• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.60-65
• /
• 2003

At present. welding of most pipes with large diameter is carried out by the manual process. Automation of the welding process is necessary f3r the sake of consistent weld quality and improvement in productivity. In this study, two vision sensors, based on the optical triangulation, were used to obtain the information for seam tracking and detecting the weld defects. Through utilization of the vision sensors, noises were removed, images and 3D information obtained and positions of the feature points detected. The aforementioned process provided the seam and leg position data, calculated the magnitude of the gap, fillet area and leg length and judged the weld defects by ISO 5817. Noises in the images were removed by using the gradient values of the laser stripe's coordinates and various feature points were detected by using an algorithm based on the iterative polygon approximation method. Since the process time is very important, all the aforementioned processes should be conducted during welding.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.185-188
• /
• 2006

An investigation of the ejector-jets focusing on its flow properties was carried out by varying the geometric parameters. The area ratio of the primary nozzle, AR that was tested in the present measurement was 2.17 and 3.18, while the ratio of the length to the diameter of the duct downstream the primary nozzle inlet, L/D had values of 3.41, 6.82, and 10.23. For the frame work of flow characteristics, the wall pressures distribution of ejector-jet was investigated by experiment for basic study of ejector-jet performance. In result, terminal shock location and existence of series of oblique shocks are recognized. In this study, CFD analysis was conducted at the same time. And as a result of comparison experiment data with CFD analysis, the physical phenomena of ejector-jets were estimated.

• Journal of computational fluids engineering
• /
• v.12 no.2
• /
• pp.46-52
• /
• 2007

An experimental and numerical investigation of the ejector-jets focusing on its geometric parameters that effect on thrust performance was carried out. The area ratio of the primary nozzle that was tested in the present study was 2.17 and 3.18, while the ratio of the length to the diameter of the duct downstream the primary nozzle inlet had values of 3.41, 6.82, and 10.23. Internal flow properties of ejector-jet were estimated by comparison experiment data and CFD analysis for basic study of ejector-jet thrust performance. For examination of thrust performance, the thrust ratios increased with increase in L/D. Especially at AR=2.17, the maximum thrust augmentation was 33 percent for the shortest L/D. It is expected that the increase of mixing duct length of ejector-jet will be helpful in a thrust performance by improving mixing efficiency.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.166-170
• /
• 2007

An experimental and numerical investigation of the ejector-jets focusing on its geometric parameters that effect on thrust performance was carried out. The area ratio of the primary nozzle that was tested in the present studywas 2.17 and 3.18, while the ratio of the length to the diameter of the duct downstream the primary nozzle inlet had values of 3.41, 6.82, and 10.23. Internal flow properties of ejector-jet were estimated by comparison experiment data and CFD analysis for basic study of ejector-jet thrust performance. For examination of thrust performance, the thrust ratios increased with increase in L/D. Especially at AR=2.17, the maximum thrust augmentation was 34 percent for the shortest L/D. It is expected that the increase of mixing duct length of ejector-jet will be helpful in a thrust performance by improving mixing efficiency.

• Computers and Concrete
• /
• v.28 no.6
• /
• pp.559-566
• /
• 2021

In this paper, frequency analysis has been done for functionally graded cylindrical shell with ring supports using Sander's shell theory. The vibrations of rotating cylindrical shells are analyzed for different physical factors. The fundamental natural frequency is investigated for different parameters such as: ratios of length-to-diameter ring supports. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing height-to-radius ratio. The frequencies for different position of ring supports are obtained in the form of bell shaped. The backward frequencies increases and forward frequencies decrease on increasing the rotating speed. The results generated furnish the evidence regarding applicability of present shell model and also verified by earlier published literature.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.1-16
• /
• 1999

Differential equations and its numerical solution program using Turbo-C were formulated to describe the radical distribution and average displacement amplitude of vibrating dehydrated contact lens(HEMA) driven by sinusoidal or rectangular pressure. The natural resonant frequency of the lens diaphram(thickness 0.08mm, diameter 14mm, curvature radius 8mm) was measured to be 5730 Hz from the extrapolation of frequency vs addedmass to the diaphram curve. The Young's modulus of the lens was measured to be $4{\times}10^9$ Pa with altering the original shape. The effect of parameters such as thickness, effective radius, damping coeff., amplitude of driving pressure on the vibration characteristics was illustrated by the computer simulation of the derived program. When the frequency of driving pressure coincides with the integral multiple of fundamental resonance frequency of the lens the wave pattern changes from arc to bell-shape along the radial position of the diaphram. If this happens to the contact lens on the cornea in vivo, it might create the feel of pull of the lens due to the increased rise of central part of the lens.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.507-514
• /
• 2001

