• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2000년도 제14회 학술강연논문집
• /
• pp.13-13
• /
• 2000

일반적으로 고체추진 로켓 모타의 개발단계 때 공통적으로 수행되는 주시험(main test)으로는 추력, 압력, 회전률 등의 성능측정을 하기 위한 정적연소시험(static firing test), 내부 정수압(hydrostatic pressure)에 의한 폭발 압력 시험, 연소중이나 연소 후 케이스에 대한 굽힘 강성 시험, 이외에 노화 시험, 환경시험 등이 요구된다. 그러나 신궁과 같은 휴대용 대공 시스템의 추진기관 개발의 경우에는 사수를 보호하기 위해 여러 가지 안전장치들이 설계되고, 이러한 장치들의 성능에 대한 요구 조건들을 확인하기 위한 특수시험(specific test)들이 필요하게 된다. 이러한 특수시험을 위한 각종 시험대들을, 위에서 언급한 주시험을 위해 사용되는 정적시험대(static test bench)들과 구분하기 위해 동적 시험대(DTB : Dynamic Test Bench)라고 한다. 본 연구에서는 신궁 추진기관의 사출모타 점화에서 비행모타 점화에 이르는 일련의 비행절차를 확인하기 위한 동적 시험대 설계 및 제작, 계측장치 구성 및 데이터 획득 방법 등에 관한 내용을 소개하며, 동적 시험대에서 수회에 걸쳐 수행된 동적 시험 결과를 분석/정리하였다.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.18-25
• /
• 1998

This paper performed stress analysis and bench test for the LOWER ARM of H' type which was improved on LOWER ARM with the section of H type. And we investigated the safety of the section of H' type. The results of this study are as follows ; The section of H' type satisfied the required safety factor and has the highest stress value on the B part of the LOWER ARM. And the magnitude is similar to the fatigue strength of the GCD45(300㎫). Hence, the H' type has an advantage to reduce the cost of production.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 추계학술발표회 논문집
• /
• pp.123-128
• /
• 1996

Bench Scale급 건식 가스화기에서 중국 Datong탄과 미국 Alaska Usibelli탄으로부터 생성된 Slag의 구조적인 특성과 화학적인 특성을 조사하였다. Datong slag은 표면이 매끄럽고 검으며 속이 약간 비어 있는 구형을 띄고 있고 Alaska Usibelli탄으로부터의 slag은 속이 조밀하게 차여있는데, 이들 slag의 내부는 Datong, Alaska Usibelli탄 두 경우 다 회분이 결정화된 형상의 특징을 보여주고 있다. 그리고 Cu, Zn외 11가지 중금속이 slag에 다량으로 농축되어 제거되었음을 알 수 있었으며, slag들의 침출여부를 조사하기 위하여 용출시험을 수행한 후 용출액에 대하여 중금속 분석을 한 결과 대부분 중금속들은 검출되지 않았다. 내화재의 주성분인 Cr이 slag에 포함되어 나오는 것으로 측정되었으나 용출시험 결과 검출이 안되어 2차오염에는 전혀 문제가 없음이 입증되었다. 따라서 건식 가스화기로부터 생성된 slag을 재사용할 때, 용출되는 중금속에 관한 2차 환경오염이 유발되지 않을 것으로 확인되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.913-917
• /
• 2007

The turbocharger for a vehicle is consisting of a centrifugal compressor and turbine. These compressor and turbine are vibrating and emitting noises through the T/C body, exhaust system (Catalyst, Bellows, Pipe, etc) and Intake system (Hoses, Intercooler pipes, Intercooler) as rotating. A turbocharger cold test bench is constructed to reduce these noises, especially for the purpose of realizing transient operating environment and oil temperature control to simulate the vehicle operating characteristics with intake system and exhaust system. This research laid the groundwork to develop a lower noise level T/C through understanding the mechanism of the noise source of T/C.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.75-78
• /
• 2004

Engine power cylinder parts are faced with more severe wear and friction environment. For instance, emission gas recirculation (EGR), one of the most valid technologies related to emission legislation, is known to accelerate wear of piston ring and cylinder liner. Therefore, advanced materials and surface treatments have been developed and adopted successively so that a need exists for an accurate and repeatable friction and wear bench test for various combination of piston ring and cylinder liner that more closely relates to engine test result. This paper introduces accelerative bench wear test method for piston ring and cylinder liner, presents the experimental result of friction and wear properties of piston ring surface treatments that noticed in substitution for hard chrome plating.

