• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.122-144
• /
• 1993

The Kimhae napseok clay deposit was studied to characterize its mineralogy and genesis. Geology of the deposit is composed of Tertiary volcanic rocks and granodiorite. Tertiary volcanic rocks consist of andesitic tuff with minor interstratified tuffaceous shale, and rhyodacitic tuff. The main ore body of 2.4 to 4 m in thickness developed parallel to the bedding of andesitic tuff bed. Its strike and dip are $N70^{\circ}E-N85^{\circ}E$ and $16^{\circ}NW-32^{\circ}NW$, respectively. Two alteration zones; the propylitic zone of albite-epidote-chlorite-quartz assemblage and advanced argillic zone of pyrophyllite-dickite-alunite-diaspore assemblage are developed. Correlation of $SiO_2$ to $Al_2O_3$ shows no relation in propylitic zone, while a negative linear relation in advanced argillic zone. Chemical variation shows that $SiO_2$, $Al_2O_3$, MgO, CaO, $Na_2O$ and $K_2O$ were leached out during hydrothermal alteration. Pyrophyllite, the most abundant mineral in advanced argillic zone, occurs as low temperature 2M polytype. It is closely associated with dickite, diaspore and alunite. The Hinckley index of dickite is 0.83 showing moderate crystallinity. Na content is increasing in the M site with the increasing content of cations in the R-site. the mole percent of Na replacing K in alunite ranges from 53.2 to 71.6. It is also found that pyrophyllite grows in the dissolution site of diaspore. Plagioclase was albitized. Lowering of pH caused mainly by sulfide and sulfate decomposition resulted in preferential leaching of Si. It is inferred that aluminum released from plagioclase in the volcanic rocks as well as from the tuffaceous shale intercalated in andesitic tuff were the main sources of aluminum required for the formation of clay deposit. pH in hydrothermal fluid decreased from propylitic zone to advanced argillic zone with increasing degree of alteration. Based on experimental data reported in the literature and mineral assemblages, the formation temperature of the deposit ranges 270 to $320^{\circ}C$.

• 한국해양학회지
• /
• v.30 no.2
• /
• pp.77-90
• /
• 1995

The sedimentary environments and biostratigrapy of the tidal sediments off the Mankyung-Dongjin River estuary were studied based on sedimentary facies and diatom assemblage analysis. Sediment facies from the five vibracores are mainly clay, silt, and sand facies. The clay and silty sediment facies are more dominant than the sandy facies, and contain diatom frustules. The frequency of the diatom frustules are rate to common, but not found in sandy sediment facies. Bigeneric structures such as burrow and non-bigeneric primary sedimentary structures such as laminated sand and mud or silt and mud couplets, flaser bedding, ripple-cross lamination are found in several stratigraphic levels of the sedimentary sequences. A total of 219 species and varieties, belonging to 61 genera has been identified in the present study. Among them, paralia sulcata is the most abundant species about 30 to 50% of the total diatom frustules. Another predominant species are Cyclotella striata. Thalassionema nitzschioides. Actinoptychus undulatus. Delphineis surirella, Raphoneis amphiceros. Most of the diatoms occurred in this study area are marine, marine-brackish water, and brackish water species, and are benthic and tychopelagic or meroplanktonic species. Also, most of the species are coastal to littoral and littoral to inner neritic species. The occurrences of freshwater species, about 1 to 5% is higher than that of the Namyang Bay tidal sediments. The ecological properties of the diatoms occurred in the study area and primary sedimentary structure such as flaser bedding ripple cross bedding indicate that the deposits are formed under coastal or littoral to subeditorial environments such as tidal zone which was subjected to the influenced of stream water and was more strongly influenced by temperate to warm water than cold water. The sedimentary environments have not been changed distinctively during the time of deposition. The vertical distribution pattern of diatoms in the study area is studied by Q-mode cluster Analysis using spss/pc+ (ver.4.0). The results show that the three cores (GE-3, GE-11, GE-12) are divided into two diatom assemblages, respectively. Biostratigraphic correlation using the data of Q-mode Cluster Analysis are attempt in this study.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.4
• /
• pp.91-102
• /
• 2008

