• Medical Lasers
• /
• 제10권4호
• /
• pp.220-228
• /
• 2021

Background and Objectives In designing a resistance exercise program, intensity, rest, and exercise volume are important. Many studies have been conducted to find the most suitable resistance exercise program incorporating the above, and in particular, many prior studies have been conducted on intensity. This study attempted to determine the effective volume of exercise by analyzing the number of repetitions performed at intensities of 65% one-repetition maximum (1RM) and 75% 1RM during the bench press exercise, and the electromyography (EMG) response of the agonist muscle. Materials and Methods Eight males in their 20s were selected as study subjects and they performed five sets of bench presses at two levels of intensity (65% 1RM, 75% 1RM). The following results were obtained by measuring the number of repetitions and the EMG response according to the exercise intensity and sets during the workout. Results First, the number of repetitions showed a sharp drop from the first set to the third set at 65% 1RM intensity and showed no change in the fourth and fifth sets. At 75% 1RM intensity, the intensity of hypertrophy showed a gradual decrease from the first set to the fifth set. Second, at 75% 1RM exercise intensity, the pectoralis major, anterior deltoid and triceps brachii showed high muscle activity, and the activity of the anterior deltoid continued to increase from the first set to the fourth set at 65% 1RM intensity, and from the first set to the fifth set at 75% 1RM. Conclusion It was found that during the bench press exercise, three minutes of rest at 75% 1RM intensity, five sets of five sets, one minute rest at 65% 1RM intensity, and three sets of the exercise were effective.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.715-742
• /
• 2017

Earth berms are often left in place to support retaining walls or piles in order to eliminate horizontal struts in excavations of soft soil areas. However, if the excavation depth is relatively large, an earth berm-supported retaining system may not be applicable and could be replaced by a multi-bench retaining system. However, studies on multi-bench retaining systems are limited. The goal of this investigation is to study the deformation characteristics, internal forces and interaction mechanisms of the retaining structures in a multi-bench retaining system and the failure modes of this retaining system. Therefore, a series of model tests of a two-bench retaining system was designed and conducted, and corresponding finite difference simulations were developed to back-analyze the model tests and for further analysis. The tests and numerical results show that the distance between the two rows of retaining piles (bench width) and their embedded lengths can significantly influence the relative movement between the piles; this relative movement determines the horizontal stress distribution in the soil between the two rows of piles (i.e., the bench zone) and thus determines the bending moments in the retaining piles. As the bench width increases, the deformations and bending moments in the retaining piles decrease, while the excavation stability increases. If the second retaining piles are longer than a certain length, they will experience a larger bending moment than the first retaining piles and become the primary retaining structure. In addition, for varying bench widths, the slip surface formation differs, and the failure modes of two-bench retained excavations can be divided into three types: integrated failure, interactive failure and disconnected failure.

• Membrane and Water Treatment
• /
• 제2권2호
• /
• pp.121-136
• /
• 2011

A bench-scale test has recently been proposed as a predictive tool to minimize the scope of pilot-scale testing or to optimize the operation of full-scale membrane filtration systems. Consequently, a bench-scale testing unit was developed for this purpose and systematically evaluated in this study. This unit was capable of accommodating commercially available, low pressure, hollow fiber (LPHF) membranes with various configurations for testing under conditions comparable to real-world applications. Reproducibility of this unit in assessing membrane fouling and microbial removal efficiency of LPHF membranes was tested and statistically comparable results were obtained. This unit serves as a useful apparatus for academic researchers and utilities to evaluate the performance of LPHF membranes used for water treatment.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.267-274
• /
• 2017

In this study was investigated of possibility using the recorded micro tremor data on ground level as ambient vibration input excitation data for investigation and application Operational Modal Analysis (OMA) on the bench-scale earthquake simulator (The Quanser Shake Table) for model steel structures. As known OMA methods (such as EFDD, SSI and so on) are supposed to deal with the ambient responses. For this purpose, analytical and experimental modal analysis of a model steel structure for dynamic characteristics was evaluated. 3D Finite element model of the building was evaluated for the model steel structure based on the design drawing. Ambient excitation was provided by shake table from the recorded micro tremor ambient vibration data on ground level. Enhanced Frequency Domain Decomposition is used for the output only modal identification. From this study, best correlation is found between mode shapes. Natural frequencies and analytical frequencies in average (only) 2.8% are differences.

• Earthquakes and Structures
• /
• 제16권3호
• /
• pp.321-327
• /
• 2019

This study investigated the possibility of using the recorded micro tremor data on ground level as ambient vibration input excitation data for investigation and application Operational Modal Analysis (OMA) on the bench-scale earthquake simulator (The Quanser Shake Table) for model chimney. As known OMA methods (such as EFDD, SSI and so on) are supposed to deal with the ambient responses. For this purpose, analytical and experimental modal analysis of a model chimney for dynamic characteristics was performed. 3D Finite element model of the chimney was evaluated based on the design drawing. Ambient excitation was provided by shake table from the recorded micro tremor ambient vibration data on ground level. Enhanced Frequency Domain Decomposition is used for the output only modal identification. From this study, best correlation is found between mode shapes. Natural frequencies and analytical frequencies in average (only) 1.996% are different.

