• 한국가구학회지
• /
• 제12권2호
• /
• pp.19-27
• /
• 2001

This study was carried out to investigate the mechanical properties of woods treated with 30% aqueous solution of PEG 1000. Compressive, bending and shearing strengths were slightly decreased by PEG treatment. Absorbed energy in impact bending did not show any significant differences between untreated and PEG-treated woods.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.118-125
• /
• 2007

경골목조건축공법에서 개구부의 헤더로 많이 사용되는 조립보에 대한 설계자료를 구하기 위하여 $2{\times}6$ ($38{\times}140 mm$), $2{\times}8$ ($38{\times}184 mm$), $2{\times}10$ ($38{\times}235 mm$) 및 $2{\times}12$ ($38{\times}286 mm$) 부재를 3개 겹쳐서 휨 시험편을 제작하였다. 이들에 대한 휨 시험을 통하여 조립보에 대한 허용응력을 구하고 허용응력에 근거하여 여러 가지 하중 조건에 대한 경간표를 작성하였다. 조립보에 대한 휨 시험 결과로부터 10 mm의 처짐이 발생할 때의 휨응력을 조립보 헤더의 휨강도로 산정하였다. 조립보에 대한 경간표는 외벽에서 헤더가 사용되는 위치에 따른 5가지 하중조건과 내벽에서 헤더가 사용되는 위치에 따른 2가지 하중조건을 고려하여 작성할 수 있는 것으로 생각된다. 총 7가지 하중 조건에 있어서 외벽에 사용되는 헤더에 대한 5가지 하중조건에서는 고정하중, 활화중 및 적설하중이 포함되었으며 내벽에 사용되는 헤더에 대한 2가지 하중조건에서는 고정하중과 활하중이 포함되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권6호
• /
• pp.524-530
• /
• 2009

기둥-보 구조와 경골목구조가 혼합된 공법은 경골목구조가 심벽 또는 평벽 요소로써 구조내력성능의 대부분을 차지하고 있다. 경골목구조의 수평전단내력성능은 면재에 대한 못접합부의 전단성능으로부터 예측할 수 있으며, 못접합부는 못의 휨내력성능을 이용하여 예측할 수 있다. 못접합에 의한 내력벽의 항복내력과 벽체 강성을 예측하기 위한 기초 연구로써 못의 휨내력성능을 이용한 못접합부의 항복내력 및 접합계수(초기강성)를 검토하였다. 못접합부 내력성능 예측에는 각각의 주부재에 대해 일반 지압내력 및 지압강성을 이용하고, 파스너인 나선형 철선못의 휨시험에 의한 휨항복내력성능을 이용하였다. 홈가공부의 지름에 의한 항복내력은 예측 정밀성이 우수하였으나, 접합계수는 낮게 예측되었다. 그 원인으로 주부재에서는 비중의 영향, 측면부재에서는 못머리지름에 의한 인발, 접합부에서는 못머리부의 지압 및 모멘트저항 등이 영향을 끼침을 알 수 있었으며, 이에 대한 차후 검토가 요구된다.

• 한국농공학회지
• /
• 제24권3호
• /
• pp.92-99
• /
• 1982

The objective of this study was to investigate the compressive and bending strength characteristics of epoxy resin mortar, which is still in an early stage of its use and study in Korea. The results obtained are summarized as follows; 1. The compressive strengths of epoxy resin mortar after 1 day, 2 days and 3 days were gained 87%, 91% and 95%, respectively, in view of that of mortar at the age of 7 days. This result showed that the initial compressive strength within 1 day was very high. 2. The highest compressive strength of epoxy resin mortar was 914 kg/cm2 at the point of having the mixing ratio of one to two. It reached up to 3.7 times that of the normal portland cement mortar at the age of 28 days. 3. The bending strengths of epoxy resin mortar after 1 day, 2 days and 3 days came up to 88%, 93% and 97%, respectively, in comparing that of mortar at the age of 7 days. It was expressed to be simielar to the tendency of compressive strength. 4. The highest bending strength of epoxy resin mortar was 384 kg/cm2 at mixing ratio of one to two. It came up to as much as 6.5 times in comparing with that of the normal portland cement mortar at the age of 28 days. Therefore, the epoxy resin mortar would be effective for promoting the bending strength of structural members. 5. The regression equation between compressive and bending strength was obtained as follows; oo~=0.391 oc+27.54 (r=0.99) And the estimated value of bending strength was corresponded to about 44 per cent in comparing with that of the compressive strength.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.161-167
• /
• 2001

The overhead transmission wires operating both at warm temperature and tighten state for a long period of time in a power transmission plant are degraded by air pollution, wind, creep and slip between steel wire and aluminium conductor. The objective of this study is to investigate to investigate the characteristics of fatigue properties with tension and bending loading of a high carbon steel wire. The fatigue behaviors have been carried out by tension-tension, 4 points bending and 3 points bending loading. In the present study, a conventional fatigue strengths between 4 points bending and tension-tension fatigue were determined by Gerber, Sorderberg and Goodmans theory and we investigated S-N diagram for bending and tensile loading.

