• Animal Bioscience
• /
• v.34 no.9
• /
• pp.1559-1568
• /
• 2021

Objective: Bedding materials directly contact hooves of dairy cows and they may serve as environmental sources of lameness-associated pathogen. However, the specific composition of bacteria hidden in bedding materials is still not clear. The aim of this study was to determine the effect bedding material and its bacterial composition has on lameness of Holstein heifers. Methods: Forty-eight Holstein heifers with similar body weights were randomly assigned into three groups including sand bedding (SB), concrete floor (CF), and compost bedding (CB). Hock injuries severity and gait performance of dairy cows were scored individually once a week. Blood samples were collected at the end of the experiment and bedding material samples were collected once a week for Illumina sequencing. Results: The CF increased visible hock injuries severity and serum biomarkers of joint damage in comparison to SB and CB groups. Besides, Illumina sequencing and analysis showed that the bacterial community of CB samples had higher similarity to that of SB samples than CF samples. Bacteria in three bedding materials were dominated by gastrointestinal bacteria and organic matter-degrading bacteria, such as Actinobacteria, Firmicutes, and norank JG30-KF-cM45. Lameness-associated Spirochaetaceae and Treponeme were only detected in SB and CB samples with a very low relative abundance (0% to 0.08%). Conclusion: The bacterial communities differed among bedding materials. However, the treponemes pathogens involved in the pathogenesis of lameness may not be a part of microbiota in bedding materials of dairy cows.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.1
• /
• pp.33-41
• /
• 2010

Because ammonia from livestock production may substantially contribute to environmental pollution, emissions from all possible sources (housing systems, manure storage, manure application, outside grazing) should be reduced. The purpose of this study was to investigate the effect of different bedding materials on ammonia emissions in a cow house. By applying a combination of four treatment types: treatment $1-T_1$ (sawdust (50%)+sawdust pellets (50%)), treatment $2-T_2$ (sawdust (50%)+corn stalk pellets (50%)), treatment $3-T_3$ (sawdust (100%)), and treatment $4-T_4$ (sawdust (50%)+palm kernel meal pellets(50%)) as bedding materials in a cow house, the effects of such treatments on ammonia flux were assessed in approximately one month. The magnitude of ammonia emissions (mg $m^{-2}\;min^{-1}$) varied in the following order: $T_1$(2.226), $T_4$(2.052), $T_2$(1.845), and $T_3$(1.712). The patterns of pH had a decreasing trend for all bedding treatments during the experiment, and there was no significant relationship with ammonia flux. The results reveal that the most important factor influencing ammonia emissions is the physical structure of the bedding types.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.1
• /
• pp.37-48
• /
• 2021

The automatic-spreader of bedding materials was developed to reduce labor cost, and to achieve successful biosecurity in duck houses. Algorithm of the device was designed to realize a concept of the automatic unmanned operation including entire processes such as loading and spreading of the bedding materials. From the field measurement, the relationship between the expected water content reduction and weight of bedding materials per unit area according to the operation condition of the devices was induced. In the case of the measurement of particulate matters during the process of spreading works, the results of using both conventional manual-spreader and automatic-spreader were exceeded the allowable limit of inhalable and respirable dust, respectively. But, workers using automatic-spreader could be free from harmful aero-condition because they did not stay inside the facility during the spreading works. In addition, from the Duck hepatitis virus PCR test, influence on pulmonary tissue of the duck was not found. It could be expected that the development of the automatic-spreader of bedding materials for duck house can contribute to the advancement of duck breeding facilities.

• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.423-435
• /
• 2010

The purpose of this study was to observe the current consumption of bedding products, purchase behavior, and to compare between purchase criteria and degree of satisfaction after the purchase. Independent variables are age, consumer's knowledge and involvement about the bedding materials. This study can contribute for bedding product marketing strategies and design development. We used questionnaires that were distributed to 500 females aged in 20s to 50s, using stratified sampling method. Only 457 reliable questionnaires were selected for statistical analysis. Data were analyzed statistically through frequencies, paired t-test, ANOVA, Dunnett T3, Chi-test, using SPSS (Version 12.0). The results of this study are as follows. The types of bedroom was significantly associated with age variables. Women in 20's to 30's were using the mixture of Ondol and bed(chimdaie), while 40's to 50's women were using bed for all their rooms. The usage of filling material for the comforter(ibul) was significantly associated with the age group. 20's to 30's age group preferred synthetic fibers for the filling, while 40 to 50's women preferred cotton fibers. Generally, the most of people used quilted comforter and they used cotton material as filling materials of comforters. As to purchase behavior, the most frequent place of purchase was specialty store of bedding products, and the highest percentage of motivation for purchase was "deformation after the use/throwing away". Purchase motivation for bedding was related with the age variable and the clusters based on the knowledge of bedding materials. We analysed the comparison test purchase criteria and satisfaction. In all attributes except brand image, people evaluated lower in satisfaction after purchase than in criteria before purchase.

• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.493-499
• /
• 2009

Recently, the construction of Concrete Faced Rockfill Dam (CFRD) is increasing because rock material resources are plenty in Korea. Bedding zone in the CFRD is necessary enough bearing capacity to support the concrete face slab uniformly and enough impermeability to prevent the loss of fine soils in case of leakage from the concrete slab face. Therefore, cut-off the water leakage in bedding zone securely is the key factor influencing the safety of CFRD. Tested materials satisfied with the specification of particle size distribution at the Bedding Zone area are chosen for conducting permeability tests, which are done to evaluate the property of cut off the materials. Based on the test results, the effects of cut off the materials are investigated by considering the coefficient of permeability, the soil particle distribution, and the dry unit weight. Especially, the relationships between coefficient of permeability with effective size(D10), dry unit weight, and weight passing percent the No.4 sieve are suggested, and also the variation of coefficient of permeability with time are proposed.

• Journal of Animal Environmental Science
• /
• v.21 no.1
• /
• pp.29-34
• /
• 2015

This study was conducted to determine the amount of manure production from Holstein dairy cattle raised in bedded pack barn and the appropriate bedding material removal time. Total six heads of dairy cows (about 715 kg weight) were raised in three pens (two heads per pen) for 62 days. Average daily production of manure containing sawdust bedding was 21.2 kg per head and that of manure excluding bedding was 18.7 kg. Moisture content of bedding materials were significantly increased up to 86% of water holding capacity (WHC) of sawdust during the first 30 days. It kept very stable level after 30 to 50 days. Theoretically, 30 days after adding fresh bedding seems to be proper removal time only based on WHC. On the other hand, from a practical perspective, maximum 50 days after adding new bedding would be fine by comprehensively considering various factors such as bedding material purchasing cost, feeding environment and manure treatment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.444-454
• /
• 2016

This study was designed to examine the characteristics of sawdust and cocopeat bedding materials, including physicochemical properties (Exp. I) and on-farm trial (Exp. II). In Exp. I, the proportion of particle size was in the order of sawdust>cocopeat India>cocopeat Vietnam (p<0.05), and cocopeat contained higher proportion of small particles ($250{\mu}m$+below $250{\mu}m$) than sawdust, causing a dust production problem. Bulk density was cocopeat India>cocopeat Vietnam>sawdust (p<0.05), thus cocopeat treatments showed 4.4 times higher bedding cost than sawdust. The water absorption rates were 702.0% in cocopeat India, 678.3% in cocopeat Vietnam, and 444.0% in sawdust, showing cocopeat had approximately 1.5 times higher water absorption rate than sawdust. Moisture evaporation rates after 12 h of air blowing (2.00 m/s) were higher (p<0.05) in cocopeat Vietnam (80.4%) than sawdust (71.2%) and cocopeat India (72.8%). In vitro ammonia emissions were higher (p<0.05) in sawdust ($2.71mg/m^2/h$) than cocopeat India ($1.59mg/m^2/h$) and Vietnam ($1.22mg/m^2/h$), and total ammonia emissions were higher (p<0.05) in sawdust ($37.02mg/m^2$) than cocopeat India ($22.51mg/m^2$) and Vietnam ($13.60mg/m^2$). In Exp. II, an on-farm trial was conducted with 48 Hanwoo cattle in 16 pens using the same bedding materials as in Exp. I, with fan (blowing 2.00 m/s) and no fan treatments, and feed bunk side (FB) and water supply side (WS) within a pen (4.5 m, $width{\times}9.0m$, length). Beddings were replaced with fresh bedding materials when moisture concentrations were over 65%. No interactions among treatments were detected for moisture concentration and increment rates, and ammonia concentrations, but a significant effect was observed (p<0.01) for each of the treatments. Both concentrations and increment rate of moisture were higher (p<0.01) in the beddings without fan than with fan. Moisture concentrations and increment rate within a pen were also higher (p<0.01) in FB than WS. Thus, the whole no-fan-FB and sawdust-fan-FB were replaced with fresh bedding material between 4 to 5 experimental weeks. The ammonia concentrations and pH of beddings were not significantly different among treatments. Therefore, using cocopeat bedding with a blowing fan can extend twice the bedding utilization period, and WS within a pen showed twice the bedding-life compared to FB. Despite the outstanding characteristics of cocopeat compared with sawdust, using cocopeat as an alternative for sawdust bedding is not recommended for cattle management, considering it has 4.4 times higher bedding cost and a dust production problem.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.11
• /
• pp.1866-1872
• /
• 2020

