicarbonate method. The gilt bronzebelt ornaments were treated with 3% Benzotriazole, coated with Paraloid B72 and then joined by using Cyanlacrylate. Specimens for the gilt bronze crown and gilt bronze belt ornaments were produced and gilding layers were examined under a metallographic microscope. The gilt bronze crown and the gilt bronze belt ornament maintained relatively good gilding quality with uniform gilding layers. Analysis of wood for the sheath of the sword with ring pommel revealed it to be Juglans mandshurica. Further more, analysis of constituents for a blue colored grassbead from dissolution of Polyurethane foams found it to be from the $Na_2O$-CaO-$AI_2O_3$-$SiO_2$ family.

• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.98-107
• /
• 2004

In this study, $^1H$ NMR spectroscopy and HPLC were used to identify the type and quantity of each component in an acrylic coating materials applied for an automotive part. By the $^1H$ NMR analysis, it was found that this acrylic coating contained about 88.40 wt% of poly methyl methacrylate (PMMA), 7.05 wt% of methyl methacrylate (MMA), and 2.36 wt% of allyl methacrylate. Polymer additives such as a benzotriazole light stabilizer (Hisorb 328), an oxanilide light stabilizer, butylated hydroxy toluene (BHT), and dimethyl phthalate (DMP) were also identified and measured quantitatively from the $^1H$ NMR spectra. However, only two light stabilizers were identified by reverse phase (RP) HPLC analysis using Bondapak C18 column, methanol mobile phase, and a PDA (Photodiode array) detector. The contents of two light stabilizers in the acrylic coating were measured by a quantitative analysis through UV-Vis spectroscopy and compared with the NMR data. The analytical informations from $^1H$ NMR spetra were better than those from HPLC-PDA plot.

• Toxicological Research
• /
• v.35 no.2
• /
• pp.119-129
• /
• 2019

As the use of cosmetics has greatly increased in a daily life, safety issues with cosmetic ingredients have drawn an attention. Drometrizole [2-(2'-hydroxy-5'-methylphenyl)benzotriazole] is categorized as a sunscreen ingredient and is used in cosmetics and non-cosmetics as a UV light absorber. No significant toxicity has been observed in acute oral, inhalation, or dermal toxicity studies. In a 13-week oral toxicity study in beagle dogs, No observed adverse effect level (NOAEL) was determined as 31.75 mg/kg bw/day in males and 34.6 mg/kg bw/day in females, based on increased serum alanine aminotransferase activity. Although drometrizole was negative for skin sensitization in two Magnusson-Kligman maximization tests in guinea pigs, there were two case reports of consumers presenting with allergic contact dermatitis. Drometrizole showed no teratogenicity in reproductive and developmental toxicity studies in which rats and mice were treated for 6 to 15 days of the gestation period. Ames tests showed that drometrizole was not mutagenic. A long-term carcinogenicity study using mice and rats showed no significant carcinogenic effect. A nail product containing 0.03% drometrizole was nonirritating, non-sensitizing and non-photosensitizing in a test with 147 human subjects. For risk assessment, the NOAEL chosen was 31.75 mg/kg bw/day in a 13-week oral toxicity study. Systemic exposure dosages were 0.27228 mg/kg bw/day and 1.90598 mg/kg bw/day for 1% and 7% drometrizole in cosmetics, respectively. Risk characterization studies demonstrated that when cosmetic products contain 1.0% of drometrizole, the margin of safety was greater than 100. Based on the risk assessment data, the MFDS revised the regulatory concentration of drometrizole from 7% to 1% in 2015. Under current regulation, drometrizole is considered to be safe for use in cosmetics. If new toxicological data are obtained in the future, the risk assessment should be carried out to update the appropriate guidelines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.10-15
• /
• 2020

Ultraviolet rays, which have wavelengths smaller than 400 nm, are very harmful to the eyes. Recently, high-energy visible light was also revealed to be harmful to retinal cells. Therefore, polymer eyeglass lenses that can block UV and high-energy visible light are needed for eye health. In this study, high-refractive-index polymer eyeglass lens, n=1.67, were manufactured using the injection-mold method with the m-xylene diisocyanate monomer, 2,3-bis((2-mercaptoethyl)thio)-1-propanethiol monomer, benzotriazole UV absorber, release of alkyl phosphoric ester, dye mixture of CI solvent violet 13, and catalyst of dibutyltin dichloride mixture. A multi-layer anti-reflection coating was applied to manufactured polymer eyeglass lenses for both sides using an E-beam evaporation system. The optical properties of the manufactured lenses with the UV and high-energy visible light-blocking function were analyzed by UV-visible spectrophotometry. As a result, the polymer eyeglass lens with a UV absorber of 0.5 wt. % blocked 99% of UV and high-energy visible light shorter than 411 nm. The average transmittance of the polymer eyeglass lens with a UV absorber of 0.5wt.% was 97.9% in the range of 460 ~ 660 nm for photopic eye sensitivity higher than 10%. Therefore, clear image acquisition in photopic vision is possible.