• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.521-526
• /
• 2014

In this study, closed-cell aluminum foam with an initial crack was investigated to produce an axial load-time graph. Using the 10-kN Landmarks of MTS Corporation, a 15-mm/min velocity of mode I shape was applied to the aluminum foam specimen using the displacement control method. ABAQUS 6.10 simulation was used to model and analyze the identical model in three dimensions under conditions identical to those of the experiment. The energy release rate was calculated on the basis of an axial load-displacement graph obtained from the experiment and a transient image of the crack length, and then an FE model was analyzed on the basis of this fracture energy condition. The relation between load and displacement was discussed; it was found that the aluminum foam deformed somewhat less than the adhesive layer owing to the difference in elastic modulus.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.12
• /
• pp.3836-3854
• /
• 2022

The student group division is benefit for universities to do the student management based on the group profile. With the widespread use of student smart cards on campus, especially where students living in campus residence halls, students' daily activities on campus are recorded with information such as smart card swiping time and location. Therefore, it is feasible to depict the students with the daily activity data and accordingly group students based on objective measuring from their campus behavior with some regular student attributions collected in the management system. However, it is challenge in feature representation due to diverse forms of the student data. To effectively and comprehensively represent students' behaviors for further student group division, we proposed to adopt activity data from student smart cards and student attributes as input data with taking account of activity and attribution relationship types from different perspective. Specially, we propose a novel student group division method based on a multi-view student attribute heterogeneous information network (MSA-HIN). The network nodes in our proposed MSA-HIN represent students with their multi-dimensional attribute information. Meanwhile, the edges are constructed to characterize student different relationships, such as co-major, co-occurrence, and co-borrowing books. Based on the MSA-HIN, embedded representations of students are learned and a deep graph cluster algorithm is applied to divide students into groups. Comparative experiments have been done on a real-life campus dataset collected from a university. The experimental results demonstrate that our method can effectively reveal the variability of student attributes and relationships and accordingly achieves the best clustering results for group division.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.9-20
• /
• 2021

Abstraction applied in computer networking hides network details behind a well-defined representation by building a model that captures an essential aspect of the network system. Two current methods of representation are available, one based on graph theory, where a network node is reduced to a point in a graph, and the other the use of non-methodological iconic depictions such as human heads, walls, towers or computer racks. In this paper, we adopt an abstract representation methodology, the thinging machine (TM), proposed in software engineering to model computer networks. TM defines a single coherent network architecture and topology that is constituted from only five generic actions with two types of arrows. Without loss of generality, this paper applies TM to model the area of network monitoring in packet-mode transmission. Complex network documents are difficult to maintain and are not guaranteed to mirror actual situations. Network monitoring is constant monitoring for and alerting of malfunctions, failures, stoppages or suspicious activities in a network system. Current monitoring systems are built on ad hoc descriptions that lack systemization. The TM model of monitoring presents a theoretical foundation integrated with events and behavior descriptions. To investigate TM modeling's feasibility, we apply it to an existing computer network in a Kuwaiti enterprise to create an integrated network system that includes hardware, software and communication facilities. The final specifications point to TM modeling's viability in the computer networking field.

• Industrial Engineering and Management Systems
• /
• v.7 no.3
• /
• pp.245-256
• /
• 2008

In order to cope with the ill-defined problem of human behavior being immanent uncertainty, several methodologies have been studied in game theoretic, social psychological and political science frameworks. As methods to arrange system elements systematically and draw out the consenting structural model concretively, ISM, FSM and DEMATEL based on graph theory etc. have been proposed. In this paper, we propose a modified structural modeling method to recognize the nature of problem. We introduce the statistical method to adjust the establishment levels in group decision situation. From this, it will become possible to obtain effectively and smoothly the structural model of group members in comparison with the traditional methods. Further we propose a procedure for achieving the consenting structural model of group members based on the structural modeling method. By applying the method to recognize the nature of ill-defined problems, it will be possible to solve the given problem effectively and rationally. In order to inspect the effectiveness of the method, we conduct a practical problem as an empirical study: "Behavior analysis of passengers for the Joban line of East Japan Railway Company after new railway service of Tsukuba Express opened".

• KIEAE Journal
• /
• v.8 no.3
• /
• pp.69-76
• /
• 2008

This is an experimental study on the maximum load value and structural behavior of reinforced concrete columns containing shells as a substitute fine aggregate of concrete, through making reinforced concrete test columns with shells. In this study, the main factors consist of the grain sizes and the percentage of substitution of shells to fine aggregate in two kinds of water cement ratio. The results of the study showed as followed. The maximum load value decreased with increased the rate of substitution about shells and as the grain size of shells became smaller, the load values of them were somewhat changed higher but it is important that we must consider absorption rate of shells sufficiently. If we have a proper water cement ratio in column productions containing the shells, we can meet the requirement of the percentage of substitution until 30%. The deflection and deformation properties of reinforced concrete columns with shells represented typical curves like that of normal reinforced concrete. But as the failture types, they are able to make some change without being out of the fundamental graph forms. After the analyzing structural behaviors and the properties of reinforced concrete test columns containing shells, the most excellent grain size of shells represented 3.0mm and less with taking uniformly, and the percentage of practicable substitution of them to fine aggregate was about 30%.