Objective: The objective of the present experiment was to construct self-draining beds to keep surface bedding materials clean and dry for beef cattle comfort in a temperate climate. Methods: In Experiment 1, a self-draining bed was covered with sand at depths of 10 cm (S-10a), 15 cm (S-15), and 20 cm (S-20) respectively. In Experiment 2, self-draining beds of different sizes were covered with 10 cm of sand (S-10b) and wood shavings (WS) at depths of 15 cm and 20 cm (WS-15 and WS-20). Fifteen cattle were engaged to evaluate the comfort of self-draining beds covered with different bedding materials. Results: No cattle lay in the feed alley and cattle spent more time lying on S-10a than S-15 or S-20 in Experiment 1 (p<0.01). No difference in lying time was detected between S-15 and S-20 (p>0.05). In Experiment 2, no cattle selected the feed alley as the lying area. Cattle preferred WS-15 as the lying area and time spent lying on WS-20 was slightly higher than on S-10b (p<0.05). Feces weight was higher in the feed alley than in the different bedding areas in both Experiments 1 and 2 (p<0.01). Conclusion: Sand-bedding depth at 10 cm and WSs at 15 cm above the self-draining bed can provide for the lying comfort of beef cattle. Design of a special feed alley to hold most of the feces to keep bedding materials clean and dry is desirable for organic beef cattle in a loose barn.

• Structural Engineering and Mechanics
• /
• v.69 no.1
• /
• pp.11-20
• /
• 2019

The biaxial failure mechanism of transversally bedding concrete layers was numerically simulated using a sophisticated two-dimensional discrete element method (DEM) implemented in the particle flow code (PFC2D). This numerical modelling code was first calibrated by uniaxial compression and Brazilian testing results to ensure the conformity of the simulated numerical model's response. Secondly, 21 rectangular models with dimension of $54mm{\times}108mm$ were built. Each model contains two transversely bedding layers. The first bedding layer has low mechanical properties, less than mechanical properties of intact material, and second bedding layer has high mechanical properties, more than mechanical properties of intact material. The angle of first bedding layer, with weak mechanical properties, related to loading direction was $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$ while the angle of second layer, with high mechanical properties, related to loading direction was $90^{\circ}$, $105^{\circ}$, $120^{\circ}$, $135^{\circ}$, $150^{\circ}$, $160^{\circ}$ and $180^{\circ}$. Is to be note that the angle between bedding layer was $90^{\circ}$ in all bedding configurations. Also, three different pairs of the thickness were chosen in models, i.e., 5 mm/10 mm, 10 mm/10 mm and 20 mm/10 mm. The result shows that in all configurations, shear cracks develop between the weaker bedding layers. Shear cracks angel related to normal load change from $0^{\circ}$ to $90^{\circ}$ with increment of $15^{\circ}$. Numbers of shear cracks are constant by increasing the bedding thickness. It's to be noted that in some configuration, tensile cracks develop through the intact area of material model. There is not any failure in direction of bedding plane interface with higher strength.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.470-474
• /
• 1993

This study carried out to get some fundamental data for designing lightweight bedding. In This study, the wool blanket, polyester/cotton blended blanket and down quilt were manufactured with a varied materials, structural factors such as yam count, fabric density respectivelyarn. And also, the thermal insulation value of the bedding were measured by warmth retaining tester. In addition, this paper examines the influence of varying materials, structural factors and blanket layers on the thermal insulation effect of the bedding. The main results obtained from this study are as follow : 1. The design of lightweight blankets make an attempting with a varying materials and structural factors such as yam count, fabric densityarn. 2. Almost, the design of lightweight blankets for polyester/cotton blended blanket and down quilt make an attempting without reduction in thermal insulation values. 3. The 6 layers of blanket have less thermal insulation value than the 6 times of blanket for under a layer have. About 27~32% decrease is observed in thermal insulation value of blanket for under 6 layer. 4. The thermal insulation value and areal weight of blankets have a positive relation between the thermal insulation value(Y) and areal weight(X) is based on the following equation. wool blanket : Y = 1.0850X + 0.4188 (r = 0.9992) PIC blended blanket : Y = 0.8845X + 0.3034 (r = 0.9999)