• Advances in concrete construction
• /
• 제6권2호
• /
• pp.159-175
• /
• 2018

The main aim of this study is to investigate the possible effects of metakaolin on strength and durability properties of concrete. For this purpose, concrete mixtures are produced by substituting cement with metakaolin 0, 5, 10 and 20% by weight. The amount of binder for the concrete mixtures are 300 and $400kg/m^3$ with a constant water to cement ratio of 0.6. Compressive and bending strengths, freeze-thaw and high-temperature resistances, capillary coefficients and rapid chloride permeability properties were determined and compared each other. Because of all the experiments conducted, it has been found that the use of metakaolin as a pozzolanic additive in concrete have positive effects especially on compressive and bending strengths, capillary, rapid chloride permeability, freeze-thaw resistance, and high temperatures, up to $800^{\circ}C$. The results indicated that the performance of concrete can be enhanced by metakaolin. Particularly, compressive strength and durability properties have found to be improved with increasing metakaolin content which is attributed to pozzolanic activity and filler effect. Furthermore, metakaolin has relatively positive impacts under elevated temperatures and freeze-thaw effects. However, almost all the strengths of entire concrete specimens are lost at $800^{\circ}C$. Consequently, the optimum metakaolin substitution ratio can be suggested to be 20% as per this study.

• 한국세라믹학회지
• /
• 제23권3호
• /
• pp.67-77
• /
• 1986

various properties and manufacturing conditions were investigated in order to synthesize the glass-ceramics of $CaO-P_2O_5$ system for bioceramics. Compositions of easy unidirectional crystallization were between 47.5 and 50, 0mol% CaO For the glass rods prepared by pulling them to about 3 times the original rod length unidirectional crystallization was easier than original glass rods. These samples were crystallized in the axial direction at 15${\mu}{\textrm}{m}$/min in an electric furnace with a temperature gradient of about 3$0^{\circ}C$/cm at 57$0^{\circ}C$. Bending strengths of surface and unidirectionally crystallized samples were investigated with various CaO/$P_2O_5$ molar ratios. The bending strengths of unidirectionally crystallized samples were larger than those of surface -crystallized samples and the value of 47.5CaO.52.5 $P_2O_5$ was 1650kg/$cm^2$. XRD patterns showed that major phase is $\beta$-Ca(PO3) with minor phase 2CaO.$P_2O_5$ Relative crystal-linity of surface-crystallized sample was inversely propertional to the bending strenth. SEM of fracture surface of unidirectionally crystallized samples revealed an unidirectionally aligned structures.

• Structural Monitoring and Maintenance
• /
• 제6권1호
• /
• pp.47-66
• /
• 2019

One method of retrofitting concrete structures is to use fiber reinforced polymers (FRP). In this research, the shear, torsional and flexural strengthening of self-compacting reinforced concrete (RC) girders are fulfilled with glass fiber reinforced polymer (GFRP) and carbon fiber reinforced polymer (CFRP) materials. At first, for verification, the experimental results were compared with numerical modeling results obtained from ABAQUS software version 6.10. Then the reinforcing sheets were attached to concrete girders in one and two layers. Studying numerical results obtained from ABAQUS software showed that the girders stiffness decreased with the propagations of cracks in them, and then the extra stresses were tolerated by adhesive layers and GFRP and CFRP sheets, which resulted in increasing the bearing capacity of the studied girders. In fact, shear, torsion and bending strengths of the girders increased by reinforcing girders with adding GFRP and CFRP sheets. The samples including two layers of CFRP had the maximum efficiencies that were 90, 76 and 60 percent of improvement in shear, torsion and bending strengths, respectively. It is worth noting that the bearing capacity of concrete girders with adding one layer of CFRP was slightly higher than the ones having two layers of GFRP in all circumstances; therefore, despite the lower initial cost of GFRP, using CFRP can be more economical in some conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.274-279
• /
• 2000

The overhead transmission wires operating both at warm temperature and tighten state for a long period of time in a power transmission plant are degraded by air pollution, wind, creep and slip between steel wire and aluminium conductor. The objective of this study is to investigate a high carbon steel wire. We tested for basic mechanical properties and 3 types fatigue behavior, tension-tension, 4 points bending and 3 points bending fatigues. In this study, a conventional fatigue strengths between 4 points bending and tension-tension fatigue were determined by Gerber, Sorderberg and Goodman's theory and we investigated S-N diagram for bending and tensile loading.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.223-230
• /
• 2009

본 연구는 다양한 직경-두께비와 콘크리트 강도를 고려한 콘크리트 충전강관의 휨 거동을 다루었다. 유한 요소 해석을 위하여 상용 프로그램 LUSAS를 사용하였으며, 충전 강관의 콘크리트와 강 사이의 부착면의 상세거동을 고려하기 위하여 조인트 요소를 적용하였다. 또한, 콘크리트와 강관의 비선형성을 고려하기 위하여 소성영역에서 증가된 응력을 사용한 콘크리트와 강의 응력-변형률 곡선을 사용하였다. 제안된 방법으로 구한 수치해석 결과는 등분포하중을 받는 강관의 하중-변위 곡선에 대한 실제 실험 결과와 잘 일치하였다. 몇 가지 매개변수 연구는 서로 다른 직경-두께비와 콘크리트 강도에 대하여 휨 영향을 받는 콘크리트 충전강관의 구조적 특성에 초점을 두었다.