• Radiation Oncology Journal
• /
• 제31권4호
• /
• pp.228-233
• /
• 2013

Purpose: The aim of this study was to evaluate changes in breast tumor bed volume during whole breast irradiation (WBI). Materials and Methods: From September 2011 to November 2012, thirty patients who underwent breast-conserving surgery (BCS) followed by WBI using computed tomography (CT) simulation were enrolled. Simulation CT scans were performed before WBI (CT1) and five weeks after the breast irradiation (CT2). The tumor bed was contoured based on surgical clips, seroma, and postoperative change. We retrospectively analyzed the factors associated with tumor bed volumetric change. Results: The median tumor bed volume on CT1 and CT2 was 29.72 and 28.6 mL, respectively. The tumor bed volume increased in 9 of 30 patients (30%) and decreased in 21 of 30 patients (70%). The median percent change in tumor bed volume between initial and boost CT was -5%. Seroma status (p = 0.010) was a significant factor in tumor bed volume reduction of 5% or greater. However, patient age, body mass index, palpability, T stage, axillary lymph node dissection, and tumor location were not significant factors for tumor bed volumetric change. Conclusion: In this study, volumetric change of tumor bed cavity was frequent. Patients with seroma after BCS had a significant volume reduction of 5% or greater in tumor bed during breast irradiation. Thus, resimulation using CT is indicated for exquisite boost treatment in breast cancer patients with seroma after surgery.

• 대한환경공학회지
• /
• 제34권8호
• /
• pp.533-540
• /
• 2012

BAC 공정 운전초기부터 부착 박테리아들의 생체량이 정상상태(steady-state)에 도달한 이후까지 $BDOC_{total/rapid/slow}$ 제거율의 변화와 DGGE와 ATP 분석을 통하여 부착 박테리아들의 군집과 생체량을 평가하였다. 용존 유기물질 제거율 평가에 따른 BAC 공정의 정상상태 도달 여부 평가결과를 보면 DOC의 경우 운전 bed volume 27,500 부근에서 BAC 공정이 정상상태에 도달하였고, $BDOC_{rapid}$와 $BDOC_{total/slow}$의 경우는 각각 운전 bed volume 15,000 부근과 32,000 부근에서 정상상태에 도달하였다. BAC 공정의 운전기간 증가에 따른 HPC 및 ATP 농도 분석을 통한 부착 박테리아들의 생체량 평가결과 bed volume 22,500 이후로 거의 일정한 생체량을 유지하였으며, 이 때 HPC와 ATP 농도는 각각 $3.3{\times}10^8$ cells/g 및 $2.14{\mu}g/g$ 정도로 나타났다. DGGE를 이용하여 운전기간 증가에 따른 BAC 부착 박테리아들의 군집분석 결과 운전초기(bed volume 8,916)의 경우 분석가능한 DGGE band 개수가 5개였으나 운전기간 증가에 따라 분석가능한 DGGE band 개수는 최대 11개로 증가하였다. 또한, DGGE를 이용한 박테리아 군집분석 결과 BAC 운전기간의 증가에 따라 다양한 박테리아 그룹들이 존재하였고, Pseudomonas fluorescens, Acinetobacteria와 유사한 uncultured bacterium, uncultured Novosphingobium sp. 및 Flavobacterium frigidarium은 운전초기 단계부터 지속적으로 부착 박테리아 군집을 형성하였고, 전체적으로 Proteobacteria 그룹이 비교적 높은 비율로 우점하였다.

• 한국환경보건학회지
• /
• 제32권2호
• /
• pp.179-185
• /
• 2006

Effect of organic loading rate on UASB performance was evaluated under the renditions of some surface area/reactor volume ratio and different reactor diameter. At the low leading rate of 0.4 kg $COD/m^3{\cdot}d$, reactor performance was not affected by reactor diameter. At the organic loading rate of 6 kg $COD/m^3{\cdot}d$, however, volatile acid accumulation and low COD removal efficiency is observed in reactor having 6.4 cm diameter, while volatile acid is not accumulated at all and high COD removal efficiency is observed in reactor having 3 cm diameter. Such a difference of reactor performance depending on reactor diameter can be explained that sludge bed can be fluidized by evolved gas bubble in narrow reactor, while sludge bed ran not be fluidized by evolved gas bubble only in wide reactor. At a high organic loading rate of 20 kg $COD/m^3{\cdot}d$, it can be judged that there is no relation between reactor configuration and reactor performance because all reactors showed very low COD removal efficiencies regardless of reactor diameter. Narrow and tall type reactor is favorable condition for making sludge bed fluidization at a constant surface area/reactor volume ratio. Thus, it can be judged that reactor configuration and sludge bed fluidization have great influence to reactor performance.

• 한국환경과학회지
• /
• 제22권1호
• /
• pp.25-35
• /
• 2013

The concentration of organic compounds was analyzed at each step of BAC process though $BDOC_{total/rapid/slow}$. Further, bacteria communities and biomass concentrations measured FISH and ATP methods were analyzed. The bed volume (BV) of steady state is different from that of based on assessment of organic compounds removal. Bed volumes in DOC, $BDOC_{rapid}$ and $BDOC_{total/slow}$ removal at steady state were around 27,500 (185.8 day), 15,000 (101.4 day) and 32,000 (216.2 day), respectively. A biomass didn't change after the bed volume reached 22,500 (152.0 day) according to analyzing ATP concentration of bacteria. The concentration of ATP was 2.14 ${\mu}g/g$ in BV 22,500 (152.0 day). The total bacterial number was $4.01{\pm}0.4{\times}10^7$ cells/g at the bed volume 1,150 (7.8 day) (the initial operation) and the number of bacteria was $9.27{\pm}0.2{\times}10^9$ at the bed volume 58,560 395.7 day) that increased more than 200 times. Bacterial uptrend was reduced and bacterial communities were stabilized since BV 18,720 (126.5 day). When BV were 1,150 (7.8 day), 8,916 (60.2 day), 18,720 (126.5 day), 31,005 (209.5 day), 49,632 (335.3 day), 58,560 (395.7 day), a proportion of total bacteria for the Eubacteria were 60.1%, 66.0%, 78.4%, 82.0%, 81.3% respectively. ${\gamma}$-Proteobacteria group was the most population throughout the entire range. The correlation coefficient ($r^2$) between Eubacteria biomass and ATP concentration was 0.9448.

