• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.358-368
• /
• 2016

In this paper, for the mechanical beam steering of the Cassegrain antenna, the steering performances of the main reflector tilting method are characterized, and the Cassegrain antenna for the antenna rotating method is designed and its performances are measured. In the Cassegrain antenna operating at W-band, the changes of characteristics due to changes in the sizes of the main/sub-reflectors and other structural changes are analyzed to obtain the structural variables satisfying the performance goal. The manufactured antenna in W-band shows the measured gain of 42.08 dBi, 3 dB beamwidth of $1.32^{\circ}$, $1.14^{\circ}$ and the return loss($S_{11}$) of -23.58 dB at the center frequency of 94 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.842-849
• /
• 2010

This paper deals with a TT&C circularly polarized turnstile antenna for LEO satellites. The turnstile antenna consists of radiator for radiating power to free-space and power divider for generating circularly polarized wave. we presents a radiator to tolerate in space environments and a power divider to provide flat phase difference at wide bandwidth. The bandwidth of the proposed antenna covers the frequency bands of up- and down-link. The antenna shows wide beamwidth and enhanced axial ratio for unfavorable space environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.637-642
• /
• 2020

In this study, the SLB(Sidelobe Blanking)/BLB(Blacklobe Blanking) design of the VHF band radar using the low-frequency band having a relatively larger beam width than the S-band or X-band radar. The antenna of the VHF band has a relatively large beam width, so it is reflected from the side lobe. If the reflected target signal is not processed into sidelobe, the false alarm rate of the radar increases by recognizing it from the main lobe signal. This method of SLB blocking is the elimination of the side lobe signal in the front of the array antenna using the central radiating element of the array antenna, and the blocking of side lobe signal from the antenna rear through BLB receiver block. After completed the radar implementation, The function of blocking of side lobe signals was confirmed through the system unit test by Simulated signal generator. Through this study, it will be used in the implementation of the side-lobe blocking technology of the array antenna for low-frequency band radar with large antenna size and beam width in the future.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.3
• /
• pp.101-109
• /
• 2012

Because the installation problem of parabola antenna that is tilted to 45 degree when this antenna is installed at the area of middle latitude, the study on planar antenna in place of parabola antenna is made rapid progess. Especially, The development of the planar antenna for VSAT is needed depending on the increased Ka-band satellite communications. In this paper, in order to meet with these performances, an array antenna consisting of the vertical polarized waveguide longitudinal slots based on the leaky-wave mode of traveling wave antenna is proposed. Especially, for the lower sidelobe level, the design method of the radiation power distribution control using the different slot widths is proposed. An array antenna consisting of 32 leakywave waveguide antennas is showing 35.16 dBi of gain, 2.5 degree of beamwidth at azimuth, below than -30 dB of sidelobe level, 45.8 degree of beam tilt angle in center frequency 30.2 GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4515-4521
• /
• 2010

A Yagi antenna, which is a typical directional antenna, has been designed and fabricated as a surveillance sensor. The proposed Yagi antenna satisfies the requirements as a surveillance sensor; impedance bandwidth of 7.2-8.2GHz, maximum gain of 7dBi, and 3dB beamwidth of $60^{\circ}$ in the azimuthal plane. The proposed Yagi antenna is designed with 3 directors and one driven element on a dielectric substrate. Also, a microstrip-to-CPS balun is designed and applied to the proposed antenna for balanced feeding of the dirven element. The performance of the proposed antenna has been verified by comparing the simulation and measurement results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.465-470
• /
• 2007

This paper is designed and producted the microstrip patch antenna which used aperture coupled feed structure, and had a comparatively hish gain and headband characteristic with a PCS substitution repeater antenna. The proposed antenna transformed a coupled slot into a H-type in order to improve a characteristic of a general aperture coupled feed antenna. It is this H-type form slot reduces back lobe from the antenna backside at the same time that a coupling between a power feed and patches is iccreased, and to have maximized a gain of an antenna. As a result of having measured the antenna which the VSWR was 1.5 or below and tied up the gain than 7.5dBi in the $1750{\sim}1870$[MHz] that was a PCS substitution, and a beamwidth became in $80^{\circ}$ and radio waves shadow was local, but accomplishment did PCS mobile communication service in building me smoothly, but confirmed what practical use can become.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.27-32
• /
• 2019

This study describes the design and implementation of a simulated signal generator to demonstrate the performance of VHF band radar for the detection of small targets in RCS(Radar Cross Section). The transmission and reception antenna beam widths used in the simulated signal generating apparatus may be large, which may cause problems in the degree of isolation. Interference signal immunity and isolation characteristics are improved by considering operating conditions of VHF radar to solve isolation of antennas. Simulated signal generator performs the following: VHF radar transmission and reception correction, simulation signal generation, target Doppler, RCS and distance simulation, remote control, and GPS clock synchronization function. After the fabrication of the simulated signal generator, the main characteristics, such as the output characteristics and the reflection signal simulations, were tested. When the microwave radar assembly is completed in the future, it will be utilized for the performance evaluation of VHF radar.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.438-444
• /
• 2019

In this paper, we proposed a 16-element array antenna design to improve signal detection performances. The array antenna characteristics, such as mutual coupling, pattern deviation, and half power beamwidth of the active element, were examined to obtain an optimal spacing between individual elements. The single element of the array antenna consists of an indirect feed using L-shaped feed and shorted radiating patch to achieve a broadband operation. Root mean square(RMS) errors based on the incident angle of the signal were calculated to verify the signal detection performance of the proposed antenna. The results demonstrate that the proposed array antenna with optimal spacing is suitable for detecting interference signals with low RMS error.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.83-92
• /
• 2022

This paper analyzes the performance of the IRA(Interferometric Radar Altimeter) by terrain type for estimating reliability of TRN(Terrain Referenced Navigation). The accuracy of the altitude is one of the key parameters of TRN's accuracy. When the antenna of the IRA has wide beamwidth, its altitude accuracy is directly affected by the configuration of the earth's surface. Hence, the accuracy and reliability of TRN can also be affected and may cause ambiguity in positioning. We present analysis data for estimating the reliability of TRN by modeling several topographies and analyzing the performance of the IRA. The results of the analysis are verified by comparison with test data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.65-71
• /
• 2023

In this paper, the design, fabrication and verification steps of an electronically scanned array antenna(AESA) for a photonics-based Ku-band FMCW radar system is described. The presented system consists of a transmitter and a receiver respectively, which has a same antenna in the transceiver. The designed antenna has 2×8 array configuration and operates at Ku-band. The VSWR(Voltage Standing Wave Ratio) of each 16-radiators and the coupling power between radiators is measured. Also, in order to minimize the radar system damage because of handover power from the transmitter antenna to the receiver antenna when the transmitter works, the isolation between the transmitter antenna and the receiver antenna is optimized by test. As a result, beamwidth, side lobe level and beam steering characteristic are obtained by synthesizing each radiator pattern measurement data after each beam pattern of 16-radiators is measured in the near-field chamber.