• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1097-1100
• /
• 2003

Tunable thermo-optic filter for WDM system was designed and fabricated. The basic structure of the filter was a Fabry-Perot resonator and the center cavity layer was poly-Si. Quardraple layers of low and high refractive index materials were used as DBR mirrors. Tuning and transmission efficiencies was measured and compared with the simulation results. Tuning range of 9.4 nm can be obtained by 64.7$^{\circ}C$ temperature changes and tuning efficiency was 0.144nm/K. The filter is to be assembled onto the micro optical bench with fiber optical path.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.228-231
• /
• 2004

The optical bench was designed using composite material, M40J/Cyanate Ester. Mechanical tests, thermal tests were carried out for M40J and structural vibration FEM analysis was performed. From the experimental results, the material properties of M40J/Cyanate Ester were obtained in longitudinal and transverse directions. By applying the properties into FEM vibration analysis, a proper stacking sequence was proposed for the laminated facesheets, so that natural frequency of the platform structure satisfy the design specification.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.177-181
• /
• 1992

For this study, a new hydraulic control unit which designed in compact compared to the currently manufactured hydraulic control unit for ABS has been introduced and its experimental model has been made. Based on the basic principle as ABS using braking force characteristics against slip ratio of tire, half car model bench tester were designed and made to make an analysis of braking effect of the new hydraulic control unit. Experiment for slip ratio characteristics of tire has been carried out using half car model bench tester and with the results of this experiment and control experiment of the new hyraulic control unit, the experiment result of the characteristics of tire and control experiment were compared to find out their correspondence. And furthermore, slip ratio characteristics of the new hydraulic control unit has been studied based on the experiment result of slip ratio characteristics of tire through simulation and compared with experiment result.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.496-501
• /
• 2015

In this study, calibration procedure of power assembly tools is suggested and methods are developed for calculating measurement uncertainty. Fist of all, the calibration of joint simulator bench (JSB) was carried out for maintaining traceability and the uncertainty components of JSB were analyzed. The influences of tool speed, tolerance, temperature and length of the adapter were examined by the torque measurement values through experiments. From this research, credibility for calibration results could be enhanced. This experimental results, being used as an effective tool for calibration of power assembly tools, will provide and improve the accuracy of the use of the power assembly tools.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1997.10a
• /
• pp.59-65
• /
• 1997

Bench Scale급 석탄가스화기에서 배출된 slag의 거동을 살펴보기 위해서 Drayton탄(호주)과 Kideco탄(인도네시아)으로부터 생성된 slag의 조성, 형상, 잔존탄소함량 및 중금속 성분들을 분석하였다. Drayton탄 slag는 표면이 매끄럽고 다공성을 띄며 crack이 거의 없었고 결정구조가 비정형(amorphous)인 반면에, KIDECO탄 slag의 경우는 표면이 거칠고 crack이 상당히 많이 존재하는 것으로 나타났다. Slag중에 함유된 잔존탄소함량은 두 대상탄 모두 1% 이하를 보임으로써 slag의 재활용 기준인 3%를 만족하였다. Slag 재활용시 중금속의 2차적인 환경오염을 우려하여 석탄중에 포함된 중금속 함량 분석결과 대부분의 중금속이 slag중에 용융되어 안정한 화합물로 존재하고 있었으며, slag의 용출수 분석결과 중금속으로 인한 2차 환경오염 문제는 없을 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.391-394
• /
• 2007

Wind turbine gearbox is a complex mechanical system that includes gear trains, shafts, bearings, and gearbox housings. All these components are interacting with each other therefore it is important to assess the whole performance by considering the individual component design. In this paper, the performance assessment of 2MW wind turbine gearbox was conducted under various operating conditions at test bench and test result was compared with the design calculation.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.5
• /
• pp.303-305
• /
• 2003

Scale-up of hirudin production from Saccharomyces cerevisiae from bench-scale to pilot-scale was carried out based on constant volumetric oxygen transfer coefficient (K$\sub$L/a). Fed-batch mode of cultivation using step-wise feeding strategy of galactose was employed for the production of hirudin in a 30-L and a 300-L pilot-scale fermentor. The final hirudin concentrations were achieved 390 mg/L and 286.1 mg/L, and the volumetric productivities were 80.4% and 90.7% with the 30-L and 300-L fermentors, respectively, compared to the productivity of the 5-L bench-scale fermentor.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.6
• /
• pp.319-325
• /
• 2009

The purpose of this study is to investigate the performance characteristics of a bypass two-circuit refrigerator. A bench scale refrigeration system was designed and constructed to estimate possible performance improvement of the bypass two-circuit refrigerator. The experiments were conducted in the bench scale refrigeration system by varying capacity of the condenser and refrigerant charge amount with an adoption of a refrigerant storage vessel. The COPs of the bypass two-circuit refrigeration system in the refrigerator and freezer (RF)-mode and freezer(F) only-mode were increased by 10% and 17%, respectively, with increasing the capacity of the condenser. Besides, the COP of the system in the F only-mode was increased by 10% by adopting the refrigerant storage vessel.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.19-33
• /
• 2002

In this Paper, we described the Parwan CPU using a VHDL at the behavioral level and then described by connecting CPU components at the dataflow level. Finally, we simulated to verify of execution of a CPU processor using a test-bench method. A presented design method was to enable information exchange of design and representation of operation were very exact and simple. Also. a documentation of design was available and it was easy that verify a operation of designed processor. The behavioral description of VHDL aids designer as we verify our understanding of the designed system, while the dataflow description can be used to verify the bussing and register structure of the design.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.4
• /
• pp.32-37
• /
• 2008

For the bucket tip position control of the excavator, a traditional hydraulic excavator system was exchanged into an electro-hydraulic one. EPPR valves are attached to the traditional MCV and hydraulic joysticks are replaced by electronic ones to develop the electro-hydraulic system. To control the electronic pump with a good performance, the control logic for the pump is deduced from the AMESim simulation and the experimental method on the test bench. To get a good position control performance of the excavator bucket tip, PI+AntiWindup controller is selected as a position controller. The experimental results showed the good controllability for the electro-hydraulic excavator system on the test bench.