This study was conducted to obtain the basic information about Siberia Musk Deer (Moschus moschiferus), and to establish a conservation area for the replacement of Siberia Musk Deer into Mt. Odea National Park, South Korea. We analyzed the main habitat for Siberia Musk Deer restoration in Mt. Odae National Park, Korea. We recorded Siberia Musk Deers' field signs (i.e., bedding sites, feeding areas, feces and tracks), and habitat variables such as nearest distance to the watercourse, trails, slope, aspect, forest type and land cover etc. from Dec. 2004 to Aug. 2007 in Mt. Jiri, Mt. Seorak, and Demilitarized Zone (DMZ). Rocky areas, ridges, mixed coniferous forest (Red pine and Mongolian oak), southern and southeastern slope, elevation of above 800m, and distance from watercourse shorter than 300m etc. were dominant habitat types of Siberia Musk Deer. Based on the significant habitat types, a proper conservation plan should be prepared for the restoration of habitats in order to reintroduce, and to increase the population of Siberia Musk Deer in Mt. Odea National Park, South Korea. Small population size, and limited ecological data are the major constraints for the establishment of conservation areas. Furthermore, other anthropogenic factors including human activities, poaching, and residential area around the park caused the difficulties to qualify as a conservation area. For the successful establishment of conservation area in the future, it is recommended to conduct a comprehensive ecological research, and to survey human disturbances including their impacts on the habitats of Siberia Musk Deer in the Mt. Odea National Park.

• 한국해양학회지
• /
• v.13 no.1
• /
• pp.1-8
• /
• 1978

A seismic reflection Survey was carried out in the offshere area between Geoje Island and Namhae Island, utilizing the echosounder with the frequency 28KHz and thd Uniboom with the filter band 800∼2000Hz. The results show the submarine topography, sedimentary layer structure and the depth distribution of the base rock. The water depth of the sea in the survey area is less than 80m; up to 40m contour line the sea bottom surface has a slight dip(about 1/1000), while in the zone deeper than 40m the bottom topography has a irregular relief. The thickness of the whole sedimentary deposit is about 20∼70m and divided into 3 layers: Upper layer(A layer) with horizontal laminae, intermediate layer(B layer) with cross-bedding and groove structure, and lower layer(C layer) not showing any sedimentary structure on the seismic reflection profile. The surface of the base rock is deeper gradually in the south-eastern part of the survey area and extends to 140m depth. The vertical sediments sequences, composed of B layer and A layer, show the type of transgressive sequences. It is interpreted that B layer was formed at one period when the sea level was lower 40∼60 than the present and ince then, following the rising of the sea level, A layer was deposited.

• Economic and Environmental Geology
• /
• v.8 no.4
• /
• pp.183-201
• /
• 1975

The south and southwestern parts of Jeonra-namdo has been known as an alunite province in Korea. The alunite deposits investigated for the present study are Okmaisan, Seongsam, Bugog, Gasado south, Gasado north, Jangsando, Dogcheon and Jungyongri deposits. The main purpose of this study is to depict the genetical origin of the alunite deposits. The rocks distributed in the areas mentioned above consist chiefly of rhyolitic tuff, breccia tuff and andesitic tuff of Cretaceous age which represent different episodes of volcanic activities during Cretaceous epoch. The attitude of bedding of the tuffaceous rocks varies from place to place but generally dips very gently. The alunite deposits are embedded mostly in the rhyolitic tuff so that they appear as layered deposits, this occurrence may be the result of stratigraphic and lithologic controls. The result of this study can be summarized as below. The mineral sequence studied by the mineral paragenesis and the result of the spectrograph anlyses is such that (1) alunite was formed at first and pyrophyllite was nearly contemporaneous with alunite but pyrophyllite formation can be recognized as a secondary mineralization products, (2) kaoline was succeeded to form later and hematite finally deposited, and (3) pyrite was deposited from the begining to the end of the above mineralization period. The compositional change of host rocks is such that CaO, $SiO_2$ and $Na_2O$ were largely removed from the parent rocks and some $Al_2O_3$ and $SO_3$ were transported by the solution so as to enrich the rocks. The sequencial process of such mineralization has resulted in forming those distinguish mineral zones; alunite, kaoline, pyrophyllite, silicifide and sulphide zone which manifest irregular shape. These deposits were formed by hydrothermal solution which was possibly low temperature and contained sulphuric acid originated from $H_2S$ and $SO_2$ gases.

