• 제목/요약/키워드: Benzothiazole

Search Result 67, Processing Time 0.023 seconds

Binary Cure Systems of 1,6-Bis(N,N'-dibenzylthiocarbamoyldithio)-hexane and Benzothiazole Sulfenamides in Carbon Black-filled Natural Rubber Compounds

  • Choi, Sung-Seen;Park, Byung-Ho;Lee, Seung-Goo;Kim, Beom-Tae
    • Bulletin of the Korean Chemical Society
    • /
    • v.23 no.2
    • /
    • pp.320-324
    • /
    • 2002
  • Binary cure system is composed of different two cure accelerators, which can cause a synergy effect to delay the scorch time and to increase the cure rate. In this study, binary cure systems between 1,6-bis(N,N'-dibenzylthiocarbamoyldithio)-hexane (DBTH) and benzothiazole sulfenamides were investigated using carbon black-filled natural rubber compounds. N-Cyclohexyl-2-benzothiazole sulfenamide (CBS), N-tert-butyl-2-benzothiazole sulfenamide (TBBS), and 2-(morpholinothio) benzothiazole (MOR) were employed as benzothiazole sulfenamides. The binary cure systems show scorch safty at high temperature. The binary cure systems have faster cure rate and better reversion resistance than the single cure system of the benzothiazole sulfenamides. DBTH is found to be more effective to decrease the viscosity of a compound than the benzothiazole sulfenamides. Physical properties of the vulcanizates with the binary cure system are better than those of the vulcanizates with the single one.

Effect of benzothiazole additives and properties of copper foils on high current density (고전류밀도에서의 Benzothiazole 첨가제의 동박 특성에 미치는 영향)

  • Woo, Tae-Gyu;Kang, Byeoung-Jae;Park, Jong-Jae;Park, Il-Song
    • Journal of the Korean institute of surface engineering
    • /
    • v.55 no.4
    • /
    • pp.222-230
    • /
    • 2022
  • The electroplating for copper foils has many advantages in economics. During the electroplating, the selection of appropriate additives is needed to manufacture copper foils with various properties. Therefore, it is investigated the initial plating voltage and the properties of copper foil electroplated in the electrolyte with benzothiazole as additives. The addition of benzothiazole without any additives decreased effectively the initial plating voltage. However, the initial voltage increased when the additives was used in combination with an inhibitor and a leveler along with benzothiazole. Moreover, the voltage tends to increase with the concentration of benzothiazole except for 40 ppm group. The mixed additives could change not only the initial voltage but also the morphology of crystals on the surface. When benzothiazole is added at 20 ppm or less, it was observed that the clustered crystals existed on the surface, which result in ununiform surface and high roughness value. In addition, the grain size increased with the amount of benzothiazole, but the resistivity decreased. However, when the leveler was added in 20 ppm, the grain size was decreased with the amount of benzothiazole. The size of the crystals could be influenced by the mixing ratio of additives. Therefore, it is necessary to study on the effect of concentration ratio of additives in the future.

Benzothiazole Sulfenamide계 촉진제의 안정성

  • Luecken J.J;sullivan A.B
    • The tire
    • /
    • s.98
    • /
    • pp.18-26
    • /
    • 1982
  • 세계적으로 가장 많이 사용하고 있는 Benzothiazole Sulfenamide 계 촉진제가 저장중 또는 혼합사용중에 분해되어 성능이 저하되므로 안전성이 가장 큰 문제로 대두되고 있다. 따라서 Benzothiazole Sulfenamide계 촉진제의 품질 첵크 및 방법에 대하여 설명하고자 한다.

  • PDF

Synthesis and Photoluminescence of Biphenol Derivatives with Fluorescent Chromophore (형광 발색단을 가진 biphenol유도체의 합성과 PL)

  • Lee, Mun-Hag;Yang, Jong-Heon;Chung, Su-Tae;Son, Se-Mo;Kim, Sung-Bin
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.07b
    • /
    • pp.1010-1012
    • /
    • 2002
  • 3,3'-di-benzothiazole-4,4-biphenol(DBTB), 3,3',5,5'-tetra-benzothiazole-4,4'- biphenol(TBTB), 5,5'-methy lene-bis(2-(2'-hydroxyphenyl) benzothiazole derivatives were synthesized by multistep. PL of DBTB and TBTB were dramatically shift 47nm and 75nm respectively longer wavelength than the emission of 2-(2'-hydroxyphenyl)-benzothiazole(HBT) because of intramolecular extened $\pi$-conjugate system but methylene-bis-benzothiazole derivatives do not occur at Wavelength-shift.

