• 생명과학회지
• /
• 제19권5호
• /
• pp.581-586
• /
• 2009

고랭지 파프리카 재배 초기에 기형과 및 단위결과 과실이 많이 발생하는데 야간 저온이 화분 활력 및 생식기관 발달에 미치는 영향을 알아보고자 본 연구를 수행하였다. 주간 $28^{\circ}C$ 동일 조건에서 야간온도를 $13^{\circ}C$ (LNT)와 $20^{\circ}C$ (ONT)로 달리 처리하여 생장상에서 파프리카(Capsicum annuum cv. Plenty)를 재배하였다. ONT와 LNT에서 화분을 채취하여 10, 15, 20, 25, $30^{\circ}C$에서 발아시켰다. 24시간 후 화분의 활력을 살펴 본 결과, 처리에 관계 없이$25^{\circ}C$ 에서 화분 활력이 가장 좋았고 다음이 $30^{\circ}C$였다. $25^{\circ}C$에서 발아율은 ONT화분이 42%, LNT 화분이 21%였다. 화분관 신장길이는 화분발아 온도에 관계 없이 ONT화분이 가장 길었다. 화분관 신장 속도는 $25^{\circ}C$ 에서 발아시킨ONT화분이 가장 빨랐다. 파프리카가 재배된 ONT와 LNT 조건에서 화분 활력의 차이를 알아보기 위해 배지에 화분을 치상 후 ONT와 LNT에서 화분발아 시험을 실시하였다. LNT에서는 야간($13^{\circ}C$) 동안 화분이 발아되지 않았지만 주간($13^{\circ}C$)조건으로 전환되자 화분이 발아되기 시작하였다. 하지만 ONT에서는 야간($20^{\circ}C$) 초기부터 화분이 발아되기 시작하여 주간($28^{\circ}C$)까지 계속 발아가 진행되었다. LNT에서는 과병길이, 자방지름, 수술길이, 화중 및 과중이 증가하였다. 종자수는 처리간 차이가 없었다. LNT처리구에서도 종자가 잘 형성되었던 것은 주간에 수분수정이 이루어졌기 때문인 것으로 보여지지만 기형과나 단위결과 발생 방지를 위해서는 화분발아를 저해하는 저온범위에 대한 정밀한 연구가 수행되어야 할 것으로 보여진다.

• 한국광물학회지
• /
• 제19권3호
• /
• pp.189-195
• /
• 2006

황철석에 대한 압축성 연구를 다이아몬드 앤빌 기기 및 방사광을 이용하고 에너지분산 X-선회절법을 적용하여 상온에서 시행하였다. 황철석의 체적탄성률은 실험조건과 실험기기에 따라 매우 큰 변이를 보이고 있는데 이는 압력전달매체의 특성에 따른 것으로 알려져 있다. $FeS_{2}#1$(황철석+NaCl)과 $FeS_{2}#2$(황철석+MgO)에 대해 압력전달 매체로 각각 NaCl과 유체를 이용하여 체적탄성률 138.9 GPa와 198.2 GPa를 각각 얻었다. 이러한 값은 시료방의 압력상태에 따른 예측 결과치에 대치되는 것으로 그 원인은 압력전달액체의 상변이에 따른 것으로 추정되며 이외에 고상검출기의 차이, E*d값의 차이 등도 영향을 미친 것으로 판단된다. 모든 실험은 포항가속기연구소 1B2 빔라인에서 시행되었다.

• 한국추진공학회지
• /
• 제19권3호
• /
• pp.47-53
• /
• 2015

이론성능해석을 통하여 메탄/산소 이원추진제 소형로켓엔진의 형상설계에 필요한 설계인자들을 도출하였다. 로켓엔진의 이론성능 분석을 위해 CEA를 이용하였고, 추력실 내부의 화학반응을 화학평형 상태로 가정하여 엔진의 형상설계에 필요한 최적의 추진제 혼합비, 특성길이, 최적 팽창비 등을 도출하였다. 인젝터의 경우, 미립화 성능이 우수하고, 다른 인젝터 형상에 비해 연소효율이 높은 스월 동축 인젝터를 설계하였다. 노즐형상은 80%의 길이를 갖는 벨형 노즐을 설계하였고, 추력실 내부압력 1.72 MPa, 총 추진제 질량유량 0.18 kg/s, O/F ratio 2.7일 때의 지상연소시험용 로켓엔진의 형상설계 결과를 제시한다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권2호
• /
• pp.153-162
• /
• 2002