• 대한가정학회지
• /
• 제27권4호
• /
• pp.73-84
• /
• 1989

The purpose of this study is to induce user to use storage equipment as fixed storage space in urban housing. The object of investigation is limited to the resident of detached and apartment house in Daegu, analysised the problems and their attitueds of using storage equipments amount of cloths and bel-clothes. On the basis of these recommended the optimum volume of storage space for clothes and bed-clothes by family types. Applied to the standard of detached house, the optimum volume of storage space for clothes and bed-clothes in each rooms are as following. 1) The volume of master room is ranged 7.34M3 and 8.65M3 the average is 7.97M3. 2) Children's room is ranged 1.18M3 and 3.26M3, the average is 2.51M3 under number of users and their age. 3) The aged room is calculated average 6.53M3.

• 한국수자원학회논문집
• /
• 제50권5호
• /
• pp.289-302
• /
• 2017

발산형 바닥 경사 생성항(DFB, Divergence Form for Bed slope source term)을 엄밀하게 유도하였으며, DFB 중에서 격자의 변에서 평균 수심을 이용하는 mDFB의 오차를 명백하게 입증하였다. 또한, DFB 기법은 바닥 경사 생성항에 대해 정확한 방법임을 밝혔다. 완전히 잠기기 않은 격자에 대한 기존의 체적-수심 관계의 오류를 수정하였으며, C-특성의 충족을 위해 완전히 잠기지 않은 변에 대한 처리가 필요함을 검토하였다. 이 연구를 통해 근사 Riemann 해법으로 천수방정식을 해석할 때 보다 정확한 수단을 제공할 수 있을 것으로 기대한다.

• 한국지반환경공학회 논문집
• /
• 제16권3호
• /
• pp.35-39
• /
• 2015

Dowex 21K XLT 수지를 이용하여 산업폐수 내에 존재하는 금과 납-시안 착화합물에 대한 연속흡착 및 회수 특성을 조사하였다. 충전층에 충진된 Dowex 21K XLT 수지는 0.5mL/min의 유입유속에서 금-시안 착화합물을 520 bed volume까지 95% 이상 연속적으로 제거할 수 있지만, 납-시안 착화합물은 전혀 제거할 수 없었다. Dowex 21K XLT 수지에 흡착된 금-시안 착화합물은 HCl과 Acetone을 7:3의 비율로 섞은 혼합액을 탈착제로 이용하였을 때, 8 bed volume 내에서 96% 탈착되어졌다. 또한 두 번 재사용된 Dowex 21K XLT 수지의 금-시안 착화합물에 대한 bed volume이 490을 유지하여 향후 금 이온을 포함하고 있는 산업폐수 처리공정에 충분히 적용될 수 있을 것으로 판단된다.

• 한국환경과학회지
• /
• 제18권6호
• /
• pp.595-601
• /
• 2009

The effects of the cation-to-anion resin ratio and bed depth on ion exchange performance of mixed-bed were studied at ultralow solution concentration. Breakthrough curves were experimentally obtained for NaCI solution as functions of resin ratio and bed depth. The bed depth affects the pattern of the sodium breakthrough curve but not the chloride breakthrough curve in beds because of the selectivity difference. Resin selectivity determines the shape of breakthrough curves, Some sodium and chloride breakthrough curves crossed at a point as a function of resin ratio. The lower cation-to-anion resin ratio showed the higher effluent concentration or treated volume of the crossover point regardless of the total resin weight.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.51-54
• /
• 2007

This study is aimed to acquire the depth information and measure the water volume of reservoir using the robot-ship equipped with GPS and echosounder. Robot-ship is an automatic system for measuring exact depth and bed topography. According to field experiment results, measured water volume by the robot-ship data was not much exceeding 6.8% in comparison with existing water volume data, and it was guessed because of sediments of reservoir bottom. The robot-ship could be used to acquire economically and exactly the water depth and bed topography of reservoirs, dams, rivers and so on.

• 한국농공학회지
• /
• 제18권1호
• /
• pp.4052-4063
• /
• 1976

The observation and Studies on the two stations in the Ansung river are included that were justified types of Bed-materials movement and were estimated loads volume of sediment applied by sediment rating curve and/or drivel formulars according to both stream conditions. The results of evaluation for above purpose are given as follows 1) Drived formulas for sediment computation in accordance with river situations are given as follows. -Suspended load Yu-chun Ts=135H4.55 Hye-hwa Ts=454H3.71 -Bed load Yu-chun Tb=75.4H191 Hye-hwa Tb=134.5H1.82 2) Annual volume of surface erosion in the catchment area were obtained at yu-chun of 0.236mm Hye-hwa of 0.200mm and mean depth of 0.22mm 3) The Bed-materials movement with water depth were represented that ripple is bellow than 0.067 meter at yu-chun and bellow than 0.096 meter at Hye-hwa stream, Dunes is 0.067-0.22 at yu-chun and 0.096-0.23 at Hye-hwa, Transition is 0.22-0.46 at yu-chun and 0.23-0.58 at Hye-hwa and Antidunes is higher than 0.46 at yu-chun and 0.58 of water depth at Hye-hwa stream