• 화약ㆍ발파
• /
• 제23권2호
• /
• pp.37-44
• /
• 2005

현지암반 조건 중에서 자연상태 암석블록의 크기와 절리방향은 다른 요인들에 비해 상대적으로 암석파쇄도에 큰 영향을 미치는 것으로 최근의 연구에서 확인되었다. 이러한 최근의 연구결과를 검증하기 위해 이 연구에서는 고강도 시멘트 몰탈 재료의 축소 모형을 이용한 발파실험을 실시하였다. 실험 결과 절리간격이 같을 때 절리방향에 따라 암석의 파쇄도가 달라지며, 절리간격에 따라 파쇄도에 차이를 보이는 등 현장조사에서 얻어진 것과 같은 결과를 얻었다.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.267-274
• /
• 2017

In this study was investigated of possibility using the recorded micro tremor data on ground level as ambient vibration input excitation data for investigation and application Operational Modal Analysis (OMA) on the bench-scale earthquake simulator (The Quanser Shake Table) for model steel structures. As known OMA methods (such as EFDD, SSI and so on) are supposed to deal with the ambient responses. For this purpose, analytical and experimental modal analysis of a model steel structure for dynamic characteristics was evaluated. 3D Finite element model of the building was evaluated for the model steel structure based on the design drawing. Ambient excitation was provided by shake table from the recorded micro tremor ambient vibration data on ground level. Enhanced Frequency Domain Decomposition is used for the output only modal identification. From this study, best correlation is found between mode shapes. Natural frequencies and analytical frequencies in average (only) 2.8% are differences.

• 대한조선학회논문집
• /
• 제40권1호
• /
• pp.1-7
• /
• 2003

The effect of the passive anti-rolling tanks(ART) decreases when the roll period of the vessel does not match the designed oscillating period of the fluid in the tank. In order to improve the effect of the passive ART, the damping plates are installed in the lower duct of the ART to adjust the oscillating period of the fluid. The effects of the damping plates on the oscillating period of the fluid and the changes of the stabilizing moments are examined through the series of bench tests. Acryl model tank larger than 1m breadth is made to minimize the viscous effect of the tank and the stabilizing moments of the tank are measured for various roll angles. Using the obtained tank damping coefficient, RAO(Response Amplitude Operator) value in the resonance range is computed and the stabilizing effect of a ART has been estimated.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.33-39
• /
• 1997

In order to establish a new temperature criterion to prevent the pistons from ring sticking due to deposit formation, bench test and engine test were performed. The effects of oil degradation and temperature on deposit formation was studied by a modified panel coking test. Oil degradation was analyzed by FTIR. Oil oxidation and nitration were selected as a factors to evaluate oil degradation. Bench test results show that oil oxidation is more effective to the deposit formation than oil nitration. And the temperature increase accelerates deposit formation and deposit formation increase rapidly above 26$0^{\circ}C$. Especially, in case of degraded oil, the deposit formation increases so rapidly that ring sticking can occur. The effect of piston temperature on the deposit formation was confirmed by engine test.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.97-107
• /
• 1998

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. Braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two sizes of brake discs in stop and hold braking modes. And Plasma spray coating technique was used to coat ceramic powder on the discs. In the test four commercial brake pads were coupled with discs. Ceramic coated discs had shown good stability in friction coefficient at high speed and high energy braking conditions. But they caused large pad mass wear loss compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc, it had shown fluctuating friction coefficient at high speed but a fittie pad mass wear loss compared with ceramic coated discs.