Earlier breeding experiments undertaken at Central Sericultural Research and Training Institute, Mysore, India since a decade had resulted in the development of many productive and qualitatively superior bivoltine hybrids. However, the hot climatic conditions of tropics prevailing particularly in summer are not conducive to rear these high yielding bivoltine hybrids. This has necessitated breeding of compatible bivoltine hybrids for year-round rearing. Accordingly, the Japanese hybrid, B2Ol ${\times}$ BCS12 which was found to be tolerant to high temperature was used as breeding resource material. Following hybridization and selection rearing of silkworms was taken up in SERICATRON (Environmental chamber with precise and automatic control facilities for uniform maintenance of temperature and humidity) at high temperature of $36{\times}1^{\circ}C$ and 85${\times}$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65{\times}$5% RH. Directional selection was resorted to the batches reared at 36$\pm$1$^{\circ}C$ till F$_{5}$ keeping pupation rate as important selection criteria. From $F_{2}% onwards the experiment was modified in such a way as to conduct normal rearing every alternate generation to regain the lost vitality due to continuous exposure to high temperature and high humidity stress. At $F_{2}$ , Oval and dumb-bell cocoons were separated out and designated as CSR18 and CSR19, respectively. By utilizing these lines at $F_{12}$, the hybrid CSR18$\times$CSR19 was prepared and studied for the thermotolerance by subjecting to stress condition at high temperature of 36$\pm$1$^{\circ}C$ and 85$\pm$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65${\times}$5% RH. The better performance of CSR18${\times}$CSR19 (survival > 88%) at $36{\times}1^{\circ}C$ clearly indicates the general superiority of CSR18${\times}$CSR19 with regard to high temperature tolerance over the productive hybrids and CSR18$\times$CSR19 can perform well in varied agro-climatic conditions of the tropics with optimum qualitative and quantitative characteristics.s.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 춘계 학술발표대회
• /
• pp.131-132
• /
• 2003

Leaf discs and apical meristems were cultured in Murashige and Skoog (MS) medium supplemented with cytokinin and auxin at different concentrations. Callus production was observed in all tested media after six days of incubation. Callus produced in the presence of high concentration of NAA (2.0mg/1) was fragile in texture and yellow in colour. Highest callus formation was observed from leaf discs in the medium supplemented with 1.0mg/1 NAA and 0.5 mg/l BAP in dark at $25{\pm}1{\circ}C$. Percentage of callus formation was 95% and mean callus fresh weight was 654.88 43.53 mg. Shoots were induced from the callus after 4 weeks in 1/2MS medium supplemented with BAP and kinetin both at 0.5mg/1. When elongated shoots were separated and transferred into multiplication medium (MS+0.5mg/1 BAP+0.5mg/1 kinetin) multiplication rate was 6.4 after 6 weeks. Higher concentrations of BAP caused callus production at the base. Direct shoot induction was observed from apical meristems in MS medium in the presence of 0.175 mg/1 IAA + 2.25mg/1 BAP and 0.175 mg/1 IAA + 3.0 mg/1 BAP in 16 hour day at $25{\pm}1{\circ}C$. Explants (apical meristems) elongated to form a single shoot forming a callus at the base. Adventitious buds were sprouted out from the base. Percentage explants which producing shoots was 28.57 and 65.5 respectively. Multiple shoot induction was also observed in the same media. Highest multiple shoot production was observed in the presence of 0.175 mg/l IAA and 3.0mg/l BAP, Mean number of shoots per explant was 5.36 and the mean shoot length was $16.66{\pm}4.15$mm. Shoots (20 30m length) were tested for root induction. Excised shoots were transferred into rooting media, which contains different concentrations of NAA and IAA. Best rooting performance was observed in 1/2MS medium supplemented with 0.1mg/1 NAA after 10 days of incubation in 16 hr photoperiod at $25{\pm}1{\circ}C$. Mean number of roots per shoot was 6 and the mean root length was 252mm. Rooted plantlets were transferred into sterile coir dust:sand (1:4) mixture and maintained in a humid chamber for two weeks, They were gradually exposed to the natural environment. After three weeks they were transferred to pots containing coir dust:sand (1:2) mixture for further development where the 90% survival was observed.