• 운동영양학회지
• /
• 제23권2호
• /
• pp.34-44
• /
• 2019

[Purpose] The composition of protein supplements, the consumption timing immediately before and after resistance exercise training (RET), and the quantity of protein supplementation may be important factors for the im-provement of muscle mass and function. Although these factors should be considered comprehensively for effective improvement of muscular function in protein supplementation, relatively few studies have focused on this area. Therefore, this study was designed to investigate whether a protein blend supplement before and after resistance exercise for 12 weeks would be effective in increasing muscular function. [Methods] In total, 18 participants were randomly assigned to a placebo (PLA) or protein blend supplement (PRO) group. All subjects followed the same training routine 3 times per week for 12 weeks, taking placebo or protein supplements immediately before and after each exercise session. The protein supplement consisted of 40 g of blend protein, including hydrolyzed whey protein. The RET consisted of lower body (barbell squat, dead lift, seated leg extension, and lying leg curl) and upper body (bench press, barbell rowing, preacher bench biceps curl, and dumbbell shoulder press) exercises. A repetition was defined as three sets of 10-12 times with 80% of one repetition maximum (1RM). [Results] Although the PRO group had a lower protein intake in terms of total food intake than the PLA group, the mean changes in muscle circumference, strength, and exercise volume increased, especially at week 12, compared to the PLA group. [Conclusion] These results suggest that the composition and timing of protein intake are more important than the total amount.

• Clinics in Shoulder and Elbow
• /
• 제5권2호
• /
• pp.73-80
• /
• 2002

Purpose: Weight lifting is a good training to control body weight, to correct body shape and to relieve stress. How-ever if the training is continued by inadequate training method and technique, the risks of the shoulder injuries are relatively high. Main Subject: The rotator cuff injury is the most common disorder to wright lifters and often results from the train- ing program of upright row, military press and pectoral deck. The chances of subacromial impingement in these postures are high because the shoulder rotates under the acromion at 90 abduction state. Shoulder instability in weight lifters can develop due to various causes. aepeated microtrauma and excessive abduction and external rotation may result in laxity of the anterior capsular structure, ligament and muscles. Behind the neck and bench press are high risk training postures. Other than those injuries, idiopathic osteolysis of distal clavicle, acromioclavicular separation, pectoralis major muscle rupture, and triceps muscle rupture nay develop. Conclusion: The best treatment option of the shoulder injury to weight lifters is to eliminate the possible risk elements for the weight lifters in training program and to provide proper and prompt treatment as soon as possible.

• 한국미생물·생명공학회지
• /
• 제17권6호
• /
• pp.556-562
• /
• 1989

The bioconversion of mandarin orange peel press liquor to single cell protein (SCP) by two yeast strains, F-60, and C-7, which were isolated from mandarin orange peel was carried out and compared with that of using Candida utilis IFO 0598. Experiments were directed toward the high yield of biomass and high protein in cultures of the strains mentioned above. Candida utilis IFO 0598, F-60 and C-7 strains were cultivated at 3$0^{\circ}C$, pH 5.2 for 3 days in shaking flasks. The effects of some nutrients on cell growth were studied. Cell mass and protein content per cell mass were increased by addition of urea 1%, KH$_2$PO$_4$ 0.1% and MgSO$_4$ㆍ7$H_2O$ 0.05%, When the F-60 strain cultured under the optimal conditions, cell mass, growth yield and protein content were 41.2g/l, 53.9%, 59.7%, respectively. Cell mass was also increased up to 15% by modifying the fermentation condition on the bench type 20l jar fermentor. Crude fat content (10.3%) of dried C-7 cell was higher than those of C. utilis and F-60, 4.9% and 5.6% respectively. Total protein content of the F-60 strain was 59.7% per dry weight. And we compared their amino acid compositions with that of FAO provisional pattern. In the case of the F-60 strains, amino acid contents such as lysine, leucine and isoleucine were much higher than those of methionine, cystine and tryptophan.

• 대한물리의학회지
• /
• 제17권1호
• /
• pp.31-39
• /
• 2022

PURPOSE: This study examined the changes in the blood fatigue variables caused by isokinetic and isotonic exercise training. METHODS: Ten healthy adult males with at least one year of athletic experience participated. The participants performed the isokinetic circuit exercise program first, followed by an isotonic circuit exercise program. A two-hour break was allowed between the isokinetic circuit exercise program and the isotonic circuit exercise program. The circuit exercise program consisted of four items (Squat, Deadlift, Shoulder press, and Bench press). The blood samples were analyzed for the LDH, CPK, and Cortisol levels. RESULTS: The LDH level in the isokinetic group was significantly different from the isotonic group. In particular, the change in LDH level in the isokinetic group was 33.30% lower than that of the isotonic group. The serum CPK level of the isokinetic group showed a 10.03% lower decrease than the isotonic group, but the difference was not significant. The Cortisol level was relatively unchanged in the isotonic group, but it decreased in the isokinetic group. On the other hand, the Cortisol level did not show a significant difference between the two groups. CONCLUSION: The isokinetic group showed alleviation of the three indices, unlike the isotonic group. Further studies associated with the changes in blood fatigue variables through various exercise programs and exercise intensity will be needed.

• Smart Structures and Systems
• /
• 제6권4호
• /
• pp.389-403
• /
• 2010

By using image recognition technology, this paper presents a new fault diagnosis method for rotating machinery with artificial immune algorithm. This method focuses on the vibration state parameter image. The main contribution of this paper is as follows: firstly, 3-D spectrum is created with raw vibrating signals. Secondly, feature information in the state parameter image of rotating machinery is extracted by using Wavelet Packet transformation. Finally, artificial immune algorithm is adopted to diagnose rotating machinery fault. On the modeling of 600MW turbine experimental bench, rotor's normal rate, fault of unbalance, misalignment and bearing pedestal looseness are being examined. It's demonstrated from the diagnosis example of rotating machinery that the proposed method can improve the accuracy rate and diagnosis system robust quality effectively.