  • PDF

Synthesis and Antidiabetic Evaluation of Benzothiazole Derivatives

  • Mariappan, G.;Prabhat, P.;Sutharson, L.;Banerjee, J.;Patangia, U.;Nath, S.
    • Journal of the Korean Chemical Society
    • /
    • v.56 no.2
    • /
    • pp.251-256
    • /
    • 2012
  • A novel series of benzothiazole derivatives were synthesized and assayed in vivo to investigate their hypoglycemic activity by streptozotocin-induced diebetic model in rat. These derivatives showed considerable biological efficacy when compared to glibenclamide, a potent and well known antidiabetic agent as a reference drug. All the compounds were effective, amongst them 3d showed more prominent activity at 100 mg/kg p.o. The experimental results are statistically significant at p<0.01 and p<0.05 level.

Solvatochromic Fluorescence Behavior of 8-Aminoquinoline-Benzothiazole: A Sensitive Probe for Water Composition in Binary Aqueous Solutions

  • Kim, Young-Hee;Youk, Jin-Soo;Kim, So-Hee;Chang, Suk-Kyu
    • Bulletin of the Korean Chemical Society
    • /
    • v.26 no.1
    • /
    • pp.47-50
    • /
    • 2005
  • Solvatochromic fluorescence behavior of 8-aminoquinoline based benzothiazole derivative in varying solvent systems has been investigated. Benzothiazole appended 8-aminoquinoline 3 showed distinctive fluorescence color changes depending upon the solvent polarities and the fluorescence color changes occurred over relatively wide span in visible region from 486 nm to 598 nm which can be detected with naked eye. Compound 3 also exhibited significant spectral shifts in ${\lambda}_{em}$ as a function of water composition in binary aqueous solvent systems. The changes are due to the specific interaction of 3 by hydrogen bonding with water as well as general solvent effect. The observed solvatochromic fluorescence characteristics of 3 could be used as a new probe for the micro-environmental polarity changes as well as a sensitive sensor for the determination of water composition in binary aqueous solutions.

Synthesis of 6-Exomethylene Penams with Benzothiazole Ring (Benzothiazole고리가 있는 6-엑소메칠렌 펜남 유도체의 합성)

  • 임채욱;박희석;김승재;임철부
    • YAKHAK HOEJI
    • /
    • v.46 no.5
    • /
    • pp.307-312
    • /
    • 2002
  • The synthesis of new 6-exomethylene penams with benzothiazole ring was described. The 6,6-dibromopenam 5 was treated with $CH_3$MgBr and carbaldehyde 4 to afford the 6-bromo-6-(1-hydroxy-1-methyl)penicillanate 6, which was reacted with acetic anhydride to give acetoxy compound 7. The deacetobromination of acetoxy compound 7 with zinc and acetic acid gave 6-exomethylene penams, Z-isomer 8 and E-isomer 9, which was oxidized to sulfones 10 by m-CPBA. The p-methoxybenzyl compounds 6~10 were deprotected by AlCl$_3$ and neutralized to give the sodium salts 11~15.

Synthesis and in Vitro Antimicrobial Evaluation of Benzothiazole Incorporated Thiazolidin-4-ones Derivatives

  • Agarwal, Shikha;Agarwal, Dinesh Kumar;Gautam, Naveen;Agarwal, Kshamta;Gautam, Dinesh Chandra
    • Journal of the Korean Chemical Society
    • /
    • v.58 no.1
    • /
    • pp.33-38
    • /
    • 2014
  • In the course of work on new pharmacologically active antimicrobial agents, we have reported the synthesis of a new class of structurally novel derivatives, incorporating two bioactive structures, a benzothiazole and thiazolidin-4-one, to yield a class of compounds having interesting antimicrobial properties. The antimicrobial properties of the synthesized compounds were investigated against bacteria (Staphylococcus aureus and Escherchia coli) and fungi (Candida albicans and Aspergillus niger) using serial plate dilution method. The structure of the synthesized compounds have been established by elemental analysis and spectroscopic data.