• Economic and Environmental Geology
• /
• v.11 no.1
• /
• pp.21-37
• /
• 1978

The depositional environment of the Manhang and the Geumcheon Formation of the Pennsylvanian Gomog Croup is revealed to the shallow neritic marine milieu in this paper also as the results of Park (1963), Cheong(1975) and Kim (1976), through the analyses of stratigraphy, paleocurrent, properties of cross-beddings and sedimentational features. The formations contains some possible terrestrial sediments suggesting the paralic environment, which are however not recognized definitely within them. The paleocurrent analysis is made to the Manhang Formation only. The paleocurrent of the formation is known to belong to the shallow neritic longshore current. The paleocurrent analysis is based chiefly on the cross-bedding analysis, and subordinately on the texture of elastic coarse sediments. The paleocurrent mean is determined to $269^{\circ}$, that is, from east to west, of which direction is interpreted to the right angle to the slope of the basinal depository plane and also the parallel with die depositional strike, according to Klein (1960) and Selley's (1968) criteria. The variance value of paleocurrent directions of the Manhang Formation in the whole area studied is 6,374, and the values range from 3,394 to 6,957 according to the dirstricts. The paleocurreut pattern of the whole area shows polymodel, and the patterns in each district range from trimodel to quadrimodel. Those models approach to the shallow marine or paralic model of Tohill and Picard (1966), Picard and High (1968 a), Pisnak (1957) and Pettijohn (1962). The mean value of maximum inclinations of cross-beddings of the whole area is $19.9^{\circ}$ with the standard deviation of 8.4, and ranges from $15.6^{\circ}$ to $21.7^{\circ}$ in the districts. Comparing the histogram showing the frequency distribution of the maximum inclinations of cross-beddings of the Manhang Formation with the Pettijohn's (1962) histogram, it is found that the model approaches to his marine model. The Pennsylvanian Gomog Group of the coalfield is considered to have had been deposited in the pseudogeosynclinal zone on the plateau by the transgression of the Tethyan sea caused by the epirogenic movements during the Pennsylvanian Period.

• Geomechanics and Engineering
• /
• v.30 no.3
• /
• pp.281-291
• /
• 2022

Complex rock masses include various joint planes, bedding planes and other weak structural planes. The existence of these structural planes affects the mechanical properties, deformation rules and failure modes of jointed rock masses. To study the influence of the parameters of a nonpersistent joint network on the mechanical properties and failure modes of jointed rock masses, synthetic rock mass (SRM) technology based on discrete elements is introduced. The results show that as the size of the joints in the rock mass increases, the compressive strength and the discreteness of the rock mass first increase and then decrease. Among them, the joints that are characterized by "small but many" joints and "large and clustered" joints have the most significant impact on the strength of the rock mass. With the increase in joint density in the rock mass, the compressive strength of rock mass decreases monotonically, but the rate of decrease gradually decreases. With the increase in the joint dip angle in rock mass, the strength of the rock mass first decreases and then increases, forming a U-shaped change rule. In the analysis of the failure mode and deformation of a jointed rock mass, the type of plastic zone formed after rock mass failure is closely related to the macroscopic displacement deformation of the rock mass and the parameters of the joints, which generally shows that the location and density of the joints greatly affect the failure mode and displacement degree of the jointed rock mass. The instability mechanism of jointed surrounding rock is revealed.

• The Journal of Engineering Geology
• /
• v.34 no.2
• /
• pp.193-206
• /
• 2024

A standard slope stability analysis was undertaken for new railway sections, based on the slope of sedimentary rock layers and filling material (sand), to evaluate the stability of the cut-off slope in the section passing through a zone of sedimentary rock. The stability analysis was undertaken during the dry and rainy seasons, accounting for earthquake occurrence, based on slope design criteria. It was found that if the slope of the sedimentary rock formation was <10°, the effect on the safety rate of the cut-off slope was insignificant. Furthermore, a slope relief of 1:1.0 or more should be applied with slopes of 10~20°, and 1:1.2 or more with >20°. This study provides an important reference for evaluation of slope stability when railway and road construction is undertaken in areas of sedimentary rock.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.63-70
• /
• 2016

The aim of this study is the safety and an accident prevention in limestone terrain by the underground tunneling. The geology of the study area consists of a Paleozoic sedimentary sequence dominated by limestone, sandstone, shale, and carbonaceous shale. The sequence gently dips to the northeast but the joint contains steep with variable trend. A significant fracture zone is developed in the limestone and shale beds, sub-parallel to bedding, and follows in part the limestone-sandstone contact. Monitoring of groundwater levels in the area shows marked fluctuations in the water table, which repeatedly rose to a level of -4 m before sinking to -15 m. These cycles occurred in mid-May, 2007 and in early and middle June. The data indicate that these fluctuations were unrelated to rainfall that occurred during the study period. We infer that the fluctuations were associated with the development of underground karstic networks along the deep fracture zone, and overlying ground subsidence is likely related to the rapid sinking of groundwater and the associated strong downward suction force.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.643-646
• /
• 2005

The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.