Two experiments were carried out to investigate whether duckweed is useful as a dietary protein source for fine-wool Merino sheep and to evaluate its effects on wool yield and characteristics. In Experiment 1, the sheep were given one of three maintenance diets consisting of oaten chaff (520-700 g/d) supplemented with 16-32 g crude protein/d in the form of fresh (1 kg/d) or sun-dried (50-100 g/d) duckweed. Each ration was estimated to provide 5.4 MJ (1.3 Mcal)/d of metabolisable energy (ME). The sheep readily ingested the fresh or dried duckweed. None of the wool measures (yield, rate of fibre elongation, fibre diameter) differed (p>0.05) between dietary treatments. In Experiment 2, oaten-chaff-based diets (800 g/d) supplying 6.5-7.2 MJ (1.6-1.7 Mcal)/d of ME were supplemented with iso-nitrogenous amounts (4-5 g N) either of urea (8 g), cottonseed meal (60 g) or dried duckweed (100 g). In this experiment, the rate of wool fibre elongation, thought to be related to intestinal amino acid absorption, was lower (p<0.05) for sheep given the oaten chaff/urea diet than for those given either oaten chaff/cottonseed meal or oaten chaff/duckweed for which the rates did not differ (p>0.05). Fibre diameter, which ranged from 16.0-16.7 mm, did not differ (p>0.05) between diets, but tended to be lower on the oaten chaff/urea diet so that volume of wool produced was also significantly lower (p<0.05) on this diet than on the diets containing duckweed or cottonseed meal. Rumen ammonia concentrations at 4.5 and 7.5 h after feeding were higher (p<0.05) for sheep given the oaten chaff/urea diet than for those given the other two diets. A comparison of the rumen ammonia concentrations, wool growth rate and predicted flows of amino acids from the rumen of sheep supplemented with duckweed rather than cottonseed meal suggested that duckweed is a valuable source of 'escape protein' for ruminants.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.576-583
• /
• 2009

Based on the stem analysis and biomass measurement of 36 trees and 1,576 branches in Pinus sylvestris var. mongolica (Mongolian pine) plantations of Northeast China, this study was conducted to develop estimation model equation for leaf biomass of a single tree and branch, to examine the vertical distribution of leaf biomass in the crown, and to evaluate the proportional ratios of biomass by tree parts, stem, branch, and leaf. The results indicated that DBH and crown length were quite appropriate to estimate leaf biomass. The biomass of single branch was highly correlated with branch collar diameter and relative height of branch in the crown, but not much with stand density, site quality, and tree height. Weibull distribution function would have been appropriate to express vertical distribution of leaf biomass. The shape parameters from 29 sample trees out of 36 were less than 3.6, indicating that vertical distribution of leaf biomass in the crown was displayed by bell-shaped curve, a little inclined toward positive side. Apparent correlationship was obtained between leaf biomass and branch biomass having resulted in linear function equation. The stem biomass occupied around 80% and branch and leaf made up about 20% of total biomass in a single tree. As the level of tree class was increased from class I to class V, the proportion of the stem biomass to total biomass was gradually increased, but that of branch and leaf became decreased.

• Journal of Bio-Environment Control
• /
• v.6 no.1
• /
• pp.15-25
• /
• 1997

Plug seedlings of bell pepper(Capsicum annuum L.) were grown for 50 days in controlled environment chambers under 12 hrs per day photoperiodic condition with sixteen different day and night temperature regimes to investigate the possibility of height control. The seedlings were then transplanted to greenhouse to investigate the growth, flowering, and yield afterward. Plant height and stem length of seedlings were mainly affected by day temperature rather than night temperature. Internode elongation was suppressed by a negative DIF and was enhanced by a positive DIF even with the same average daily temperature (ADT). Leaf unfolding rate was influenced more by ADT than by DIF. Fresh and dry weights increased as ADT increased. Leaf area and stem diameter increased until temperature increased up to 24$^{\circ}C$ day and night temperature and decreased above 24$^{\circ}C$, The position at which the first flower was initiated was lowered as ADT increased. The first flower degeneration was not obvious up to 24$^{\circ}C$ ADT but increased rapidly above 24$^{\circ}C$ ADT. Seedling compactness(Dry weight per plant height :mg.mm$^{-1}$ ) was greater under -DIF than +DIF condition. In conclusion, DIF treatment was an applicable technique to control stem elongation and growth rate such as leaf unfolding rate and position at which first flower was initiated could be controlled by ADT.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.153-162
• /
• 2010

Abies holophylla Maxim. is a shade tolerant species that has potential to be used for continuous cover forestry system. Stand structure and natural regeneration of A. holophylla stands in Yong-In area located in the central part of Korea was investigated to estimate the self sustainability of A. holophylla plantation. Species composition, diameter at breast height (DBH) and height distribution of trees larger than 2 cm DBH were measured in ten stands in three study sites of Jeongsu-ri, Daedae-ri, and Hodong. Species and coverage of shrub layer, and A. holophylla seedlings were also investigated. While A. holophylla in non-managed stands (Jengsuri and Daedae-ri study sites) had the importance value of 40% and showed continuous diameter and age distribution, A. holophylla in Hodong site had narrow bell-shaped DBH distribution mostly concentrating between 25-35 cm DBH classes, and single canopy structure. Abies holophylla stands in Hodong have experienced occasional thinning and selective cutting. The correlation coefficient between age-DBH was significant but low ($R^2$=0.2, P=0.03), and similar aged A. holophylla had diverse DBH values. Continuos DBH distribution and multi-canopy structure of A. holophylla stands in Jeongsu-ri site show that natural regeneration of A. holophylla has been continuously occurred in this area. Seedling density of A. holophylla was between 2000 and 33000/ha, however, the number of trees in 2-5 cm DBH class was only 40-150 trees/ha, implying that the survival rate of seedlings is not high. Continuous natural regeneration and 0.6 cm/year of diameter growth rate of A. holophylla indicate that this area could be an appropriate habitat for this species, and A. holophylla plantation in this region seem to persist suggesting the possibility of managing the stands for continuous cover forestry system as well as selective harvesting practices.