• Hwankyungkyoyuk
• /
• v.23 no.2
• /
• pp.113-128
• /
• 2010

This study investigated ADHD prevalence among the first to sixth graders in ordinary classes of H elementary school located in an area of special rural conditions and selected 4 sixth graders who received high scores in a self-diagnostic test on attention deficit and over 17 points from teachers in an ARS-IV test with a view to verifying the effects of the education in environment on the improvement of maladjusted behaviors among ADHD children when the education program for improvement of maladjusted behaviors is applied to the environment. The program was applied from March to mid-July for about 4.5 months in 13 periods. The program applied consisted of activities of experiencing the nature. Behavior changes of targets during the course of the program were recorded in the frequency of ADHD target behaviors card and the observation log to describe the results, which underwent a comparative analysis through pre-and post-tests of ADDES-SV and to graph the changes in maladjusted behaviors of target children. To sum up, the education in environment resulted in positive effects on the changes of maladjusted behaviors among ADHD children by reducing attention deficit impulsive behaviors and hyperactivity.

• Korean Journal of Materials Research
• /
• v.31 no.8
• /
• pp.471-479
• /
• 2021

The electrochemical reaction between lead borate glass frit doped with Sn metal filler and Ni-Cr wire of a J-type resistor during a term of Joule heating is investigated. The fusing behavior in which the Ni-Cr wire is melted is not observed for the control group but measured for the Sn-doped specimen under 30 V and 500 mA. The Sn-doped lead borate glass frit shows a fusing property compared with other metal-doped specimens. Meanwhile, the redox reaction significantly contributes to the fusing behavior due to the release of free electrons of the metal toward the glass. The electrons derived from the glass, which used Joule heat to reach the melting point of Ni-Cr wire, increase with increasing corrosion rate at interface of metal/glass. Finally, the confidence interval is 95 ± 1.95₉ %, and the adjusted regression coefficient, R in the optimal linear graph, is 0.93, reflecting 93% of the data and providing great potential for fusible resistor applications.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.3
• /
• pp.95-102
• /
• 2009

An architectural space can be considered a life form that interconnects a number of architectural elements such as the humans who live in it. It is difficult to understand and evaluate the complexity of the interrelation between each element, but there have been various attempts to understand and evaluate this architectural space. The Space Syntax that emerged in 1980s has been studied and used more frequently than other methods. Space Syntax is the space analysis tool that analyzes the physical structure of space and represents it as a graph. Space syntax enables its various applications in space analysis by quantifying each spatial property of a whole structure, analyzing it systemically and objectively based on mathematical logic, and representing the results as a quantitative value. Integration of Space Syntax, a widely used index, reflects human behavior in spatial configuration. Meanwhile, there have been various studies in the field of architectural environmental psychology about the relationships between space and human behavior by applying behavioral science to architectural plan. One of the most widely used one is spatial behavior simulation which uses models and simulates the behavioral characteristics to anticipate practical situations and investigate the behavior related spatial problems. In this study, which focuses on the accessibility of the space syntax model, the usefulness of space will be analyzed through the simulation of human behavior that moves through each space. Furthermore, the validity of index will be verified by displaying several examples and compared with integration in space syntax, which represents the usefulness of space.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.7
• /
• pp.159-172
• /
• 2016

This paper presents a novel algorithm for searching evacuation paths in indoor disaster environments. The proposed method significantly improves the time complexity to find the paths to the evacuation exit by introducing a light-weight Disaster Evacuation Graph (DEG) for a building in terms of the size of the graph. With the DEG, the method also considers load balancing and bottleneck capacity of the paths to the evacuation exit simultaneously. The behavior of the algorithm consists of two phases: horizontal tiering (HT) and vertical tiering (VT). The HT phase finds a possible optimal path from anywhere of a specific floor to the evacuation stairs of the floor. Thus, after finishing the HT phases of all floors in parallel the VT phase begins to integrate all results from the previous HT phases to determine a evacuation path from anywhere of a floor to the safety zone of the building that could be the entrance or the roof of the building. It should be noted that the path produced by the algorithm. And, in order to define the range of graph to process, tiering scheme is used. In order to test the performance of the method, computing times and evacuation times are compared to the existing path searching algorithms. The result shows the proposed method is better than the existing algorithms in terms of the computing time and evacuation time. It is useful in a large-scale building to find the evacuation routes for evacuees quickly.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.1
• /
• pp.19-27
• /
• 2011

Recommendation systems are developed to overcome the problems of selection and to promote intention to use. In this study, we propose a recommendation system using adjacency data according to user's behavior over time. For this, the product adjacencies are identified from the adjacency matrix based on graph theory. This research finds that there is a trend in the users' behavior over time though product adjacency fluctuates over time. The system is tested on its usability. The tests show that implementing this recommendation system increases users' intention to purchase and reduces the search time.